Buying the right cover for a 24-foot round pool sounds simple, but the wrong choice leaves you with a cover that flaps in the wind or one that won’t reach the anchors. The real challenge is that “24-foot” tells you the pool size, not the cover size. The cover you need depends on the type you’re buying, so measure first and then match your numbers to the right sizing convention.
How To Measure A Round Pool For A Cover
Start fresh with your own measurements instead of trusting the pool’s name. Grab a tape measure long enough to span the full width. Measure the diameter across the center from the inside waterline edge to the opposite inside waterline edge — not the outside lip. The waterline is the widest point your cover actually needs to reach.
If your pool isn’t a perfect circle, measure the longest and widest points. That usually happens with an irregular or odd-shaped pool. Keep the tape level and straight; a sagging tape throws off the reading by several inches.
What Size Cover Does A 24-Foot Round Pool Take?
The answer depends on the cover type, and each one uses a different sizing rule. Here’s how the main categories break down:
- The extra fabric drapes over the top rail and secures with a cable or clips.
- Check the manufacturer’s chart before ordering.
- Safety covers — don’t guess. Most require measuring by perimeter points rather than simple diameter, and the overlap rule changes with pool size and product line.
- Solar covers — these sit on the water surface, so they match the pool diameter closely without the extra fabric.
For round and oval pools, Inyo Pools’ winter cover sizing guide walks through the measurement process by pool shape.
Safety Cover Sizing Is A Different Process
Safety covers don’t follow the simple add-four-feet rule. They anchor to the deck and perimeter, so the measurement method changes entirely. If you’re ordering a mesh or solid safety cover, plan on more detailed measuring.
What The A-B Method Involves
Many manufacturers use an A-B triangulation system. You mark two reference points, labeled A and B, on the pool perimeter. Then you measure from each marked perimeter point to both A and B. Include steps, benches, ladders, and any protrusion in those measurements, plus a sketch of the pool shape. The manufacturer uses those cross-dimensions to build a cover that fits.
For the marking itself, Leslie’s guidance on measuring a safety cover recommends markers at regular intervals around the perimeter and at every obstruction like handrails and slide legs. One common interval is 3 feet between markers.
Overlap And Anchor Rules
Even among safety covers, overlap requirements vary by product and pool square footage. Some standard-size safety covers skip the overlap question entirely — one supplier says to measure length and width and pick the matching size without adjusting.
Anchor placement matters too. The cover needs clearance around the deck edge so the anchors can sit properly, and that gap changes with your pool’s construction. Aqua Magazine’s pool cover measurement guide covers the fit considerations installers check before ordering.
What Size Cover Fits A 24-Foot Round Pool? Quick Reference
| Pool Type | Cover Type | Recommended Size For A 24′ Round Pool |
|---|---|---|
| Above-ground | Winter cover | 28 feet |
| Above-ground | Solar cover | 24 feet |
| Inground | Standard winter cover | ~29 feet (confirm with manufacturer) |
| Inground | Safety cover | Custom — use A-B measurement method |
| Any | Automatic cover | Custom — requires motor side and guide measurements |
Measure your pool’s true diameter first, then confirm against the manufacturer’s chart — most list the pool size range each cover fits.
If you’re ready to buy and want to compare tested options, our roundup of the best covers for 24-foot round pools breaks down top picks by cover type and budget.
Covers are not interchangeable across those categories. A safety cover won’t work where a winter cover belongs, and an automatic cover needs measurements far beyond pool length and width, including guide space, guide length, and motor placement. Match the cover type to your pool’s setup before you measure.
FAQs
Why does a 24-foot pool need a 28-foot cover?
Above-ground winter covers include extra fabric that drapes over the pool’s top rail and secures with a cable. That overlap — roughly four feet of total fabric on a 24-foot round pool — keeps the cover tight and prevents it from pulling loose in wind or heavy snow.
Can I use the same cover size for a winter cover and a safety cover?
No. Winter covers and safety covers use different sizing conventions and installation methods. Safety covers anchor to the deck and often require custom measurements like the A-B triangulation method, while winter covers simply drape over the pool edge with extra overlap fabric.
What happens if I measure outside to outside instead of waterline to waterline?
Outside-to-outside measurements add several inches to your reading, which can push you into the next cover size up. Most manufacturers size covers to the inside waterline edge, so measuring the wider outside dimension can leave you with a cover that fits loosely.
References & Sources
- Inyo Pools. “How To Select The Right Size Winter Pool Cover.” Covers measurement steps by pool shape and winter cover sizing.
- Leslie’s Pool Supplies. “How To Measure A Safety Cover.” Details perimeter marking, A-B measurement, and overlap guidance.
- Aqua Magazine. “How To Accurately Measure And Fit A Pool Cover.” Explains fit considerations and irregular-shape measurement methods.
