35 Quart Trash Can Dimensions: What Size to Expect

A 35-quart trash can doesn’t have one standard exterior size — most standalone bins measure roughly 14 inches wide, 10.5 inches deep, and 18 inches tall.

A 35-quart can holds about 8.75 gallons, and stores typically label it a 9-gallon model. That volume figure tells you next to nothing about whether the thing fits under your sink or inside a pull-out drawer. The exterior numbers control that, and they swing a lot depending on the brand and shape. Grab a tape measure before you order anything.

How Big Is A 35 Quart Trash Can In Inches?

Expect a standalone 35-quart bin to run about 14 inches wide, 10.5 inches deep, and 17.9 inches high. That’s the most common footprint across current US listings, including Rev-A-Shelf’s compact replacement containers. Hardware Resources builds theirs narrower and deeper, so the numbers aren’t universal.

A slim rectangular model like the Hardware Resources CAN-35 measures 9.44 inches wide, 14.5 inches deep, and 18 inches high. Same capacity, different shape. The lesson: match the bin to your space, not to the “35 quart” label.

Why Do The Numbers Vary So Much Between Models?

The biggest gap comes from bin-only versus complete-assembly measurements. A bare 35-quart container is one set of numbers. A pull-out system adds a metal frame and slides, which can push depth from 10.5 inches to 22 inches and height from about 18 to 19.25 inches.

Shape plays a role too. A rectangular bin squeezes into a tight cabinet opening that a round bin can’t. Capacity stays the same because bottle design packs volume differently. Retail listings also round their dimension fields, so you’ll sometimes see both 14.19 × 10.5 × 17.9 inches and 14 × 10.25 × 17.9 inches on the same product page. The manufacturer spec should win when it’s listed.

A few details trip people up:

• Lids. Rev-A-Shelf’s replacement bins are lidless, so add clearance if you need one.
• Compatibility. Rev-A-Shelf bins fit Rev-A-Shelf pull-outs; Hardware Resources bins fit their systems.
• Nominal capacity. “35 quart” is volume, not width or depth or bag compatibility.
• Obstructions. Plumbing, hinges, and door swing can block installs even when nominal space looks fine.

How Do You Measure A Cabinet Before You Buy?

Measure the clear inside opening of your cabinet, not the bin. Pull-out systems also publish a minimum cabinet width — Rev-A-Shelf’s RV-18KD-18C-S wants an opening of roughly 14.5 to 18 inches, and CAN-35-related pull-outs list 15 inches as a minimum.

1. Measure the clear inside width from side to side.
2. Measure the clear inside depth from the front opening toward the back.
3. Measure the clear inside height from the cabinet floor to the lowest obstruction.
4. Compare all three against the complete installed-system dimensions — slides, frame, door clearance, plumbing, hinges, shelf supports included.

When the measurements line up, the bin should slide out without scraping or pinching. If anything rubs, you’ve found the wrong model for that cabinet.

Budget varies by what you’re buying. Replacement bins run from about $33 to $52, while a complete double pull-out assembly listed at $102.89 (regularly $289.99) carries the hardware. A Pulloutor Uso-921 under-sink model lists at $89.99. Once you’ve got your dimensions down, our tested 35-quart trash can roundup can help you match one to your cabinet.

Frequently Asked Questions

Is A 35 Quart Trash Can The Same As A 9 Gallon Can?

Yes, they hold the same volume. One US gallon equals 4 quarts, so 35 quarts works out to about 8.75 gallons, which retailers round up to 9 gallons. The capacity figure tells you how much waste the can holds, not its exterior width, depth, or height.

Can Any 35 Quart Bin Fit My Pull-Out Drawer?

No. Brand matters. Rev-A-Shelf bins are designed for Rev-A-Shelf pull-outs, and Hardware Resources CAN-35 containers pair with compatible Hardware Resources systems. Before buying a replacement, confirm the model number on your existing hardware matches the bin you’re ordering.

Does A 35 Quart Trash Can Come With A Lid?

Not always. The Rev-A-Shelf replacement containers cited here are explicitly lidless, which is normal for under-cabinet bins meant to stay tucked away. If you want a lid or bag compatibility, check the listing carefully before ordering, since those details change the clearance you’ll need.