5 Burner Gas Stove Dimensions | Fit Guide With Real Measurements

Whether it’s a question of fitting a 5 burner gas stove into a 30-inch opening or planning a full kitchen layout, the measurement rules matter more than the model number.

What Counts As A 5-Burner Gas Stove

The term covers two different appliances, and the size difference between them is substantial. A 5-burner gas range is a freestanding or slide-in unit with an oven below, typically about 30 inches wide, close to 36 inches tall at the counter, and 27–29 inches deep. A 5-burner gas cooktop is a countertop insert with no oven, usually built to a 30-inch class but requiring an exact cutout that is smaller than its nominal width.

Cooktops in the 30-inch class need spec-sheet matching for the cutout, since the hole in your counter rarely equals the appliance’s advertised width.

Published Dimensions From Real 5-Burner Models

Model Published Dimensions (H x W x D) Fit Notes
Frigidaire Gallery FGGF3047TF 46.63 x 29.88 x 29.25 in Freestanding range; 30-in fit width
Whirlpool WFG505M0BS 46.25 x 29.88 x 27.2 in Freestanding gas stove, nominal 30 in
GE 500 Series GGF500PVSS 47.25 x 30 x 27.88 in 30-in range with five sealed burners
JennAir JGC3530GS Cutout 20.375 deep x 29.375 wide 30-in cooktop; overall depth 21 in

Heavier-duty options exist. Thermador’s 5-burner ranges hold a 30-inch footprint while offering 24-inch standard or 27-inch commercial depths, which matters if you are fitting a deeper unit into a standard cabinet run.

If you are comparing models for purchase, our tested roundup of the best 5 burner gas stoves covers top picks with real-world notes on each unit.

How To Measure Your Opening Correctly

Take three measurements, and record the smaller number when two sides disagree. This prevents the classic mistake of trusting a tape read from only one side of a slightly crooked cabinet.

  • Cutout width: measure from cabinet to cabinet at the front and back. Use the smaller reading.
  • Cutout depth: measure from the wall to the front of the cabinet, excluding any door trim. Check both sides; use the smaller number.
  • Cutout height: measure from the countertop to the floor on both sides of the opening.

Cooktop clearances vary by model, so the user manual governs final placement.

Clearance And Installation Caveats

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.