Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Brick is fussy, and the screw you pick decides whether your job finishes or your bit burns out halfway through the third hole. That is the whole game with masonry anchors: a sharp diamond point, a corrosion-resistant coating, and a hex head that bites without slipping. Get those three right and you can anchor shelving, fireplace doors, or a Ring camera into brick in one afternoon without a second trip to the store.
I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Some kits hand you a drill bit that dies on the first hole, others hand you 300 screws and a storage case you will actually keep using. The list below covers both, and each entry names the coating, the head style, and the thread design so you know exactly what you are driving into the wall. If you want the short version, the strongest all-round pick for the widest range of brick and block jobs is the Best Brick Screws option that puts a hex head and a diamond tip in the same 100-pack.
Our Picks at a Glance
How To Choose The Best Brick Screws
Brick screws are not the same animal as wood screws, and buying the wrong type is how people end up with a stripped hole and a screw snapped off flush in the wall. These fasteners are self-tapping masonry anchors with a hardened tip and a coarse thread that cuts its own path into concrete, block, or brick. Here is what actually separates a kit that finishes the job from one that fights you.
Match the head to your tool and your job
Hex heads (a six-sided head you turn with a socket or nut driver) are the safest choice for an impact driver, because the socket cannot slip out the way a cross-shaped Phillips bit does. That slip is what chews up the surrounding brick. Flat heads sit closer to the surface, which matters when you are fastening something that needs to sit flush, like a furring strip. Star-drive heads fall in between: the recess grabs the bit firmly, which helps stop the bit from camming out mid-drive.
Read the coating before you buy
A blue epoxy or blue-coated finish is there to stop rust, and rust is the silent killer of an outdoor anchor. Look for a stated corrosion-resistance figure if the job is outdoors or near the coast. The FixMaster set’s blue epoxy coating is rated for 1000 hours of hydrochloric acid corrosion resistance, a spec aimed at damp or hurricane-prone outdoor jobs.
Check the drill bit, not just the screws
Almost every kit here ships with a masonry drill bit, and the bit is where the corners get cut. Two things matter: the length of the bit, and whether the shank is hex or round. A short bit means you cannot reach past a thick fixture, and a round shank can spin in the chuck when you hit a hard patch of concrete. If you plan more than a few dozen holes, budget for a separate masonry bit — nearly every reviewer who drilled a lot ended up buying one.
Quick Comparison
| Model | Best For | Diameter | Length | Head Type | Amazon |
|---|---|---|---|---|---|
| BCP Fasteners 1/4″ x 1-3/4″ Hex Head Diamond Tip★ Best Overall | All-round brick and block anchoring | 1/4 inch | 1-3/4 inch | Hex | Amazon |
| kvohlum 1/4″ x 1-1/4″ Hex Washer Head KitBudget Champion | Budget-friendly starter box | 1/4 inch | 1-1/4 inch | Hex washer | Amazon |
| FixMaster 3/16 x 1-1/4″ Hex Head | Stucco, stone, and outdoor holds | 3/16 inch | 1-1/4 inch | Hex | Amazon |
| Tapcon 3/16 x 2-1/4″ Star Head Climaseal | Code-compliant structural work | 3/16 inch | 2-1/4 inch | Star (bugle) | Amazon |
| SATANTECH 200Pcs Assortment Kit | Occasional jobs that need size options | 3/16 and 1/4 inch | 1-1/4 and 1-3/4 inch | Flat and hex | Amazon |
| GOOBETTER 220Pcs Hex Concrete Screw Set | Big multi-size jobs at home | 1/4, 3/16, 3/6 inch | 1-1/4 to 2-3/4 inch | Hex | Amazon |
| Bonost 300-Piece Assortment Kit | Keeping a full supply on hand | 1/4 and 3/16 inch | 8 sizes | Hex and flat | Amazon |
In‑Depth Reviews
1. BCP Fasteners 1/4″ x 1-3/4″ Hex Head Diamond Tip Concrete Screws, 100 Pack
Our pick — over 4.5★ from 550+ verified ratings; the strongest balance of quality and price.
The 1/4-inch diamond-tip hex head that drives into brick like it was always meant to be there.
At 1/4 inch in diameter and 1-3/4 inches long, this BCP Fasteners pack gives you the thicker anchor that holds heavier fixtures — think fireplace doors, shelving brackets, and framing that has to stay put through weather. Those extra three-quarters of an inch of length over a 1-1/4 inch screw means more thread biting into the brick, so the load is spread deeper into the masonry instead of sitting near the surface.
The diamond-edged point slices into concrete, brick, or block without wandering, and the self-cleaning high-low threads push debris out of the hole as you drive. That self-cleaning is the difference between a screw that seats snug and one that jams up half an inch short. A 1.6-pound box with an anti-corrosion topcoat over carbon steel means these are built to sit outdoors, in damp air, or in harsh weather without seizing in place.
The EnviroSeal blue coating is doing real work here — one of the worst things that happens to a masonry anchor is rust welding it to the wall so you cannot back it out later. Quality is what wins people over: comparing them to pricier versions, buyers report they perform just as well, and the hex head is a clear favorite over Phillips for anyone running an impact driver. The honest catch is the included drill bit. It handles concrete fine, but red brick is a different story — as buyers put it, the bit that came in the box “melted” on red brick, so plan on picking up a dedicated masonry bit if brick is your main surface.
What holds up under load
- 1/4 inch diameter with a diamond-tipped point that penetrates block and concrete quickly
- Anti-corrosion blue coating fights rust through rain, damp, and outdoor exposure
- Hex head pairs cleanly with an impact driver without slipping out of the recess
- High-low threads clear their own debris so the screw seats fully
Where the kit cuts corners
- The supplied drill bit wears out fast on red brick specifically
- Carbon steel body will snap if you over-torque against a stubborn hole
- Short 1-3/4 inch length is a poor fit for fixtures thicker than 1/4 inch
Reach for this if: you are anchoring heavier fixtures into brick, block, or concrete and want the thicker 1/4 inch anchor with a coating that survives the outdoors.
Look elsewhere if: your whole job is red brick — spring for a separate masonry bit first, because the one in the box will not last.
2. kvohlum 1/4″ x 1-1/4″ Concrete Screws, 100 PCS Blue Hex Washer Head Anchor Kit
A hundred anchors, a drill bit, and a hex socket in one box for the price of a fast-food run.
Here is the number that tells the story: that head is a full 0.41 inches across, thanks to the flange or washer head built wide to clamp down on soft surfaces. A washer head spreads its clamping force over more area than a plain hex head, which means it grips thin sheet metal, plastic brackets, or a ramp you are bolting to a concrete pad without pulling straight through the material.
The screw itself runs 1/4 inch by 1-1/4 inches, threaded with a high-low pattern and hardened at high temperature for hardness and anti-rust performance. The whole point of the shorter 1-1/4 inch length is speed — for light fixtures and brackets where a deep anchor is overkill, it drives home fast and the sharp tail starts the hole without wandering. Carbon steel with a Blue Ruspert coating (a rust-resistant surface treatment) keeps it from corroding through a wet season.
What buyers keep coming back to is the completeness of the box — the masonry bit and the hex tool both ship inside, so you can start the moment it lands. That convenience is the reason this kit gets recommended so often, even though a 6-inch masonry bit will out-reach the one included for anything past a thin fixture. The other honest note: the drill bit tends to give out before the screws do, so treat it as a bonus, not the main event.
Best-value read: You are paying entry-level money for 100 anchors plus two tools, which is why this lands as the pick that gets you anchored with the least outlay.
The recurring gripe: That included bit is genuinely short, and it dies well before the box runs out — a separate masonry bit is the smart add-on.
The budget play: first-time DIY jobs, light brackets, and anyone who wants to start fast without shopping for tools separately.
Think twice if: you are driving hundreds of holes — the little bit will not survive, and you will be reaching for a longer replacement anyway.
3. FixMaster 3/16 x 1-1/4″ Hex Head Blue Concrete Screw Anchors (100 pcs Screw Kit)
The stucco-and-stone specialist coated to survive a hurricane season without rusting solid.
This one earns its keep on the coarser side of masonry — block, cinder block, mortar, brick, and stucco — and the smaller 3/16 inch diameter is the tell. At 0.19 inches across, this screw demands a 1/4 inch pilot hole in the fixture, a minimum 1 inch of embedment into the base material, and at least 2-1/4 inches of clearance from any unsupported edge. Ignore the edge spacing and you will crack the block before the screw even tightens.
The coating is where FixMaster leans in. That blue epoxy finish is rated for 1000 hours of hydrochloric acid corrosion resistance, the spec that matters when the anchor lives outdoors in damp or storm-prone air. The body is heat-treated 1022A high-strength carbon steel with wide serrated threads and a diamond point, so it threads straight into the base material and needs no separate anchor sleeve — self-tapping and done.
Buyers who mounted outdoor gear on brick and concrete report these hold tight through a full year outdoors. The one thing worth knowing before you start: the kit ships a drill bit and a screwdriver bit in every box, but the drill bit is not hex-shanked, so a regular chuck can spin on hard masonry. Blowing the dust out of the hole as you drill speeds the bit up enormously, and the tiny masonry bits do wear through over repeated use — one buyer counted a bit giving out after about a dozen holes. Budget for replacements on a big job.
Where it wins: outdoor mounting on stucco, stone, cinder block, and brick where the 1000-hour corrosion rating is the whole reason to buy it.
Know before you drill: fit the drill bit into a hex-shank or a chuck that grips hard, and keep a spare masonry bit on hand for long runs.
4. Tapcon 3/16 x 2-1/4″ Star Head Blue Climaseal™ Concrete Screws, 75 PCS
The 2-1/4 inch name-brand anchor that carries the code approval your inspector wants to see.
Tapcon is the anchor that shows up when the job has to pass inspection, and the reason is on the label: it carries ICC-ES recognition for structural use in concrete and masonry under building codes. When a plan reviewer or an inspector asks what held that bracket on, a recognized structural fastener is the answer that ends the conversation. If your project touches framing, furring strips, or window frames, that stamp matters more than any spec on this list.
At 3/16 inch by 2-1/4 inches, this is the longest screw in the lineup — you get the extra reach for thick furring strips and layered material where a 1-1/4 inch anchor would come up short. The star recess is designed to eliminate bit slips and stop cam-out (the bit jumping out of the head and rounding it off), which is what keeps the finish clean and the head intact. The Climaseal coating paired with the WERCS Treadform thread is built for corrosion resistance across concrete, brick, block, and stone.
Grip is where this shines — buyers mounting into brick describe strong hold with no looseness and a clean, professional finish, and the star head drives securely with good torque. The trade-off to know going in: the star drive with a bugle head is not everyone’s favorite, and while the tooth holds, the heads can break off under hard torque — though that often signals the anchor is biting tightly in the brick rather than failing loosely. The included bit is also a known weak point, so contractors tend to swap in a premium masonry bit and keep the star driver.
Where it justifies the premium: 2-1/4 inches of length plus a recognized structural approval — that combination is why this costs more than a generic 100-pack, and for code work it is money well spent.
Set expectations: the supplied bit underperforms, so bring a quality masonry bit and you will get professional results.
Suit it to: structural fastening, window frames, and any job where the anchor has to satisfy building code — the recognized approval is the point.
Not for you if: you dislike a star-drive recess or only need short, light-duty anchors where a 1-1/4 inch screw does the trick.
5. SATANTECH Concrete Screws with Drill Bit, 200Pcs Assortment Kit
Four screw sizes in one labeled box so a surprise job never sends you back to the store.
The whole appeal here is not one size — it is four. You get 50 flat head Phillips concrete screws at 3/16 x 1-1/4, 50 more flat head Phillips at 3/16 x 1-3/4, 50 hex head at 1/4 x 1-1/4, and 50 hex head at 1/4 x 1-3/4, plus two extra drill bits and a partitioned storage box. For someone who fixes whatever breaks around the house, that spread means the odd job with a thickness you did not plan for still gets anchored tonight instead of next weekend.
The screws are made of 1022A carbon steel with the same diamond tail and high-low thread you want for fast drilling into concrete slabs and brick, and the surface gets a blue ruspert treatment for corrosion resistance. The hand-sorted, clearly labeled case is a small thing that pays off every time you reach for it — no digging through a jumbled pile to find the length you need.
What buyers lean on is the functionality and the value — it is the set that covers an occasional hammer-drill job without a trip to the hardware store, and one owner put it simply: “Several different sizes. You never know when what you have may not fit.” The honest caveats are the flip side of that flexibility. The included bits bend under pressure and several owners mention arriving without one of the promised bits, so check the box on arrival. The flat head is also a matter of taste — fine for many jobs, but not the flush hex fit everyone prefers.
The right call for: a household that wants a stocked box of four sizes ready for whatever anchoring job shows up next.
Check on arrival if: you need both drill bits — a handful of these kits turn up short one bit, and the flat head may not suit every surface.
6. GOOBETTER 220Pcs 1/4″ & 3/16″ Hex Concrete Screw & Drill Bit Set
Seven sizes of hex head in one box, from stubby anchor to 2-3/4 inch reach.
Seven sizes is the headline. The box covers 3/16 x 1-1/4, 3/16 x 2-1/4, 1/4 x 2-1/4, 3/16 x 2-3/4, 1/4 x 1-3/4 (twice over, in two different counts), and more — so whether you are fastening into a concrete slab or a brick wall, there is a length for the material in front of you. All of them carry the deep cutting high-low threads that grip and hold without a separate anchor sleeve and the sharp pointed tips that dig into slabs and brick on contact.
The build is carbon steel with blue rust treatment on the surface, and the set includes two star bits and a three-year-plus service commitment from the maker. The diamond tail is what speeds the drill — those tips bite instead of skating, which is why the hex head drives cleanly with an impact driver. For patios, buildings, and general home anchoring where you want one box that covers a range of jobs, this is a workhorse.
Owners appreciate the variety and the organized presentation — the container keeps the sizes sorted, and buyers who used them for something specific, like a toilet flange repair, found they worked well with supply to spare. The one knock worth knowing: the container ships arranged but can show up jumbled, and a couple of buyers had to reorganize the case before use. By and large this is a well-reviewed set that earns its place as the go-to for the varied home project.
Why the size spread wins
- 7 sizes spanning 1-1/4 to 2-3/4 inches so you rarely lack the right length
- Deep high-low threads grip concrete and brick without extra anchor sleeves
- Two drill bits and a labeled organizer case included
- Sharp diamond tips drive fast with an impact driver
The honest fine print
- The storage case sometimes arrives jumbled and needs reorganizing
- Buyers are still deciding on the strength of the longer bolts
- A whole-box inventory assumes you need this many anchors
Pick this one for: home and patio jobs where the material varies and you want one box with a length for every surface.
Think about it if: the case showing up tidy matters to you — expect to sort it once before you start drilling.
7. Bonost 300-Piece Concrete Screws Assortment Kit, 1/4 & 3/16 in, 8 Sizes
Three hundred anchors across eight sizes — the full shelf for a shop that never wants to run out.
With 300 pieces across eight sizes, this Bonost kit is aimed at the person who anchors things constantly — the handyman, the shop owner, the builder who wants the right length already on the shelf. The application list is wide: wood and metal framing, brackets, electrical boxes, shelving, and fixtures, all on concrete or masonry surfaces. That breadth is exactly why a stocked case beats buying one size at a time for someone working across many jobs.
The hi-low thread design cuts concrete and aligns as it goes, and a nail-type point guides the anchor into the pre-drilled hole without the tip walking off center. The steel is tempered and high-grade for torque and holding power, topped with a corrosion-resistant coating to keep the anchors from rusting shut over the years. Install is as simple as it gets: pilot hole, insert, tighten, and resist over-tightening — that last part is what saves both the concrete and the fixture you are clamping down.
What buyers praise is the functionality and the variety — it is genuinely useful for small projects and the interchangeable dividers keep the case organized for years of use. The case itself is stackable with similar models, a small detail the shop users appreciate. Two honest notes for sizing your expectations: the smallest screws run on the small side and are the ones that tend to snap under force, and the packaging occasionally arrives with the case knocked around. Neither stops it from being a value-strong way to stock a full range.
The stocking-up case: 8 sizes and 300 pieces is a lot of shelf life, and the stackable, re-dividerable case keeps it usable long after a single-size box would be empty.
Mind the small end: the smallest screws are the delicate ones — use the correct pilot bit and do not honk down on them.
Built for: someone anchoring regularly who wants a full eight-size inventory with a case that stays organized and stacks.
Look past it if: you only need one anchor length — a single-size 100-pack gets the job done without the inventory.
Understanding the Specs
Diameter and length
Diameter decides how much hold you get, and length decides how deep that hold reaches. A 1/4 inch screw threads a wider path than a 3/16 inch one, so it carries heavier loads and needs a thicker pilot hole. The 3/16 inch anchor wants a 1/4 inch hole in the fixture. Length works the same way — a 1-1/4 inch anchor is for light, thin fixtures, while a 2-1/4 or 2-3/4 inch screw reaches through thick furring strips and layered material. Whatever the length, plan on a minimum 1 inch of embedment into the base material.
Head and drive type
The head shapes how the tool grabs and how the finished job looks. Hex heads (six-sided, driven with a socket or nut driver) are the safest with an impact driver because the socket cannot slip and chew the surrounding brick. Star drive holds the bit firmly to stop cam-out, and a bugle or flat head sits closer to the surface when you need a flush finish. Phillips recesses are the most familiar, but they are also the most likely to slip and damage the wall around the hole. Washer heads spread clamping force across a wider flange — that kvohlum flange measures 0.41 inches across.
FAQ
Will 1/4 inch brick screws work in a 3/16 inch pilot hole?
Do these screws really work in red brick or only in concrete?
Do I need to pre-drill, or can I drive these straight in?
How deep should the pilot hole go for a brick screw?
What does the blue coating on masonry screws actually do?
Is a hex head better than a Phillips head for brick?
Why did the included drill bit wear out so fast?
Will the hammer drill or a standard cordless drill work with these?
How do I keep the heads from breaking off while driving?
Do brick screws need to be spaced a certain distance apart?
Final Thoughts: The Verdict
The brick screws pick that suits most projects is the BCP Fasteners 1/4″ x 1-3/4″ Hex Head Diamond Tip set, because it pairs the thicker 1/4 inch anchor and the diamond tip that bites into block and concrete with an EnviroSeal coating built to survive the outdoors. If the job has to pass inspection, grab the Tapcon 3/16 x 2-1/4″ Star Head for its code-recognized structural approval and 2-1/4 inch reach. And for a shop that wants every size on the shelf, the Bonost 300-Piece kit answers with eight sizes in a stackable case. That last one is the way to stock up — rated 4.6 and worth grabbing before your next anchoring weekend.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of September 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.