How to Photograph the Aurora Borealis? | Camera Settings That Work

To photograph the aurora borealis, use a DSLR or mirrorless in manual mode with a wide aperture lens on a tripod, starting at ISO 1600 and a 10-second shutter.

Photographing the northern lights comes down to matching three camera settings to what the sky is doing right then. The camera and lens matter, but getting them correctly set matters more — the right exposure on a modest body beats wrong settings on an expensive rig. Here is the gear you need and the exact settings to start with.

Essential Gear for Aurora Photography

A DSLR or mirrorless camera that handles ISO up to 6400 without heavy grain is the foundation. A wide-angle lens — 14 to 24mm with an aperture of f/2.8 or wider — lets in enough light to capture the aurora’s motion and color. Exposures run 3 to 25 seconds, so a sturdy tripod is mandatory; any shake ruins the frame. A remote shutter release or the camera’s 2-second self-timer prevents blur from your finger pressing the button.

Cold weather drains camera batteries fast. Carry two or three spares in an inside pocket close to your body to keep them warm. A red headlamp preserves your night vision and won’t distract other photographers. Check an aurora forecast app with KP alerts turned on before heading out — clear skies and moderate solar activity are what you need. For a closer look at camera bodies and lenses built for low-light work, check our roundup of the best cameras for aurora photography.

Smartphones can work in a pinch. iPhone users can use Night Mode or ProRAW with ISO around 1600 and a 4-to-6-second exposure. Android users need the Pro or Manual mode in their camera app for the same settings. Results are best on bright, active displays.

Optimal Camera Settings for the Aurora

Start with these baseline numbers and adjust as the aurora changes brightness and speed. The table below gives the essential starting points.

Setting Recommended Value Notes
Mode Manual (M) Full control over every exposure variable
File Type RAW Captures full color data for editing
Aperture f/1.4 – f/2.8 Widest your lens supports
ISO 1600 (starting point) 800 if bright; up to 6400 if faint
Shutter Speed 10–15 seconds (start) 3–7s for fast aurora; 10–25s for faint
White Balance 3500–4200K 3850K is a reliable manual preset
Focus Manual Focus on a star via Live View at 10x zoom

Turn off autofocus — it cannot find a target in the dark. Also disable flash, image stabilization, HDR, and long exposure noise reduction. Set white balance manually to avoid the green or purple color casts that Auto White Balance introduces.

How Do You Photograph the Aurora Borealis?

1. Find a dark location. Use a dark-sky map to get away from city lights. Face north. The aurora is visible in high-latitude regions: Alaska, northern Minnesota, Michigan, Maine, Canada, and Scandinavia. Check the local weather — aurora rarely shows through clouds.

2. Set up the camera. Mount it on the tripod and attach the remote shutter. Switch to Manual mode. Set RAW, the widest aperture, ISO 1600, shutter to 10 seconds, and white balance to 3850K.

3. Focus manually. Switch the lens to manual focus. Find a bright star, zoom in 10x using Live View, and turn the focus ring until the star is a sharp point. Tape the focus ring so it does not shift during shooting.

4. Capture and adjust. Use the remote shutter or 2-second timer to fire. Review the image on the camera screen and adjust — if the aurora is bright and fast, shorten the shutter to 5 seconds; if it is faint, raise ISO or lengthen the exposure. NASA’s guide to photographing auroras recommends shooting in bursts because the display can shift dramatically from one second to the next.

5. Avoid the common mistakes. Touching the camera during exposure causes blur. Shutter speeds over 30 seconds turn the aurora into a shapeless green smear. A standard kit lens with an f/3.5–5.6 aperture may not let in enough light — an f/2.8 lens or faster is strongly preferred. If the aurora is invisible to your eye, the camera sensor may still record it, so keep shooting.

FAQs

Can I photograph the aurora with a smartphone?

Yes, if the phone offers manual exposure controls. On iPhone, use Night Mode or ProRAW with ISO around 1600 and a 4-to-6-second exposure. On Android, the Pro or Manual mode in the camera app provides the same controls. Results work best on bright, active aurora.

Why do my aurora photos look green instead of the colors I saw?

Auto White Balance is usually the cause. Switch to a manual white balance setting between 3500K and 4200K — 3850K is a solid starting point. Cameras also record green more readily than the human eye sees it, so some green in the image is normal.

What shutter speed works for fast-moving aurora?

Use 3 to 7 seconds to freeze the detail and shape of rapidly shifting lights. At shutter speeds above 15 or 20 seconds, fast-moving aurora blurs and loses definition. Raise ISO to 3200 or higher if needed to keep the exposure short enough.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.