6 Best 2″ Spacers | Grip the Trail, Don’t Snap at the Joint

Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

The wrong pair of 2″ spacers can turn a weekend upgrade into a wobbly, unsafe gamble with your wheels. You need a solid aluminum block that stays tight and actually grips your truck or ATV’s hub — not a loose part that lets your tire wiggle at highway speed. Here are the six kits that deliver real grip and which ones to avoid cutting corners with.

I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Whether you drive a Ford F-150, a Chevy Silverado, a Jeep Wrangler, or a Honda ATV, these six kits represent the most reliable 2″ spacers you can install today, each matched to its specific bolt pattern and real-world use case.

Our Picks at a Glance

KSP PERFORMANCE 6x135 Wheel Spacers (4 PCS)
Best OverallKSP PERFORMANCE 6×135 Wheel Spacers (4 PCS)4.6★975 ratingsFour forged blocks that bolt your F-150’s wheels steady without any wobble.Check Price on Amazon
dynofit 2 Inch 6x135 Hub-Centric Wheel Spacers (4 Pcs)
Premium Pickdynofit 2 Inch 6×135 Hub-Centric Wheel Spacers (4 Pcs)4.7★446 ratingsGenuine hub-centric design for 2015-2026 F-150s that kills wheel vibration.Check Price on Amazon

How To Choose The Best 2″ Spacers

A wheel spacer is a thick ring of aluminum that bolts to your vehicle’s hub, and then your wheel bolts to the spacer — pushing the wheel outward by two inches. This gives you room for bigger tires, fixes brake caliper clearance problems, and changes the stance of your truck or ATV. But the wrong choice brings vibrations, loose lug nuts, or even a wheel that separates on the road.

Bolt Pattern and Center Bore — the non-negotiable first check

Your vehicle has a specific number of lugs (four, five, or six) and a spacing in millimeters (like 6×135 or 5×4.5). The spacer must match exactly. The center bore — the hole in the middle of the spacer — must match your vehicle’s hub diameter. A hub-centric spacer (one where the center bore fits snugly over the hub) centers the wheel on the metal hub, not on the lug nuts. This eliminates wobble and is much safer than a lug-centric design that relies on the nuts to center the wheel.

Material and stud grade — strength matters under load

Every reputable spacer here is made from forged 6061-T6 aluminum. Forging aligns the metal’s grain, making the part stronger and less likely to crack under stress compared to cheaper cast aluminum. The studs that bolt the spacer to your hub should be Grade 10.9 — a hardened steel rating that handles high clamping forces without snapping. Budget spacers sometimes use weaker 8.8-grade studs, which increases the risk of failure.

Quick Comparison

Model Best For Bolt Pattern Hub Bore Stud Thread Amazon
KSP PERFORMANCE 6×135★ Best Overall F-150 / Expedition perfect fit 6x135mm 87.1mm M14x2 Amazon
dynofit 6×135 Hub-CentricPremium Pick Late-model F-150 vibration-free 6x135mm 87.1mm M14x1.5 Amazon
Rough Country 1101RED Chevy/GMC 1500 trucks 6×5.5″ 3.08″ M14x1.5 Amazon
Rough Country 1101 GM SUV/Truck broad fit 6×5.5″ 3.08″ M14x1.5 Amazon
Dynofit 5×4.5 Jeep / Mustang / Ranger 5×4.5″ (5×114.3mm) 80.5mm 1/2″-20 Amazon
GAsupply 4×110 ATV / UTV budget upgrade 4x110mm 74mm 10×1.25 Amazon

In‑Depth Reviews

★ Best Overall

1. KSP PERFORMANCE 6×135 Wheel Spacers (4 PCS)

Our pick — over 4.5★ from 950+ verified ratings; the strongest balance of quality and price.

6x135mm4-Piece Set

Four forged blocks that bolt your F-150’s wheels steady without any wobble.

This KSP kit gives you a full set of four 2″ spacers right from the start — matched to the 6x135mm bolt pattern (six lugs on a 135mm circle) found on 2004-2014 F-150s and 2003-2014 Expeditions and Navigators. The hub bore is 87.1mm, so the spacer centers itself on the axle hub instead of relying on the lug nuts to hold everything straight. Made from forged 6061-T6 aluminum billet, the build is lighter than a cast part but denser and stronger. Buyers report the machining is precise enough that they feel “zero vibration” even after hundreds of miles. The kit uses hardened 10.9 grade geomet bolts with thread locker (a coating that stops them from loosening) pre-applied, so the risk of bolts backing out is reduced from the first install.

At 19.39 pounds for the set, these are noticeably heavier than the ATV spacers below (which weigh 6.34 pounds for two), but that weight comes from thicker, full-coverage aluminum across four pieces. The recommended torque range is 85-95 FT/LBS, and owners mention that checking them after 500 miles shows the torque holding steady. One owner with a 2021 F-150 V8 installed 2.5″ spacers from the same brand and praised the “easy install, affordable, great quality.” Compared to the dynofit 6×135 set below, this KSP kit covers the older 2004-2014 F-150s and uses M14x2 studs, while the dynofit fits 2015+ models with M14x1.5 studs.

What locks it in

  • Four spacers included — enough for both axles on most trucks
  • Forged 6061-T6 aluminum resists cracking better than cast alloys
  • Pre-installed 10.9 grade geomet bolts with thread locker

Watch for

  • Does not fit F-150 HD or models with a dual rear wheel setup
  • Vehicle fit is generation-specific (2004-2014) — double-check your year

Reach for this if: you drive a 2004-2014 F-150 or Expedition and want a full four-piece set that fits the hub tight from the start.

Look elsewhere if: your truck is a 2015 or newer F-150 — the bolt pattern is the same but the hub bore specs shift, and the dynofit set below is designed for that generation.

Premium Pick

2. dynofit 2 Inch 6×135 Hub-Centric Wheel Spacers (4 Pcs)

Hub-centric87.1mm Bore

Genuine hub-centric design for 2015-2026 F-150s that kills wheel vibration.

This set is built specifically for the 2015-2026 Ford F-150 (excluding 2021+ Raptor), Expedition, and Lincoln Navigator — all with a 6x135mm bolt pattern and an 87.1mm center bore. The key difference from lug-centric spacers is that the dynofit’s precision-machined bore fits over your axle hub like the factory wheel does, so the vehicle’s weight sits on the metal hub, not the studs. Reviewers confirm this eliminates the “wobble at highway speed” that plagues cheaper designs. The forged 6061-T6 aluminum body resists fracture better than cast parts, and the Grade 10.9 Dacromet studs (a corrosion-resistant coated steel stud) are designed to deform under extreme force rather than snap — a safety feature that cheaper kits lack.

Weighing 18 pounds for the four-piece set, compared to the KSP set above at 19.39 pounds, yet they hold the same 2-inch thickness and 87.1mm bore. One detailed buyer review noted that the spacers are actually branded with “KSP” on the bottom, suggesting a shared premium manufacturing source, but the dynofit kit uses M14x1.5 studs (versus the KSP’s M14x2) and covers the newer 2015+ model years. The recommended torque spec is 85-95 foot-pounds, which one reviewer pointed out is lower than the factory 150 foot-pounds, but they confirmed torquing to 90 foot-pounds with the provided thread locker kept everything tight.

What makes it premium

  • True hub-centric fit — centers on the hub, not the lugs, for zero wobble
  • Forged 6061-T6 aluminum with Grade 10.9 Dacromet studs
  • Covers 2015-2026 model years (F-150, Expedition, Navigator)

Study the fit

  • Does not fit 2021+ Raptor models
  • Some buyers prefer the factory 150 ft-lb torque spec over the recommended 85-95 ft-lbs

Best for tight highway driving: if you own a 2015 or newer F-150 and want the safest, most vibration-free hub-centric fit for daily driving.

skip it if: your truck is a 2004-2014 F-150 — the KSP set above is a better fit for that generation.

Best Value

3. Rough Country 2″ Wheel Spacer 1101RED (Pair)

6×5.5″Pair

A red pair that gives your Chevy or GMC 1500 the wide stance for less.

Sold as a pair, this Rough Country spacer fits 88-21 Chevy Silverado and GMC Sierra 1500 trucks with a 6×5.5″ bolt pattern (six lugs on a 5.5-inch circle). The 6061-T6 aluminum construction provides maximum hardening and tensile strength, and the red anodized finish adds corrosion resistance and a visual pop behind the wheel. Installed weight is 13.15 pounds for the pair, and the studs come preinstalled — an estimated install time of one hour. Customers note the red finish looks great on an AT4 and gives the truck a stance that “looked 100x’s better.”

The catch is that this is a two-piece set — you need to order two pairs for all four corners. Some reviewers also note these are not true hub-centric spacers; they fit the bolt pattern but the center bore does not snugly grab the hub, which on some vehicles can cause minor vibrations. One owner mentioned they “fit and work well, should be hubcentric.” Rough Country backs these with a lifetime replacement warranty.

Value highlights

  • Lifetime replacement warranty from Rough Country
  • Red anodized finish adds style and corrosion resistance
  • Pre-installed studs for a quicker install

Know before buying

  • Sold as a pair — you need two sets for all four wheels
  • Not hub-centric; some users report fitment is “alright” not perfect

Grab these for: a budget-friendly two-piece upgrade for a Chevy or GMC 1500’s rear axle, especially if you like the red accent.

Pass if: you are looking for a full four-piece hub-centric kit — the Rough Country 1101 below or the KSP set above serves that better.

Versatile Fit

4. Rough Country 2″ Wheel Spacer 1101 (fits GM 1500/SUV)

6×5.5″Lifetime Warranty

A proven two-inch spacer for Silverados, Tahoes, and Suburbans that buyers have trusted for years.

Rough Country’s model 1101 is the non-red version of the spacer above, designed for a wider range of GM vehicles: 88-20 Chevy Silverado and GMC Sierra 1500, plus 92-20 Tahoe, Yukon, and Suburban. The bolt pattern is 6×5.5″ (also written as 6×139.7mm), with a 3.08″ center bore and M14x1.5 thread pitch. It is precision-machined from 6061-T6 aluminum with preinstalled studs and a corrosion-resistant finish. Sold as a pair, the spacers weigh 13.15 pounds and measure 10 x 8 x 8 inches per pair. One buyer with a 2005 Silverado 1500 reported using these for over two years “without a single problem” after installing them to match the rear wheel offset to the lifted front end.

Unlike the red 1101RED variant, this model uses a machined silver finish that blends with most factory wheels. Reviewers emphasize the importance of retorquing after 100 miles — one owner wrote “Remember to retorque after 100 miles then you’re all set.” The fit is vehicle-specific, meaning the spacer is made to match the GM 1500 hub geometry rather than being a universal part. A buyer noted it “took 20 minutes to install with power tools and a good jack.”

Why it works

  • Vehicle-specific fit for GM 1500 trucks and full-size SUVs (88-20)
  • Lifetime replacement warranty included
  • Proven track record — one buyer went 2+ years with no issues

One thing to know

  • Sold as a pair — budget for two pairs if you need all four corners

Choose this if: you need a vehicle-specific, warranty-backed pair for a Chevy/GMC 1500 or GM full-size SUV and want a proven, long-serving part.

Look elsewhere if: you want a full set of four spacers for both axles — you’ll need to buy two pairs to cover all four wheels.

Jeep & Ford Fit

5. Dynofit 2 inch 5×4.5 Wheel Spacers

5×4.5″80.5mm Bore

The forged spacer that bridges Jeeps and Ford cars with a 5×4.5-inch bolt circle.

If your vehicle uses a 5×4.5 inch (5×114.3mm) bolt pattern and an 80.5mm hub bore, this spacer from Dynofit covers a broad range: Jeep Cherokee XJ, KJ, KK (1984-2013), Wrangler TJ (1997-2006), Grand Cherokee ZJ (1992-1998), plus Ford Mustang (2005-2014), Ranger (1982-2012), Explorer (1990-2018), and several others. The thickness is exactly 2 inches (50.8mm), the stud thread pitch is 1/2″-20, and the recommended torque is 75-85 FT/LBS. The kit includes 20 lug nuts and is made from forged 6061-T6 aluminum with Grade 10.9 Dacromet studs — the same safety-focused design as the premium Dynofit truck spacers above.

Weighing 13.5 pounds for the pair, these are engineered for light trucks and SUVs but also fit sedans like the Ford Taurus and Crown Victoria. Reviewers highlight that the spacers held perfectly on an off-road trailer hauling gear for 600 miles, and another owner called them “very well made” for giving a Jeep the stance it needed. One caution from buyers: “a lot of people putting these on the wrong way have issues” — the spacer has a correct orientation (the studs face outward toward the wheel), and installing it backward can cause fitment problems.

Strengths

  • Wide vehicle compatibility (Jeep, Ford, plus several sedans)
  • Forged 6061-T6 with Grade 10.9 Dacromet studs for safety
  • Includes 20 lug nuts — no separate purchase needed

Orientation matters

  • Must be installed with the studs facing outward — improper install causes problems

Perfect for: Jeep Wrangler TJ or Cherokee XJ owners who want a forged, safety-tested spacer that also fits Ford Rangers and Mustangs.

Not for: 2014+ Jeep Cherokee models with a different bolt pattern — verify your year.

Budget Champion

6. GAsupply ATV 4×110 Wheel Spacers 2 inch (2 Pack)

4x110mm74mm Bore

A lightweight two-piece ATV kit that pushes your Honda or Yamaha’s wheels out for stability.

Built for ATVs and UTVs with a 4x110mm bolt pattern, 74mm hub bore, and M10x1.25 wheel studs, this two-pack spacer set from GAsupply is the lightest option here at 6.34 pounds for the pair — compare that to the KSP F-150 set at 19.39 pounds for four pieces, which makes sense given the smaller scale and quantity. The spacers are CNC-machined from 6061-T6 aluminum billet and use 12.9 grade bolts (one grade higher than the 10.9 used in the truck spacers above). The 2-inch thickness (50mm) adds tire clearance and gives the ATV a wider, more aggressive stance. Buyers confirm it fits a Honda Rancher perfectly, solving brake drum clearance issues, and one owner called them “a must buy” for a Yamaha Grizzly 700, praising the extra stability.

The honest catch involves the supplied lug nuts. One buyer explicitly warned: “The supplied nuts will get ya in an accident. Not enough bite on the studs.” They recommend ordering Tusk extended shank lug nuts instead. Another reviewer used these on a Polaris RZR 170 and noted that 2 inches may have been a bit wide for that model but the spacers worked. If you are handy with pressing studs into the hub, you can upgrade the hardware for better thread engagement. The machining quality is solid — one buyer described the fit as “bolts right up very nice machining.”

What you get

  • Light 6.34-lb pair — ideal for ATVs where weight matters
  • CNC-machined 6061-T6 aluminum with 12.9 grade bolts
  • Fits Honda Rancher, Yamaha Grizzly, and other 4×110 ATVs

The hardware catch

  • Supplied lug nuts lack thread bite — upgrade to extended shank nuts for safety
  • Only fits 10×1.25 studs, not 12×1.25

Best for: ATV owners who want a budget-friendly 2-inch wider stance and are willing to swap the included lug nuts for better ones.

pass on it if: you want a plug-and-play kit with no hardware concerns — look for a set that includes longer, hub-centric nuts.

Understanding the Specs

Bolt Pattern (PCD)

This is the number of lug holes and the diameter of the circle they form, measured in millimeters or inches. If your truck has six lugs on a 135mm circle, you need a 6×135 spacer. An ATV with four lugs on a 110mm circle needs a 4×110. Matching this number is the hard requirement — the wrong pattern simply will not bolt on.

Hub Bore / Hub-Centric Fit

The center hole of the spacer must match your vehicle’s axle hub diameter. A snug fit means the wheel’s weight rests on the metal hub (hub-centric), not on the lug nuts (lug-centric). Hub-centric fit eliminates the wobble that happens when the nuts alone try to center the wheel. For example, a 87.1mm bore spacer on an F-150 fits over the factory hub like the original wheel does, making highway driving smoother and safer.

FAQ

Will 2 inch spacers fit my stock wheels?
Yes, in most cases. A 2 inch spacer moves the wheel outward but does not change the bolt pattern or the hub bore that the wheel sits on — as long as the spacer’s bore and studs match your wheel’s center hole and lug nut seats, your stock wheels will bolt on exactly as they did before, just two inches farther out.
Are hub-centric spacers better than lug-centric?
Yes, for daily driving and highway speeds. A hub-centric spacer has a center bore that fits tightly over your axle hub, so the vehicle’s weight transfers through the metal hub rather than through the lug nuts alone. This prevents the wheel from shifting under load and eliminates vibrations that lug-centric designs often introduce. Most premium truck spacers on this list use a hub-centric design.
Can I put 2 inch spacers on only the rear wheels?
You can, but the handling feel will change. Spacers on just the rear axle widen the rear track without changing the front, which can affect cornering balance. Many truck owners do this to match rear wheel offset to the front after a lift. The KSP and dynofit sets come in pairs or four-piece kits so you can choose which axle to upgrade.
How do I know my bolt pattern and hub bore size?
Measure the center-to-center distance between two opposite lugs on a 4-lug wheel, or from the center of one lug to the center of the opposite lug on a 5- or 6-lug wheel. Multiply that distance by the number of lugs — for example, 6 lugs on a 135mm circle equals 6×135. The hub bore is the diameter of the center hole on your wheel’s backside. Your owner’s manual or a quick online search for your year/make/model usually lists both numbers.
Do I need longer lug nuts for 2 inch spacers?
It depends on the spacer kit. Most spacers come with pre-installed studs that replace your factory studs, and they include matching lug nuts. The GAsupply ATV spacers are an exception — reviewers point out the supplied nuts do not provide enough thread bite and recommend upgrading to extended shank lug nuts. Always check whether the kit includes nuts or expects you to reuse your factory hardware.
What torque should I use on spacer studs and wheel nuts?
Follow the manufacturer’s recommendation printed in the kit instructions. The KSP and dynofit truck spacers specify 85-95 FT/LBS for the spacer-to-hub studs and a similar range for the wheel-to-spacer nuts. The Rough Country spacers suggest using your vehicle’s factory torque spec. After installing, drive about 100 miles then retorque every nut — heat and settling can loosen the initial torque.
Will 2 inch spacers cause my tires to rub?
Possibly, depending on your tire width and suspension setup. Moving the wheel outward by 2 inches reduces the clearance between the tire and the fender or bumper. Some buyers on this list trimmed plastic fender well liners with a pocket knife to stop rubbing. If your tires are already close to the fender, measure clearance before buying. A leveling kit or lift often provides enough extra room.
How long do wheel spacers last?
A well-made forged 6061-T6 spacer with Grade 10.9 studs should last the life of your vehicle if installed correctly and retorqued periodically. Several buyers in this guide reported using Rough Country and Dynofit spacers for two years or more with zero issues. The anodized or machined surface resists corrosion. The only wear point is the stud threads, which are replaceable if damaged during a tire change.

Final Thoughts: The Verdict

The KSP PERFORMANCE 6×135 set gets the top spot because it delivers four forged hub-centric spacers with pre-installed Grade 10.9 studs at a price that undercuts the dynofit — a complete bolt-on solution for 2004-2014 F-150s and Expeditions. If you drive a 2015 or newer Ford half-ton, the dynofit 6×135 Hub-Centric set offers the best vibration-free hub-centric fit for that generation. And for ATV owners, the GAsupply 4×110 spacers give you a lightweight forged pair at a budget-friendly price — just plan on swapping the supplied lug nuts for longer ones.

How We Picked

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources & Methodology

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.

Related Guides

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.