What Is 11×17 Paper Called? | Tabloid, Ledger & ANSI B Explained

11×17 paper is most commonly called Tabloid in North America, but it’s also known as Ledger and officially designated as ANSI B under the ANSI/ASME Y14.1 standard.

If you’ve faced a print dialog asking for “Tabloid” or “Ledger” and wondered whether either matches the 11×17 sheet in your hand, the answer is yes—both refer to the same physical dimensions. The difference is purely orientation: Tabloid describes the page in portrait mode (11 inches wide by 17 inches tall), while Ledger refers to the landscape orientation (17 inches wide by 11 inches tall). Understanding these names saves time on print setup and avoids the costly mistake of ordering the wrong paper stock.

The Three Names For 11×17 Paper

One sheet size, three official labels. Knowing which name your software or printer expects is the key to getting it right the first time.

Tabloid (Portrait). The term comes from newspaper publishing—tabloid newspapers historically printed on 11×17 sheets folded in half. In most North American print dialogs, “Tabloid” means 11×17 in portrait orientation.

Ledger (Landscape). This name originates from accounting and bookkeeping, where wide landscape sheets held rows of financial data. When you see “Ledger” as a paper option, it’s still 11×17 but rotated 90 degrees.

ANSI B (Standard Designation). Under the ANSI/ASME Y14.1 standard, this is officially the B-size sheet. It’s the second size in the ANSI series, sitting between letter (ANSI A, 8.5×11) and tabloid-extra (ANSI C, 17×22). Architects and engineers refer to it as B-size when specifying technical drawings.

11×17 Paper Dimensions: Exact Specs Across Units

The precise measurements matter when setting up document files or buying paper. Even a slight rounding error can cause fit issues on a print bed.

Measurement System Dimension Notes
Inches 11 × 17 Area: 187 sq. in.
Millimeters (exact) 279.4 × 431.8 Rounding to 280 × 432 may cause fit issues
Pixels @ 72 PPI 792 × 1224 Standard screen resolution
Pixels @ 96 PPI 1056 × 1632 Typical monitor DPI
Pixels @ 300 PPI 3300 × 5100 Print-quality resolution
ISO Equivalent A3 (297 × 420 mm) 11×17 is slightly wider and taller

A3 paper is the closest international match but not identical—11×17 is a narrower and longer sheet.

Common Confusions And Mistakes To Avoid

Three mix-ups cause most of the frustration around 11×17 paper. Knowing them in advance saves a ream of wasted sheets.

Ledger vs. Legal (8.5×14). Legal paper is a different size entirely—8.5 inches wide and 14 inches tall. The similar-sounding name trips up many office workers. If you need 11×17, select Ledger or Tabloid, not Legal.

Orientation mislabeling. Selecting “Tabloid” in a print dialog expects the 11-inch edge as the width. If your source file is built with the 17-inch edge as width and you choose Tabloid, the output will rotate or clip. When in doubt, look for a preview icon showing the sheet orientation before hitting Print.

Printer compatibility. Not every standard office printer supports 11×17. Many compact models top out at letter or legal size. Check your printer’s spec sheet for “large format,” “B-size,” or “tabloid” support before loading the tray. ISO-based printers (common outside North America) default to A-series and require manual selection of ANSI B or Tabloid in the driver settings.

Where 11×17 Paper Is Actually Used

This size dominates industries that need room for detail without stepping up to a plotter. Engineering firms use it for technical drawings and blueprints. Architects rely on it for detailed floor plans. Office teams print large tables, Gantt charts, and spreadsheets that would be unreadable on letter-size paper. Historically, tabloid newspapers used the format folded—the size is still the default for school newspapers and small-circulation publications.

If you’re setting up a home office or a small team that frequently produces these documents, the best 11×17 paper options for printers offer guidance on which reams feed reliably without jamming.

FAQs

Is Ledger the same size as Tabloid?

Yes, they are the exact same physical sheet size—11 inches by 17 inches. The only difference is orientation: Ledger is landscape (17-inch side horizontal), and Tabloid is portrait (11-inch side horizontal).

Can a regular office printer handle 11×17 paper?

Not all can. Standard letter-size printers max out at 8.5×14. You need a printer specifically rated for “tabloid,” “B-size,” or “large format” paper. Check the manufacturer’s supported paper sizes list before buying a ream.

How do I print 11×17 on an A4-only printer?

You cannot print 11×17 on a printer whose physical paper path only accepts A4 or letter. Some printers offer tiling (splitting the print across two sheets), but the result requires manual assembly. The practical solution is to use a print shop or upgrade to a wide-format model.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.