Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Video calls freeze, games buffer, and file transfers crawl when your network gets clogged. A 1 gigabit switch eliminates network congestion by giving each wired device its own dedicated full-speed lane, with no software or configuration needed. Which one you should buy depends on how many ports you need, if you need Power over Ethernet, and how much you value a metal build over plastic.
I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you are expanding a home office, connecting a media center, or running IP cameras, this guide helps you find the right 1 gigabit switch for your setup without guesswork or wasted money.
Our Picks at a Glance


How To Choose The Best 1 Gigabit Switch
Before you click buy, there are a few key things to decide based on where and how you plan to use the switch. Here is the short version of what matters most.
Number of Ports: 5 vs 8 (or more)
Think about all the devices you want to wire right now — then add one or two spare ports for future gear. A 5-port switch is great for a desk setup with a PC, console, and printer. An 8-port switch gives you room for a TV, streaming box, game console, NAS, and a few smart home hubs without filling every slot.
Managed vs Unmanaged — Do You Need Control?
Most home and small office users only need an unmanaged switch. You plug it in, connect your cables, and it works — no setup required. A managed or “smart” switch adds features like VLANs (Virtual Local Area Networks) to segment traffic, but unless you are a networking enthusiast or running a small business with specific needs, unmanaged is simpler and cheaper.
Power over Ethernet (PoE): When You Want One Cable to Do It All
PoE (Power over Ethernet) lets the switch send both data and power through a single Ethernet cable. PoE sends both data and power through a single Ethernet cable, eliminating the need for a nearby power outlet for cameras, access points, and VoIP phones. If you plan to install a camera or a ceiling-mounted access point, a PoE switch saves you a lot of hassle.
Build Quality and Noise
A metal chassis helps dissipate heat and feels more durable than plastic, especially if the switch sits in a warm entertainment cabinet or attic. Fanless operation means zero noise — essential if the switch lives in a bedroom, living room, or home office where you do not want a constant whir.
Quick Comparison
| Model | Best For | Ports | Data Transfer Rate | Build | Amazon |
|---|---|---|---|---|---|
| NETGEAR GS308★ Best Overall | Overall home networking | 8 | 1 Gbps | Metal | Amazon |
| D-Link DGS-105Smart Choice | Compact desk setup | 5 | 2 Gbps per port | Metal | Amazon |
| TRENDnet TEG-S83 | High capacity & reliability | 8 | 16 Gbps switching | Metal | Amazon |
| TP-Link TL-SG108 | Value 8-port option | 8 | 1 Gbps | Metal | Amazon |
| TP-Link TL-SG105E | Managed features on a budget | 5 | 1 Gbps | Metal | Amazon |
| NETGEAR GS305P | PoE for cameras & APs | 5 (4 PoE+) | 1 Gbps | Metal | Amazon |
In‑Depth Reviews
1. NETGEAR 8-Port Gigabit Ethernet Unmanaged Essentials Switch (GS308)
Our pick — over 4.5★ from 54,000+ verified ratings; the strongest balance of quality and price.
This eight-port switch delivers quiet, reliable, plug-and-play performance for your entire home network.
You get eight auto-negotiating gigabit ports inside a compact metal case that sits silently on your desk or mounts to a wall. The fanless design means zero hum, and the switch automatically detects the best speed for each device you plug in — whether that is a PC, TV, game console, or printer — using standard Cat5e or Cat6 cables. A pair of built-in status lights on the front let you see link and activity at a glance, so you always know which ports are live.
Unlike the smaller 5-port D-Link DGS-105, this NETGEAR gives you three extra slots, making it a better fit for a living room or home office where several devices need wired connections. The GS308 also supports IEEE 802.3az Energy Efficient Ethernet, which cuts power when ports are idle without slowing things down when you need speed. Buyers report that the upload speed dropped slightly (from about 950 Mbps to 790-800 Mbps) in one setup, but note the difference is barely noticeable in daily use. With over 54,000 ratings and a 4.8 average, this is the most trusted pick on the list for good reason.
Set-and-forget winner: If you need eight reliable gigabit ports with no setup hassle and a metal build that lasts, this is the switch to buy.
A minor trade-off: The 1 Gbps data transfer rate is standard, but it does not match the 16 Gbps switching capacity of the TRENDnet TEG-S83 if you are moving large files between multiple devices simultaneously.
Reach for this if: you want a proven, quiet, eight-port switch with a metal chassis that works from the start and is backed by a huge base of positive reviews.
Look elsewhere if: you need PoE to power cameras or access points — this switch does not provide power over Ethernet.
2. D-Link DGS-105, 5 Port Gigabit Ethernet Switch Unmanaged
This compact five-port switch punches above its weight with built-in QoS and jumbo frame support.
At just 9.6 ounces and 3.95 inches wide, this D-Link is the smallest full-metal switch in the lineup — perfect for a cluttered desk or a tight shelf near the TV. But do not let the size fool you: it supports a data transfer rate of 2000 Megabits Per Second per port (full-duplex) with a non-blocking switching engine that can handle up to 10 Gbps across all ports. That means your PC can pull a large file from a NAS at 115 MB/s while another device streams 4K video, and you will not feel a bottleneck. One reviewer confirmed exactly that, reporting full throughput to their NAS while watching iTunes 4K streaming on another device.
Where this switch really shines is in smart traffic handling. Built-in QoS (Quality of Service) prioritizes voice, video, and gaming packets automatically, so a busy network does not wreck your Zoom call or game latency. It also supports IGMP snooping (a feature that sends video streams only to the devices that request them, reducing network congestion) and jumbo frames up to 9 KB for faster large-file transfers. The D-Link measures 3.95″ x 3.85″ x 1.1″ while the TRENDnet TEG-S83 measures 6.29″ x 0.98″ x 4.29″, the D-Link takes up far less space while offering surge protection (±4 kV) that the TRENDnet does not advertise.
What makes it stand out
- Smart QoS prioritization keeps video and gaming smooth on busy networks
- Surge and ESD protection (±4 kV) adds confidence against power spikes
- Jumbo frame support (9 KB) speeds up large backups and file transfers between a NAS and PC
What to know before buying
- Only 5 ports — if you need 8, look at the NETGEAR GS308 or TP-Link TL-SG108
- No PoE support, so it cannot power cameras or access points through Ethernet
For the desk or media center: choose this if you want a tiny, surge-protected switch with smart traffic prioritization for streaming and gaming.
A real limitation: with only 5 ports, you will run out of slots quickly if you plan to connect more than a few devices.
3. TRENDnet 8-Port Gigabit Desktop Switch, TEG-S83
The eight-port switch with a 16Gbps backbone that gives every device breathing room.
Choose this switch if you frequently transfer large files between multiple devices simultaneously, such as a NAS, media server, gaming PC, and 4K TV. The TRENDnet TEG-S83 has a 16Gbps switching capacity (versus the 1 Gbps rate of the NETGEAR GS308), which means the internal fabric can handle far more traffic without slowing down. That translates to smoother simultaneous transfers in a busy home office. The forwarding rate of 11.9Mpps (million packets per second) at 64-byte packet size tells you how quickly it processes small data chunks — important for real-time tasks like video calls.
Owners mention that after replacing an old switch with this TRENDnet, their Xfinity speed test increased to over 700 MBTS. At 14.6 ounces, at 14.6 ounces versus 9.6 ounces for the D-Link DGS-105, but that extra heft comes from the sturdy metal enclosure that helps with heat dissipation. It also includes TRENDnet’s Lifetime Manufacturer Protection and is NDAA and TAA compliant (standards required for U.S. government installations). All eight ports are on the back with LEDs on the front, keeping cable management neat.
For the heavy user: if you regularly transfer large files between multiple wired devices, the 16Gbps switching capacity keeps everything moving without hiccups.
One thing to consider: the 14.6-ounce weight and larger footprint (6.29″ x 0.98″ x 4.29″) make it less ideal for a cramped desk or travel than the much smaller D-Link DGS-105.
Best for power users: gamers editing video, photographers backing up to a NAS, or anyone running a multi-device home office where bandwidth is king.
skip it if: you only need a simple 5-port switch for a TV and console — you will pay for switching capacity you never use.
4. TP-Link 8 Port Gigabit Ethernet Network Switch (TL-SG108)
This budget-friendly eight-port switch delivers real gigabit speeds in a rock-solid metal chassis.
If you need eight ports but want to keep costs low, the TP-Link TL-SG108 is the value champion. It gives you the same port count as the NETGEAR GS308 at a lower price point, in a sturdy metal housing with shielded ports that help reduce electromagnetic interference. The fanless design keeps noise at zero, and it draws just 2.77 watts of power maximum so it stays cool to the touch even after running for days. The compact footprint (6.2″ x 4″ x 1″) fits easily on a shelf or mounts to a wall using the included hardware.
Reviewers consistently highlight how simple it is: plug in the power adapter, connect Ethernet cables, and every device comes online instantly. One buyer tested it with a wired camera setup and reported a ping under 1ms, solid build quality, and no heat issues — even handling a 70 Mbps video feed while a PC and Smart TV were also connected. It is unmanaged, so you get no VLAN setup or traffic monitoring, but for a pure “connect and forget” home network expander, this is tough to top.
Why it earns its spot
- 8 ports in a compact metal case at a very accessible price
- Ultra-low power draw (2.77W max) keeps electricity costs and heat down
- Shielded ports add extra durability and signal integrity
Where it falls short
- No PoE support — cannot power cameras or access points over Ethernet
- No managed features like VLANs or QoS for advanced traffic control
The smart spend: choose this if you want eight reliable gigabit ports on a budget without sacrificing metal build quality.
A fair compromise: you give up advanced features like jumbo frame support and QoS that the D-Link DGS-105 offers, but for most home networks, you will never miss them.
5. TP-Link 5-Port Gigabit Ethernet Easy Smart Switch (TL-SG105E)
This five-port switch offers VLAN support for users who want more network control without paying for a fully managed switch.
This is the pick if you want the simplicity of plug-and-play but also the option to tweak network settings later. The TL-SG105E is TP-Link’s “Easy Smart” switch, meaning it works unmanaged from the start but gives you a web interface for setting up VLANs (Virtual Local Area Networks) to separate traffic — handy if you want to keep guest Wi-Fi on a different network from your home devices or isolate IoT gadgets. The 5 auto-negotiating ports (10/100/1000Mbps) support full-duplex on each connection, and the metal chassis stays cool even after extended use, as reviewers have noted.
One reviewer found the VLAN implementation limited because it only supports numbered VLANs (1-5), not the alphanumeric VLAN names used by some UniFi routers, so it may not suit every advanced setup. For most users, however, the plug-and-play performance is excellent. The switch handles multiple devices simultaneously — streaming a video, gaming, and web browsing — without any slowdown, and the fanless operation means it produces zero noise. At 0.43 kilograms and 3.9 inches square, it takes up almost no space on your desk.
A step up in control: if you want the option to segment your network with VLANs later, this gives you that flexibility at a much lower price than a full managed switch.
Not for pure simplicity: if you never plan to use VLANs, a cheaper unmanaged 5-port switch like the D-Link DGS-105 gives you better QoS and surge protection for less money.
Ideal for the tinkerer: someone who wants a basic switch today but may want to experiment with network segmentation down the road.
One real caveat: the numbered VLAN limitation (1-5 only) means it may not fully integrate with routers that use alphanumeric VLAN names, so check compatibility if that matters to you.
6. NETGEAR 5-Port Gigabit PoE Switch (GS305P)
This five-port switch powers your cameras and access points directly through the Ethernet cable.
This is the switch you reach for when you are installing IP security cameras, ceiling-mounted Wi-Fi access points, or VoIP phones in places where there is no power outlet nearby. The NETGEAR GS305P has 5 gigabit ports, and 4 of them are PoE+ (Power over Ethernet Plus) ports with a total power budget of 63 watts. That means each PoE+ port can deliver up to about 15 watts — enough to power most cameras and access points — and if one device uses less power, the unused power is dynamically redistributed to the other PoE ports. One IT professional who regularly uses these for camera installs noted that it is very convenient to plug in multiple cameras in an area to configure and aim them before switching to the main cable runs.
The switch is unmanaged, so it is truly plug-and-play — no software, no configuration. The metal housing and fanless design keep it silent and cool. Unlike any other switch in this lineup, the GS305P also features a port-isolation mode that separates each port from the others (emulating separate VLANs), while each port remains visible to the uplink. This is a rare and useful security feature for a simple unmanaged switch, especially if you want to keep devices from talking to each other on the local network.
Key strengths
- 4 PoE+ ports with 63W total budget — powers cameras, access points, and phones through a single cable
- Dynamic PoE allocation redistributes unused power to devices that need more
- Port isolation mode separates each port from others for added network security
Key limitations
- Only 5 total ports, and only 4 are PoE+ — if you need 8 PoE ports, look elsewhere
- No managed features like VLAN configuration beyond the port isolation mode
The PoE specialist: get this if you are installing cameras, access points, or any device you want to power through the Ethernet cable itself, without needing a separate power source.
Not for general use: if you do not need Power over Ethernet, you will pay extra for a feature you never use — pick the TP-Link TL-SG108 or NETGEAR GS308 instead.
Understanding the Specs
Switching Capacity vs Data Transfer Rate
Switching capacity (often called “switching fabric” or “backplane bandwidth”) is the total amount of data the switch can handle internally at once — think of it as the size of the pipe inside the box. A high switching capacity, like the TRENDnet TEG-S83’s 16 Gbps, means all ports can run at full speed simultaneously without slowing each other down. Data transfer rate per port, like 1 Gbps, is the speed limit on each individual connection. Both numbers matter, but switching capacity tells you how well the switch performs under a full load.
Unmanaged vs Smart vs Managed
An unmanaged switch is pure simplicity: plug it in and it works, with zero settings to adjust. A smart switch (like the TP-Link TL-SG105E) looks and acts like an unmanaged switch from the start but lets you log in to a web interface to configure features like VLANs (splitting your network into separate virtual groups) or traffic prioritization. A fully managed switch gives you complete control over every aspect of network traffic, but it is overkill and far more expensive for a typical home or small office setup.
Power over Ethernet (PoE)
PoE (Power over Ethernet) sends electrical power along the same Ethernet cable that carries data. This lets you install devices like security cameras, Wi-Fi access points, and VoIP phones in locations where there is no power outlet — like a ceiling corner or an exterior wall. PoE+ (802.3at) delivers up to 30 watts per port, enough for more power-hungry equipment like pan-tilt-zoom cameras or high-performance access points. The total PoE budget (e.g., 63W on the NETGEAR GS305P) is the maximum power the switch can deliver across all PoE ports combined.
QoS and Jumbo Frames
QoS (Quality of Service) lets the switch prioritize certain types of traffic, like video calls or game data, over less time-sensitive traffic like file downloads. This prevents a large download from making your Zoom call stutter. Jumbo frames let a switch handle larger data packets — typically up to 9 KB instead of the standard 1.5 KB — which can improve throughput for large file transfers between a computer and a NAS (Network Attached Storage) by reducing the number of packets the CPU has to process.
FAQ
Do I need a managed or unmanaged 1 gigabit switch?
Will a 1 gigabit switch slow down my internet speed?
Can I use a 5-port switch to expand my 8-port switch?
What does a fanless design mean for a network switch?
How many watts of PoE power do I need for cameras and access points?
Is a metal or plastic switch housing better?
What is jumbo frame support and do I need it?
Will an unmanaged switch work with any router or modem?
What does a “non-blocking switching engine” mean?
Final Thoughts: The Verdict
For most people, the 1 gigabit switch winner is the NETGEAR GS308 because it delivers eight reliable ports in a quiet, metal chassis backed by over 54,000 five-star ratings. If you want advanced traffic management and surge protection in a tiny footprint, grab the D-Link DGS-105. And for powering cameras or access points over a single cable, the standout is the NETGEAR GS305P with its 4 PoE+ ports and 63W budget.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.




