What Is a 5th Wheel Connection? | Kingpin & Coupler Basics

A 5th wheel connection couples a pickup truck to a large trailer using a 2-inch steel kingpin on the trailer that locks into a jaw mechanism mounted in the truck bed over the rear axle.

If you’re towing a large RV or toy hauler with a pickup, you’ve probably heard the term “fifth wheel.” The connection point between your truck and that heavy trailer is a 5th wheel hitch, a design that’s been hauling loads for over a century. It’s different from a standard bumper hitch or gooseneck, and for good reason: it places the trailer weight directly over the truck’s rear axle for superior stability. Let’s break down exactly how it works, the parts involved, and what you need to know before buying one.

How A 5th Wheel Coupling Actually Works

The fifth wheel connection (the term “fifth wheel” comes from an 1800s carriage component) uses a straightforward locking system. The trailer has a vertical steel pin, called the kingpin, which is exactly 2 inches in diameter. The truck bed has a horseshoe-shaped platform, the fifth wheel plate, with locking jaws inside. When you back the truck under the trailer, the kingpin slides into the jaws, which snap shut to capture it.

The hitch mounts over or just ahead of the rear axle, which distributes the trailer’s weight directly over that axle. This gives the truck better control, less sway, and a more planted feel compared to a bumper-mounted hitch.

5th Wheel vs. Gooseneck: What’s The Difference?

Though they both mount in the truck bed, a 5th wheel and a gooseneck hitch work differently. A 5th wheel uses that kingpin-and-jaw system and is the standard for RVs, campers, and toy haulers. A gooseneck uses a ball-and-coupler system, typically a 2-5/16″ ball mounted in the bed floor, and is common for commercial trailers and livestock. Gooseneck trailers do require safety chains — a key difference.

The Andersen Ultimate 5th Wheel Connection blends both designs. It’s a lightweight adapter that lets you drop a fifth-wheel trailer onto a standard gooseneck ball. You attach a female coupler adapter to the trailer’s kingpin, then lower the coupler onto the ball. It’s particularly useful for short-bed trucks because it’s compact and rail-free. If you’re exploring this route, check our tested roundup of the best 5th wheel adapters to see which models hold up best.

Installing A 5th Wheel Hitch In Your Truck

Installation depends on whether your truck has a factory puck system. If it does, you might need only a set of base rails in the bed. If not, you’ll be drilling into the truck bed to mount the base rails. The hitch head then sits on the rails and is secured with pins or bolts. The tools needed are standard: socket set, crescent wrench, torque wrench, ratchet, a drill with bits, and a tape measure. One common mistake is misaligning the rails, which can cause the hitch to slip or misconnect.

For the Andersen Ultimate, you need a gooseneck ball installed in the bed first OR use Andersen’s own Bed Shafts. Attach the adapter to the trailer’s kingpin, then simply lower it onto the ball. The pyramid design raises the ball to the correct fifth-wheel height. The big advantage is that you can remove the entire thing to reclaim your full truck bed.

Common Installation Mistakes To Avoid

  • Turning clearance on a short bed: If you don’t check clearance, the trailer nose can hit the truck cab during sharp turns.
  • Under-ratng the hitch: Pick a hitch rated for at least 20% above your trailer’s GVWR. Using one with insufficient capacity is dangerous.
  • Skipping chains on a gooseneck: While the Andersen is exempt (classified as a fifth wheel), standard gooseneck trailers absolutely require safety chains.

FAQs

Why is it called a “fifth wheel”?

The name dates back to 1800s horse-drawn carriages. A horizontal wheel was placed on the front axle to allow the carriage to pivot. The hitch component on modern trucks resembles that original “fifth wheel.”

Do I need a fifth wheel hitch for a small camper?

No. Fifth wheel hitches are designed for larger trailers (RVs, toy haulers). Smaller campers typically use a standard bumper hitch with a ball mount. The fifth wheel system is overkill for anything under about 8,000 pounds GVWR.

Can I pull a 5th wheel trailer with a short-bed truck?

Yes, but you need a hitch designed for it — like a sliding fifth wheel hitch or a model made for short beds. Standard fixed hitches on a short bed can let the trailer cab hit the truck cab during turns. The Andersen Ultimate works well here.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.