Set an 8BitDo controller to X-Input mode, then connect via USB-C, 2.4GHz wireless, or Bluetooth — each model has its own pairing steps.
How to connect an 8BitDo controller to a PC comes down to setting the physical mode switch to the right position. 8BitDo makes versatile third-party controllers that work beautifully with Windows once the input mode is correct. With the switch set to X-Input (labeled X on most models), Windows recognizes the controller as a standard Xbox-style gamepad with no extra drivers. You then have three connection options — wired USB-C, the included 2.4GHz wireless dongle, or Bluetooth — and the best choice depends on your model. See our roundup of the best 8BitDo controllers for PC gaming for comparisons on features, price, and compatibility.
Which Mode Switch Does Your Controller Need?
Every 8BitDo controller has a physical switch on the back or top that selects the input protocol. Getting this wrong is the most common reason a controller won’t connect to a PC.
- X (or SX) — X-Input mode, standard for Windows. Games, Steam, and Xbox Game Pass detect it automatically.
- D — DirectInput/Bluetooth mode. Use for Bluetooth pairing on a PC or Android devices.
- S — Switch mode for Nintendo Switch. Won’t work on PC.
- A — Android mode, not useful for PC.
For standard PC gaming, set the switch to X before powering on. The exception is Bluetooth pairing, which requires the D position on supported models like the Ultimate Wireless and Pro 2.
Connecting an 8BitDo Controller: 2.4GHz, Bluetooth, and USB-C
Each method has a different setup flow. The table below shows the recommended approach for every current model:
| Model | Best PC Connection | Setup Note |
|---|---|---|
| Ultimate Wireless | 2.4GHz dongle (in dock) | Switch to X; Bluetooth needs firmware v2.00+ |
| Ultimate 2C | 2.4GHz dongle or Bluetooth | Switch to 2.4G or Bluetooth/D; press Home to power on |
| Ultimate 2 Wireless | 2.4GHz wireless | Charging dock included; 2.4G is default PC mode |
| Pro 2 | Bluetooth or USB-C | Optional 2.4GHz adapter sold separately |
| Pro 3 | 2.4GHz dongle or Bluetooth | TMR joysticks; 250Hz wired polling rate |
| SN30 Pro | Bluetooth or USB-C | Classic design; Bluetooth wireless only |
2.4GHz Wireless — Plug the USB-C dongle into your PC and press the Home button. Pairing is automatic — the LED glows solid once connected. The Ultimate Wireless and Ultimate 2C store the dongle inside the dock. The Ultimate 2 Wireless uses 2.4GHz as its default PC mode with no extra setup.
Bluetooth — Switch to D mode. Hold the Star/Pair button for 3 seconds until LEDs blink rapidly. On the Ultimate Wireless, it’s the Star key; on the Pro 2, it’s the Pair button labeled P. Open Settings > Bluetooth & devices > Add device and select the controller name (e.g., “8BitDo Ultimate Wireless”).
USB-C Wired — Connect the cable to both devices. The controller is recognized immediately as an Xbox 360/One controller with no driver installation needed, and it charges while connected. This works on every model and offers the lowest latency — the Pro 3 polls at 250Hz over USB.
Software, Firmware, and Common Fixes
The free 8BitDo Ultimate Software for Windows lets you remap buttons, adjust stick/trigger sensitivity, create up to four custom profiles, and update firmware. To enter firmware update mode, hold L + R + Start while connecting via USB — the top LED blinks red.
Common pitfalls and fixes:
- Wrong mode switch: If Windows doesn’t see the controller, the switch is likely on S or A instead of X (or 2.4G when using the dongle).
- Bluetooth pairing fails: Confirm the switch is in D mode. Some models allow force input changes with B + Home or X + Home.
- Dongle not detected: Use the correct dongle for your model — Ultimate Wireless dongles aren’t interchangeable with Pro 2 dongles.
- Ultimate Wireless Bluetooth needs firmware v2.00: If pairing fails, update firmware using the Ultimate Software.
- Game Bar notification missing: On Windows 11, reinstall Xbox Game Bar or toggle it off/on in Windows Terminal (Admin mode).
FAQs
Do all 8BitDo controllers work with Windows?
Yes, every current model works with Windows 10 (version 1903 or later) and Windows 11. Set the physical switch to X for X-Input mode — Windows then recognizes it as a standard gamepad without extra drivers.
Can I use an 8BitDo controller wirelessly without a dongle?
Yes, if your model supports Bluetooth. The Ultimate Wireless, Ultimate 2C, Pro 2, Pro 3, and SN30 Pro all connect via Bluetooth. Switch to D mode, hold the Pair button for 3 seconds, and select it in Windows Bluetooth settings.
Why won’t my PC detect my 8BitDo controller?
The most common cause is the mode switch. Set it to X (or 2.4G for dongle-based models). Also check the battery charge and that the USB dongle is fully inserted. If issues persist, update firmware using the 8BitDo Ultimate Software.
References & Sources
- 8BitDo. 8BitDo Support Portal Official firmware updates, software downloads, and troubleshooting guides for all 8BitDo controllers.
