How to Make a Clamp in Fusion 360? | Sketch, Extrude & Thread

Modeling a clamp in Fusion requires sketching the profile, extruding the body, and adding threads and joints — no single ‘Clamp’ command exists.

A clamp looks simple — two jaws that squeeze — but modeling one in Autodesk Fusion takes a deliberate sequence of separate operations. There’s no single “Clamp” button, so knowing how to make a clamp in Fusion 360 means combining sketching, extruding, threading, and joints in the right order. The workflow works for 3D-printed, hinge, C-clamp, and G-clamp designs with minor geometry tweaks per type.

Fusion’s free Personal Use plan includes every tool needed, so you can follow along without a paid subscription.

What Units and Components Do You Need First?

Before drawing a single line, create a new component. Right-click the Bodies folder or use the Create menu and select New Component. Name it “Clamp Body” — a body created outside a component can’t be moved or receive joints, and fixing it means starting over.

Set document units under Document Settings. Millimeters are standard for Fusion clamp tutorials and 3D printing. Typical starting dimensions include an 85mm outer circle, a 15mm bolt hole, and a 10mm jaw gap. Switch units before sketching — changing mid-design causes dimension errors.

Choose a sketch plane last. The front or top plane works for most clamp designs. Click Create Sketch and pick your plane to begin.

How to Model the Clamp Body and Threads

Draw the jaw profile with the Line and Circle tools. For a hinge clamp, sketch an 85mm outer circle and an 8mm inner circle with 40mm between centers. Apply Tangent constraints, set the 10mm gap with the Dimension tool, and mirror across the X-axis for symmetry.

Press E for Extrude. Use Symmetric direction for C-clamps or One Side for hinge clamps. A 25mm body depth and 1mm for thin features are typical starting values. Use Cut mode to remove material for slots or clearance holes.

Press F for Fillet and round edges — 20mm on top outer edges and 15mm on front edges eliminates the sharp corners that create stress fractures in 3D-printed parts. Use Chamfer for bolt clearance if your design calls for it.

Use the Hole tool (H) to create a centered 15mm hole for the bolt. Then open the Thread tool, select the cylindrical face, choose a Metric profile (AMIS), and enable Modeled to make the thread ridges visible on screen and in renders.

Add motion with a joint: select Joint from the Create menu, choose Revolute, and pick the two components. This lets the top jaw rotate around a pin for a working digital model.

Clamp Type Key Geometry Best For
3D Printed Clamp 15mm threads, filleted edges, wide jaws Light-duty holding, custom shapes
Hinge Clamp 85mm/8mm circles, 10mm gap, revolute joint Swing-arm positioning, jigs
C-Clamp Cylinder extrusion, two-sided build, threaded hole Metalworking, strong grip
G-Clamp Parametric dimensions, editable via Change Parameters Repeat designs with variable sizes

What Are the Most Common Mistakes?

Four errors trip up Fusion beginners more often than any others:

  • Skipping the Component step. A body without a parent component can’t be moved, joined, or animated — you have to delete it and start over. Create a component before the first sketch.
  • Wrong units. Sketching in inches while the document is set to millimeters produces dimensions 25.4× off. Verify Units under Document Settings before you draw anything.
  • Sharp internal corners. Right angles at the inside of the jaws create stress points that crack under load in 3D printing. Always apply Fillet or Chamfer to internal corners.
  • Thread modeling with Modeled off. The Thread tool has a Modeled checkbox. If unchecked, the threads exist in the data but remain invisible on screen.

FAQs

Can I make a working threaded clamp in Fusion 360?

Yes. Use the Thread tool on a cylindrical face, select a Metric profile such as AMIS, and enable the Modeled option. The software generates realistic thread geometry that can be 3D printed or used in CNC toolpath planning without additional modeling.

What’s the difference between a C-clamp and a G-clamp in Fusion?

The modeling workflow is nearly identical. A G-clamp uses parametric dimensions editable through the Modify menu’s Change Parameters tool, making it easy to update sizes later. C-clamps typically use a simpler two-sided extrusion with a single threaded hole through the center.

Do I need a paid Fusion subscription to model clamps?

No. The Personal Use (Free) plan includes full modeling, 3D printing, and CAM capabilities. The free tier limits file storage and team collaboration, but every tool needed for clamp design — Extrude, Fillet, Thread, Hole, and Joint — is available without paying.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.