How to Choose a Mat for a 16×24 Frame | The Right Fit

Choosing the right mat for a 16×24 frame ensures your artwork fits correctly, is protected from acid damage, and looks professionally balanced in the frame.

The wrong mat leaves a gap, lets art sag, or ruins the piece over time. A 16×24 frame is a standard US size, meaning the outer dimension of the mat board must be exactly 16×24 inches to sit inside the frame’s rabbet. The real decisions come when you size the window opening, pick the border width, and select a mat that won’t chemically damage your work. Here is the exact fit for a 16×24 frame, plus the material choices that separate a frame job done right from one that looks homemade.

What Are the Exact Mat Dimensions for a 16×24 Frame?

That ¼-inch overlap on all sides holds the artwork edges securely behind the mat so no part of the art peeks out unattractively — a problem called “peaking” in framing. If the artwork is 12×18 inches, the 16×24 frame gives you roughly 4 inches of mat border width (2 inches per side), which is the standard recommended border for artwork up to 18×24 inches. For a more dramatic presentation, you can go up to 3–4 inches per side if the art is significantly smaller.

How Do You Choose the Right Mat Border and Color?

The border width affects visual balance just as much as the color. Standard practice sets top and side borders equal but makes the bottom border about 1 cm (0.4 inches) larger to create a bottom-weighted look — this centers the artwork slightly above the physical middle, which looks natural to the eye. For a 16×24 frame, a border of 2–3 inches works well for most art; the 2x rule (mat border at least double the frame width) applies to sturdy frames as a baseline.

Color matters more than most people think. A common mistake is matching the mat to the artwork’s most dominant color, which makes the mat disappear. Instead, choose a hue that pulls out the third or fourth most predominant color — a subtle accent that guides the eye. For black-and-white and color photos, a light, non-brilliant white remains the safest pick. For valuable art, buy a conservation-grade, 100% acid-free mat; standard cardboard mats leach acids that yellow and destroy art over time. Avoid the thinnest mat boards — a mat with slight depth creates a nicer separation between art and frame.

Cutting and Assembling the Mat Correctly

Start by measuring the frame’s rabbet with a rigid carpenter’s rule — cloth tapes stretch and cause buckling. Cut the window using a hobby knife or dedicated mat cutter, cutting edges on an inward angle for a cleaner look. When you hinge the mat to an acid-free backing board (use a strip of tape at the top), adjust the picture so it sits slightly above center rather than dead middle — dead center looks unbalanced to the eye. Apply transfer adhesive to the outer mat edges to fix it to the mounting board before placing the whole assembly in the frame. If you’re comparing ready-made options, our roundup of the best 16×24 frames with mats covers pre-sized combinations that skip the cutting step.

Common Mistakes to Avoid

Three errors show up most often in DIY framing. First, using a cloth tape measure — always use a rigid rule for accurate measurement. Second, centering the image exactly in the mat instead of shifting it slightly up so the bottom border is wider. Third, and most important for long-term preservation, using a non-acid-free mat. Ordinary cardboard or paper mats release acids that migrate into the artwork over time, causing yellowing and brittleness. For anything you want to keep, the 100% acid-free designation is non-negotiable. Change your blade frequently when cutting the mat window — a dull blade drags and breaks the bevel edge, ruining a clean corner.

FAQs

What if the mat border is too narrow for my art?

If the mat border is less than 1.5 inches on a 16×24 frame, the artwork likely needs to be smaller. A 12×18 inch piece gives you roughly 2 inches of border per side. If your art is larger, you may need a bigger frame or a float mount instead of a traditional mat.

Can I use a mat cutter on a standard hobby knife?

Yes, but a dedicated mat cutter with an adjustable bevel guide gives cleaner, more consistent angles. A standard hobby knife works if you use a straightedge with a non-slip backing and cut on an even surface. Change the blade after every two or three cuts to avoid tearing the mat surface.

How do I clean a mat board before framing?

Use a soft, dry microfiber cloth to remove dust from the mat surface. Never use water, cleaners, or compressed air near the mat window — moisture and chemicals can stain or warp the board. Wear cotton gloves when handling photographs to avoid transferring oil or fingerprints.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.