What Size Mat for a 24×48 Picture Frame | Cut & Measure Right

A 24×48 artwork needs a mat that is 30×54 inches if you use a 3-inch border, or 32×56 inches for a 4-inch border — and the window opening must be 23.5×47.5 inches to overlap the print by a quarter-inch on each side.

Finding a mat for a 24×48 frame isn’t a grab-and-go trip to the craft store. This is a non-standard large format, meaning standard consumer frames don’t exist for it — you’re buying or building a custom setup. But the math is straightforward once you know which numbers matter. The trick is understanding that the frame’s inner glazing size, not its outer dimensions, determines everything.

Why the Frame’s Inner Size Is What Matters

The mistake most people make is entering the frame’s outer dimensions into a mat calculator. That gives you useless numbers. The frame’s interior — the clear space behind the glass where the mat and artwork sit — must equal your mat’s outer dimensions. If you have a custom 24×48 frame, its inner glazing area is likely larger than 24×48 to accommodate the mat.

The Exact Mat Window Size for a 24×48 Print

Your artwork is 24 inches tall and 48 inches wide. The mat’s window (the opening the artwork shows through) must be ½ inch smaller in both directions — 23.5 × 47.5 inches — so the mat overlaps the print by ¼ inch on each side. Professional framers recommend a window overlap of ⅛ to ¼ inch per side. That overlap is what holds the print in place behind the mat without tape on the artwork’s face. Cut the window to the artwork’s exact size and the print can shift or fall through.

The step sequence is simple: measure the artwork’s visual area (not including any white borders you want hidden), subtract 0.5 inches from both width and height, and that’s your mat window cut size. Then decide on your border width, add double that to both artwork dimensions, and that’s your overall mat size. For a 24×48 print with a 3-inch border: 24 + 6 = 30 inches tall, 48 + 6 = 54 inches wide. For a 4-inch border: 24 + 8 = 32 by 48 + 8 = 56 inches.

Choosing Mat Border Width — 3 Inches vs. 4 Inches

Standard mat borders for large artwork run from 2 to 4 inches. For a 24×48, the visual weight of the piece calls for at least 3 inches. The mat border should also be at least 1.5 to 2 times the width of your frame molding — a thick farmhouse frame needs a wider mat so the molding doesn’t overwhelm the art. A 3-inch border works well with a slim metal or narrow wood frame; a 4-inch border suits wider moldings or when you want the mat to feel like a deliberate gallery element.

One professional trick: make the bottom border ¼ to ½ inch wider than the top and sides. Our eyes perceive a perfectly equal border as bottom-heavy, so adding that extra fraction on the bottom creates true visual balance. That means a 3-inch border on top and sides with a 3.25- or 3.5-inch border on the bottom. If you’re ordering pre-cut, specify this rather than accepting the default equal-borders cut.

If you’re ready to buy a complete custom solution, our curated list of top 24×48 picture frames covers models that fit these mat dimensions and accommodate the required glazing depth.

Cutting the Mat — Common Mistakes to Skip

Mat board typically runs 2 to 4 mm thick. Before you cut, confirm your frame’s rabbet depth (the groove the glass, mat, and backing sit in) is deep enough for the mat plus backing board plus glazing — a stack that can easily reach 6–10 mm.

Cut from the back of the mat board with the blade angled so the bevel slopes inward toward the artwork on the front side. Draw your cut lines on the back using the mat guide set to your border width. Cut from the bottom up to reduce tear-out. The most common error: entering the frame’s outer size into the calculator instead of the inner glazing size, which produces a mat that’s too large to fit. The second most common: cutting the window the same size as the artwork, giving the print no overlap to hold it.

FAQs

Can I buy a standard mat for a 24×48 frame?

No. 24×48 is a non-standard large format, so retail mats do not exist for it. You must order a custom-cut mat from a framing shop, custom frame supplier, or cut it yourself from a full sheet of mat board (typically 32×40 inches, meaning you’ll need to join or buy oversize board).

Should I use a mat at all for a large 24×48 print?

Yes, if the print will sit under glass. The mat keeps the glass off the artwork’s surface, preventing moisture trapping and ink transfer. For 24×48, a mat also creates breathing room around a long horizontal piece, preventing it from feeling cramped inside its frame.

What if my artwork already has a white border?

Measure only the image area you want visible, not the white paper border. The mat window should overlap the image edge by ¼ inch. If the existing white border is part of the design, include it in your measurement and decide whether you want the mat to cover it or not — then adjust the window size accordingly.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.