How to Set Up an 11×17 Laser Printer? | Tabloid Setup Guide

Setting up an 11×17 laser printer requires installing the full manufacturer driver, selecting Tabloid paper size, and loading paper into the rear bypass tray.

Most laser printers can’t handle 11×17 paper at all, so the process starts with confirming your model supports Tabloid or A3. The printer needs the right driver installed, paper loaded in the correct tray, and the size selected in the print dialog. For hardware recommendations, see our tested picks for 11×17 laser printers.

What Do You Need Before Printing On 11×17?

11×17 paper is called Tabloid in the US and A3 internationally. Only wide-format laser printers that explicitly support this size can handle it. Current models like the Xerox VersaLink C8000, Canon iR-ADV C5235, HP Color LaserJet Pro MFP 583f, and Brother HL-L6400DW with the optional A3 tray all support 11×17 output — but each requires the correct driver and tray setup.

The driver is just as important as the printer itself. Standard Windows or macOS basic drivers omit 11×17 entirely. You must install the full manufacturer driver — Xerox Device Center, Canon UFRII LT, or HP Full Feature Software — for Tabloid to appear. On macOS, open Page Setup and select your printer’s specific driver under Format For to reveal larger paper sizes.

Load 11×17 sheets into the rear feed or bypass tray, never the main tray, which typically accepts only letter and legal sizes. Sending a job to the wrong tray causes a paper jam or rejection. Use landscape orientation in document settings to match the physical paper orientation.

Setting Up 11×17 Printing By Brand

Setup steps vary by manufacturer but follow the same core sequence: install the full driver, configure device settings in Printer Properties, select Tabloid in the print dialog, and route paper to the bypass tray.

Xerox

Go to File > Print Setup, select your Xerox printer, and set Size to 11 x 17. Then go to File > Print > Properties > Paper > Other Size and choose 11 x 17 for both Output and Original Document Size. Load paper into the bypass tray and select that tray. Xerox’s KB0218236 confirms this workflow.

Canon

Install the Canon UFRII LT driver — the only driver that exposes A3 options. Open Printer Properties > Device Settings, set Device Type to Color [A3], uncheck Set User Id, click Get Device Status, then Apply. The General tab should show 11×17 in Page Size. Set custom margins to 0.83 cm for driver recognition and load paper in the bypass tray.

HP

Download and install the HP Full Feature Software from 123.hp.com — the basic driver does not include Tabloid. Restart your PC, open Printer Properties, and 11 x 17 (Tabloid) will appear in Page Size. Load paper into the rear feed tray and select it in the print dialog.

If 11×17 still doesn’t appear, create a custom paper size in Windows Forms (Control Panel > Devices and Printers > Print Server Properties > Forms) or in Mac Page Setup with exact dimensions 11.0 x 17.0 inches, then select it manually.

Troubleshooting Common 11×17 Setup Mistakes

When 11×17 printing fails, the cause is almost always one of five issues.

Mistake Result Fix
Using a basic Windows or Mac driver Tabloid size missing Install the full manufacturer driver
Loading paper in the main tray Printer rejects the job Use rear feed or bypass tray
Device type not set to A3 (Canon) 11×17 not in dropdown Set Device Type to Color [A3] in Properties
Incorrect margin settings Size not recognized Set margins to 0.83 cm (Canon) or 0.25 in (others)
Scaling set to Shrink to Fit Document prints cut off Select Fit to Paper Size or 100% scaling

If all five are checked and 11×17 still won’t print, verify network settings on the printer itself — some copier models hide large-format options until the device fetches configuration from the network. A reboot of both printer and computer often resolves remaining cases.

FAQs

Can any laser printer handle 11×17 paper?

No, only printers that explicitly support A3 or Tabloid can print 11×17 sheets. Standard office printers limited to 8.5×11 letter size will reject it. Check the spec sheet for A3 or Tabloid support before attempting setup.

Why doesn’t 11×17 appear in my printer’s size options?

A basic driver omitting large formats is the most common cause. Install the full manufacturer driver from the support site. On macOS, use the printer-specific driver in Page Setup under Format For.

Which paper tray should I use for 11×17 sheets?

Always use the rear feed or bypass tray. The main tray on most models only accepts letter and legal sizes. Some printers like the Brother HL-L6400DW offer an optional A3 tray, but the bypass tray is the reliable default.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.