7 Best 12/2 With Ground | Run 20A Without Running to the Store

Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

You need a 12/2 with ground wire to power a new outlet, a ceiling light, or a shed without tripping a breaker or fighting stiff cable in a tight attic. This yellow-jacketed NM-B cable is the standard for any 20-amp residential branch circuit (a circuit that powers lights and outlets in your home). Lengths range from a short 25-foot coil to a 250-foot spool, and you can choose indoor-only NM-B or direct-burial UF-B for underground runs. Your choice depends on matching the wire to your exact project scope.

I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

The right 12/2 with ground wire arrives at your door at a fair price, whether you are wiring a single switch or pulling cable through an entire basement.

Our Picks at a Glance

25 FT 12/2 Type NM-B Copper Cable, #12 AWG
Best Overall25 FT 12/2 Type NM-B Copper Cable, #12 AWG4.9★440 ratingsThe small-spool champ that skips the big-box cage wait. This is the wire that buyers keep coming back to for finishing a single room or adding one outlet — and at a 4.9-star average, it is the highest-rated NM-B cable on the list.Check Price on Amazon
Energeaster Solid Indoor 12/2 W/G NMB Cable, 25ft Coil
Best ValueEnergeaster Solid Indoor 12/2 W/G NMB Cable, 25ft Coil4.7★618 ratingsA coil with a noticeably tougher jacket that still pulls smoothly.Check Price on Amazon

How To Choose The Best 12/2 With Ground

Every 12/2 with ground cable serves the same basic purpose — supplying power to a 20-amp circuit — but your specific project decides what kind you need. The three biggest factors are cable type (NM-B for indoors, UF-B for underground), the length that matches your run, and whether the copper is solid for easy stripping or stranded for flexibility in tight spots.

Indoor vs. Outdoor: NM-B vs. UF-B

The most critical split in this category is between NM-B (non-metallic building) cable and UF-B (underground feeder) cable. NM-B has a yellow PVC jacket and is designed exclusively for dry indoor locations — inside walls, attics, and ceiling cavities. UF-B has a tougher gray jacket that resists sunlight and moisture, allowing direct burial in the ground without a conduit. Using the wrong type is a code violation and a safety risk.

Length and Cost Per Foot

Wire is sold in fixed spool lengths — 25 ft, 50 ft, 100 ft, 150 ft, and 250 ft are the most common. The per-foot cost drops significantly on larger spools, but buying a 250-ft roll for a single outlet is wasteful. Measure your run from the breaker panel to the farthest device, add 10-15% for route bends and service loops, and pick the spool that just covers it.

Solid Copper vs. Stranded Conductors

Most residential 12/2 NM-B uses solid copper conductors, which are easier to strip and hold tight under screw terminals. Stranded wire is more flexible and appears mostly in UF-B cable for outdoor runs where the wire snakes around obstacles. For standard indoor work, solid copper is the right choice — it meets code, strips cleanly, and holds its shape in the box.

Quick Comparison

Model Best For Length Wire Type Voltage Amazon
25 FT 12/2 Type NM-B★ Best Overall Small indoor jobs 25 ft NM-B 600 V Amazon
Energeaster 12/2 NM-B 25ftBest Value Budget-friendly coil 25 ft NM-B 600 V Amazon
50 FT 12/2 Type NM-B Mid-range indoor runs 50 ft NM-B 600 V Amazon
Type NM-B 100 FT 12/2 Whole-room rewiring 100 ft NM-B 600 V Amazon
PLESIU 12/2 UF-B 150ft Direct burial outdoor 150 ft UF-B 600 V Amazon
FIRMERST 12/2 UF 150ft Tough outdoor cable 150 ft UF-B 600 V Amazon
Colonial Wire 250-Ft NM-B Large whole-house spool 250 ft NM-B 600 V Amazon

In‑Depth Reviews

★ Best Overall

1. 25 FT 12/2 Type NM-B Copper Cable, #12 AWG

Our pick — over 4.5★ from 400+ verified ratings; the strongest balance of quality and price.

Solid Copper600 V

The small-spool champ that skips the big-box cage wait.

This is the wire that buyers keep coming back to for finishing a single room or adding one outlet — and at a 4.9-star average, it is the highest-rated NM-B cable on the list. The 25-foot length covers most small indoor jobs without leaving you with a half-spool of wire you will never use. Owners consistently call out the solid copper core that strips clean and the jacket that pulls easily through ceiling joists (the horizontal beams that support your ceiling). Many note it matches the quality of what they used to buy at Lowe’s.

The real appeal here is convenience plus price. Buyers report that a 25′ 12/2 NM-B run “quality matches Lowe’s; solid jacket, clean copper, easy to pull through ceiling” — and they appreciate it arriving at the door instead of waiting for an employee to open up the cage.

A few note that if your run is longer than 20 feet or so, you will have to buy two spools, which raises the cost. For one switch, one outlet, or one light circuit, this is the easiest buy in the category.

Why owners pick it

  • Solid copper core that strips clean every time
  • Same quality as big-box cable without the in-store hassle
  • Perfect 25-ft length for small jobs — no leftover waste

Who needs more length

  • If your run exceeds 20 ft, you need two spools or a larger roll

Reach for this if: you have a single new outlet, switch, or light fixture to wire indoors and want the best-rated, most convenient option at a modest price.

Look elsewhere if: your project runs across an entire basement or multiple rooms — the 50-ft or 100-ft spools will give you a better per-foot rate.

Best Value

2. Energeaster Solid Indoor 12/2 W/G NMB Cable, 25ft Coil

20 Amp600 V

A coil with a noticeably tougher jacket that still pulls smoothly.

The Energeaster 12/2 NM-B coil earns a strong 4.7-star average across hundreds of owners, and the sentiment is consistent: the outer jacket feels more sturdy and cut-resistant than the standard big-box wire. One electrical engineer gave it a 9/10 rating, praising the solid copper, true gauge (actual 12 AWG thickness), and NEC (National Electrical Code) compliance. The cable is rated for 600 volts and 90°C heat capacity, with the ampacity restricted to 60°C per code — the standard spec for residential indoor use.

However, the very toughness that owners praise has a trade-off. The wire is stiffer than some competitors, and a few owners mention it is harder to pull through long conduit runs or tight bends. That stiffness is actually a plus for short attic or wall runs where you want the wire to hold its shape. The quality construction and value-for-money are the most-mentioned positives by a wide margin, making this an excellent budget-conscious pick for a quick indoor circuit.

Unlike the 25-ft NM-B pick above, this one comes coiled rather than on a spool, which some find easier to handle for small projects.

Build quality stands out

  • Jacket is more sturdy and cut-resistant than typical NM-B
  • Solid copper, true 12-gauge, UL/NEC compliant
  • Great value for a short indoor run

The stiffness catch

  • Stiffer than some brands — harder to pull through long, snaking conduit
  • Indoor use only; not rated for wet or direct-burial locations

Smartest buy for: a DIYer who wants a slightly tougher jacket for attic or wall runs without paying a premium.

Hold off if: you need maximum flexibility for pulling around corners — a stranded UF-B cable or a more flexible NM-B brand will be less frustrating.

Top Performer

3. 50 FT 12/2 Type NM-B Copper Wire, #12 AWG

50 ft600 V

The middle-ground spool that cuts per-foot cost without bulk waste.

A 4.8-star average and 355 ratings put this 50-foot spool squarely in the balance for homeowners wiring a room addition or a home shop. Owners praise the solid 12/2 copper for cutting and bending smoothly without kinking, and the yellow jacket is the same NM-B construction used by professional electricians. One buyer running a 20-amp setup for their shop outlets confirmed “the wire is the correct size I order for my 20 amp set up”.

At 50 feet, this spool handles a typical run from a basement panel to a new bedroom or a garage workshop without forcing you to buy a 100-ft roll you will never finish. The cable is rated for 600 volts and up to 90°C dry environments, and it complies with ASTM (American Society for Testing and Materials) standards, federal specs, and the National Electrical Code. The extra length over the 25-ft coils means you can run a complete circuit without a splice in the middle.

The biggest upside mentioned is value — the per-foot cost is significantly lower than a 25-ft spool, yet you are not stuck with 50 feet of leftover wire after a single-room project.

Best mid-size pick

  • Solid copper that cuts easily and holds shape
  • Long enough for a full room circuit without splicing

Not for small jobs

  • Overkill for wiring a single outlet or light switch
  • 50 ft is still too short for whole-basement wiring — consider the 100-ft spool

Ideal for: a medium-length run — a new room, a garage, or a workshop where 25 ft is too short and 100 ft is too much.

Think twice if: your panel and farthest outlet are closer than 15 feet apart; grab the 25-ft spool and save a few dollars.

Best for Whole Rooms

4. Type NM-B 100 FT 12/2 Copper Cable, #12 AWG

100 ft20 Amp

A full 100-foot spool at a price that undercuts the home-center shelf.

When your project spans multiple rooms or a finished basement, 100 feet is the logical starting point. This Arizona Electrical Solutions spool carries a 4.8-star average and consistently earns praise for value — owners say it is “slightly cheaper than our local home improvement store” for the same 12/2 NM-B cable. The cable meets ASTM B-3 and B-8 (standards for copper wire), federal specification A-A-59544, and the National Electrical Code NFPA 70, so it is fully code-compliant for residential indoor use.

Owners have used it for pancake lights in ceilings and general whole-room rewiring, and the build quality is solid across the board. The yellow jacket makes it easy to identify among other cables in the wall, and the 100-foot length gives you enough slack to run from a panel to the farthest corner of a typical home with room to spare.

The one honest caveat: 100 feet on a single spool weighs more and is less convenient for one-handed pulling compared to smaller rolls. For a full rewiring project, that is a non-issue; for a single circuit, it is overkill.

The efficiency edge

  • Full 100 ft for less than the big-box store charges
  • Yellow jacket visible against dark framing
  • Code-compliant for 20-amp residential circuits

The bulk reality

  • A 100-ft spool is heavy for one-handed pulling in tight attics
  • Overkill if your total run is under 40 ft

Grab this for: finishing a basement, adding a home office, or any project where the wire needs to reach from the panel across several rooms.

Skip it for: a single ceiling light or one outlet — the 25-ft spool is cheaper and easier to handle.

Top Outdoor Pick

5. PLESIU 12/2 UF-B Wire, Underground Feeder, 150ft Cut

Direct Burial150 ft

The UF-B cable that goes straight into the ground without a conduit.

Moving from indoor NM-B to outdoor work, the PLESIU 12/2 UF-B is the direct-burial specialist. With a tough gray jacket made of PVC and nylon that resists sunlight, moisture, and physical abrasion, this 150-foot cable is rated for direct earth burial without any conduit. It carries a 4.8-star average and owners consistently say the price beats the big-box stores by a meaningful margin.

The cable uses #12 AWG annealed (soft) copper conductors and is rated for 600 volts with a heat capacity of 90°C, carrying an allowable ampacity of 20 amps — the exact specs you need for feeding a shed, post lamp, or outdoor outlet. Customers note it works great for underground runs and would reorder without hesitation. One owner summed it up as “quality wire at a much better price than big box stores.”

Keep in mind that UF-B is noticeably stiffer than NM-B because of its solid moisture-blocking jacket. Pulling it through conduit is possible but takes more effort than standard NM-B. For direct trench burial, that stiffness is actually a benefit — the cable holds its position against shifting soil.

Burial-ready build

  • Direct earth burial rated — no conduit needed
  • Sunlight- and moisture-resistant gray jacket
  • 150 ft covers long outdoor runs from house to shed or fence

Not for indoor work

  • Stiffer than NM-B — pull harder in conduit or tight spaces
  • Gray color is less visible in trenches than NM-B yellow

Perfect for: running power to a detached garage, shed, or outdoor workshop with a single direct-burial trench.

Not for: interior walls or attics — stick with NM-B yellow jacket for indoor runs.

Premium Underground

6. FIRMERST 12/2 UF Wire Outdoor Direct Burial Underground Feeder Cable, 150ft

ETL Listed150 ft

An ETL-listed UF-B with a tough outer shell that shrugs off underground abrasion.

The FIRMERST 12/2 UF-B cable takes the direct-burial concept seriously with an outer jacket that owners describe as “really tough” — so tough that stripping it takes a bit of effort, but the trade-off is confidence that the wire will survive years underground without conduit. It carries a 4.8-star average and owners highlight the quality as the top reason to buy. The cable is ETL-listed (a safety certification similar to UL), rated for 600 volts, and has an outer diameter of 5.6 x 11.8 mm.

At 150 feet, this spool is perfect for long underground runs like feeding a shed, installing well pump wiring, or running landscape lighting to a distant part of the yard. Owners have used it to install outlets for yard fountains and report no issues, with one noting it pulled through conduit “fairly easy” despite the stiff jacket. The PVC jacket resists corrosion and UV exposure, so the cable is safe both buried and in above-ground outdoor runs.

The recurring observation is that the tough outer cover makes stripping the ends more work than standard NM-B. A sharp cable stripper or utility knife is essential. For anyone who prioritizes long-term underground durability over quick stripping, this is a trade-off worth making.

Built for the long haul

  • Tough outer jacket resists corrosion, UV, and underground abrasion
  • ETL-listed for direct burial — no conduit required
  • 150 ft handles long yard and shed runs

Stripping requires muscle

  • Jacket is very tough — stripping takes more effort than NM-B
  • Not ideal for indoor use; better suited to outdoor-only projects

Choose this when: the wire will be buried directly in the ground and you want the maximum protection against moisture and rocks.

Pass on this if: your project is entirely indoors — NM-B is cheaper and easier to work with for walls and attics.

Big Spool Value

7. Colonial Wire 250-Ft Roll 12-2 AWG NM-B Gauge Indoor Electrical Copper Wire

250 ft21.8 lb

The warehouse spool that saves serious cash when you need 250 ft of NM-B.

For a whole-house rough-in or a garage wired from scratch, the Colonial Wire 250-foot roll delivers the lowest per-foot cost in this lineup. It carries a 4.7-star average across 550 ratings, and the recurring theme is “big savings over Home Depot or Lowe’s.” Buyers who found this spool in the Amazon warehouse reported “significant savings” compared to the same 12-2 house wiring at local stores. The white jacket is a distinctive alternative to the more common yellow NM-B color.

Owners note the wire has a flatter profile than some other brands, which makes it easier to route in tight spaces between studs (the vertical wooden beams in walls). One contractor reported no issues using it, and DIYers have used it for everything from connecting a building to a meter to wiring a new garage. The wire is 600-volt rated and weighs 21.8 pounds on the spool — a substantial roll that reflects the 250 feet of solid copper inside.

A small number of owners observed the outside insulation sheathing feels slightly thinner compared to other brands, though the actual wire gauge is confirmed to be on spec. At this spool size, the per-foot savings are substantial enough that many consider it worth the slight difference in jacket thickness.

Unbeatable per-foot price

  • Biggest spool in the lineup at 250 ft — lowest per-foot cost
  • Flatter profile than some brands for easier routing in tight spaces
  • Solid copper, correct gauge, meets code

The jacket question

  • Some find the outer insulation thinner than competitors
  • White jacket may be less visible against white framing and ceilings

Go with this if: you are wiring an entire house, large garage, or multi-room addition and want the absolute best per-foot value on NM-B.

Hold off if: you need less than 100 ft — the 100-ft spool above is more manageable for smaller projects.

Understanding the Specs

12/2 with Ground — What the Numbers Mean

The “12” refers to the wire gauge — 12 AWG (American Wire Gauge, a standard for wire thickness), which is the standard thickness for a 20-amp residential circuit. The “2” means two insulated conductors (typically black for hot and white for neutral). “With ground” means a third, bare or green-insulated copper wire is included for the grounding circuit. Together, this cable delivers 120 volts at up to 20 amps for outlets, lights, and switches.

NM-B vs. UF-B — Indoor vs. Outdoor

NM-B (Non-Metallic, Building) is the yellow-jacketed cable for dry indoor locations — inside walls, attics, and ceiling cavities. It is rated for up to 90°C in dry environments but must be kept away from damp areas. UF-B (Underground Feeder) has a gray, solid PVC jacket that can withstand direct sunlight and moisture, allowing it to be buried directly in the ground without a conduit. Using NM-B outdoors or UF-B indoors is not a code violation in most cases, but UF-B is significantly stiffer and harder to work with inside walls.

Voltage and Temperature Ratings

Almost all 12/2 cable in this category is rated for 600 volts — well above the 120/240 volts found in a typical home. The temperature rating (90°C for NM-B, also 90°C for UF-B) refers to the maximum temperature the insulation can handle at its full ampacity. However, the National Electrical Code restricts the allowable ampacity of NM-B to the 60°C column, which is why 12 AWG NM-B is limited to a 20-amp breaker despite the higher-temperature insulation.

Solid vs. Stranded Conductors

Most NM-B cable uses solid copper conductors — a single thick wire per conductor. Solid wire is easy to strip, holds its shape under a screw terminal, and is less likely to nick during installation. UF-B cable may use either solid or stranded conductors. Stranded wire is more flexible and bends around obstacles more easily, making it preferable for outdoor runs that snake through tight spaces. For indoor wall work, solid copper remains the standard because it is easier to terminate at outlets and switches.

FAQ

Can I use 12/2 NM-B wire outdoors in conduit?
NM-B is not rated for wet or damp locations, even inside conduit. If the conduit is outdoors or in a damp area like a crawl space, you need UF-B cable or individual THHN/THWN conductors (a type of building wire rated for wet locations). For dry indoor conduit runs, NM-B is acceptable.
What is the difference between 12/2 and 14/2 wire?
The number is the wire gauge. 12 AWG is thicker and rated for a 20-amp breaker; 14 AWG is thinner and rated for a 15-amp breaker. A 20-amp circuit requires 12-gauge wire — using 14/2 on a 20-amp breaker is a fire hazard and a code violation.
Do I need conduit for 12/2 NM-B in an attic?
No. NM-B is designed for exposed and concealed installations in dry locations, including attics. As long as the attic is dry and the cable is not subject to physical damage, you can staple it directly to the joists (the horizontal beams that support the floor or ceiling). If the wiring runs across the top of the joists below an occupied attic, it may need to be protected where it is accessible.
Can I bury 12/2 NM-B directly in the ground?
No. NM-B is not rated for wet locations or direct burial. For underground runs, you must use UF-B cable (underground feeder) rated for direct burial at 24 inches deep, or run individual THWN conductors inside conduit.
How long does 12/2 UF-B last when buried directly?
UF-B cable with a PVC jacket is designed for long-term outdoor use. The tough outer shell resists moisture, sunlight, and soil chemicals. There is no fixed expiration, but most installations last decades as long as the cable is not physically damaged during installation.
What amp breaker can I use with 12/2 NM-B?
A 20-amp breaker is the maximum allowed for 12 AWG copper NM-B on a general-purpose circuit. The wire is rated for 20 amps at 60°C (the restricted ampacity per code), so a 15-amp breaker is also acceptable but limits the circuit to 15 amps.
Can 12/2 wire be used for 240-volt appliances?
Yes, 12/2 NM-B can supply 240 volts when used as a single-phase circuit. Both conductors become hot legs with 120 volts each to ground, and the bare ground is the equipment ground. A double-pole 20-amp breaker is required. This is common for baseboard heaters, well pumps, and small air conditioners.
Is it okay to use 12/2 NM-B for outlets on a 15-amp circuit?
Yes. Using heavier wire (12 AWG) on a 15-amp circuit is perfectly safe and code-compliant. It simply costs more than 14/2 would. The breaker rating determines the circuit’s capacity, and the wire must be at least as thick as the breaker requires — thicker is fine.
How do I strip UF-B cable without damaging the conductors?
Use a sharp utility knife or a dedicated cable stripper with a UF-B setting. Score the jacket lengthwise first, then peel it away. Because the jacket is bonded to the conductors, go slowly to avoid nicking the copper. Many electricians prefer a cable ripper tool for UF-B.
What does the color of the jacket mean for 12/2 wire?
The standard colors are: yellow for 12 AWG NM-B, white for 14 AWG NM-B, orange for 10 AWG NM-B, and gray for UF-B cable regardless of gauge. The color is a quick visual identifier of the wire size and type — never cut or strip a cable based on color alone, as different brands may vary.

Final Thoughts: The Verdict

For most buyers, the 12/2 with ground winner is the 25 FT 12/2 Type NM-B Copper Cable because it delivers the best combination of convenience, price, and build quality for the typical single-room project. If you are wiring a whole basement or addition, grab the 100 FT NM-B spool for the best per-foot rate. And for outdoor runs to a shed or garage, the PLESIU 150-ft UF-B is the reliable direct-burial choice that saves a trip to the hardware store.

How We Picked

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources & Methodology

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.

Related Guides

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.