What Is 12/2 Wire? | Residential Wiring Explained

12/2 wire is a 12 AWG cable with two insulated conductors plus a bare ground, designed for 20-amp residential branch circuits in dry indoor locations.

If you are wiring a new kitchen circuit, adding a garage outlet, or replacing old cable and you keep seeing “12/2” on the spool, the designation tells you three things at once: the conductor thickness (12 AWG), the number of insulated current-carrying wires (2), and the fact that a bare ground wire is typically included. In U.S. residential wiring, the common product is “12/2 NM-B with ground” — a yellow-jacketed, nonmetallic-sheathed cable that handles up to 20 amps per code. Understanding exactly what this cable contains and where it belongs keeps your circuit safe and inspection-ready.

What The Numbers And Slash Mean

The “12” refers to 12 AWG — American Wire Gauge — where a smaller number means thicker wire. 12 AWG is copper wire with a diameter of about 0.081 inch, and it carries up to 20 amps in standard branch-circuit use. The “/2” indicates two insulated conductors inside the sheath: typically a black hot wire and a white neutral wire. The bare copper ground wire is not counted in the “/2” because it is uninsulated and does not carry normal load current.

In the standard U.S. product, 12/2 NM-B cable also includes that ground wire, so the full retail description is often “12/2 W/G” (with ground) and the jacket is yellow. This cable is rated 600 volts and 90°C dry for the conductors, but the National Electrical Code limits the ampacity to 60°C for most standard terminations — which still works out to 20 amps for 12 AWG copper. Do not confuse this with 12/3 cable, which contains three insulated conductors (plus ground) for applications like three-way switches or split receptacles.

Where 12/2 Wire Is Used

Cerrowire’s application chart lists 12/2 NM-B for residential branch circuits serving workshop power tools, wall light switches, combination switch and receptacle units, disposals, exhaust fans, grounded receptacles, lighting fixtures with outlets, dishwashers, room air conditioners, electric wall heaters up to 20 amps, and food freezers on separate circuits. In practice, 12/2 is the standard choice for 20-amp circuits in kitchens, bathrooms, garages, laundry rooms, and any area that may power higher-demand equipment.

The cable is limited to dry indoor installations. The product specified by the National Electrical Code and manufacturer listings cannot be used in wet or damp locations or exposed to moisture. One source notes it may be fished through masonry or tile walls if not exposed to dampness, but it is not rated for outdoor exposure. If your project involves outdoors, conduit or a wet-rated cable type is required.

While 12/2 can handle most general-purpose loads, it is not the cable for 15-amp circuits — that is 14/2, which uses 14 AWG conductors and a 15-amp breaker. Matching conductor size to breaker is critical: 12 AWG goes with a 20-amp breaker, 14 AWG with 15 amps.

Installation Tips And Common Mistakes

When running 12/2 NM-B, standard support rules apply: secure the cable at intervals not exceeding 4½ feet, support within 12 inches of each box, and keep unsupported length between the box and the first support within 18 inches. These rules prevent the cable from sagging or being damaged during drywall work.

A common mistake is assuming the cable rating alone sets the circuit’s ampacity. Always pair 12 AWG with a 20-amp breaker and verify that the devices you connect — switches, receptacles, fixtures — are rated for 20 amps or are on a circuit where the breaker protects them.

If you are ready to buy cable for your project, we tested the top options available: see our rated guide to the best 12/2 with ground cable for current picks and lengths.

Specification 12/2 NM-B Value Why It Matters
Conductor size 12 AWG copper Thicker wire = lower resistance, supports 20 amps
Insulated conductors 2 (black hot, white neutral) The “/2” count; bare ground not included
Ground conductor 1 bare copper Equipment grounding, not a current-carrying conductor
Voltage rating 600 volts Exceeds residential needs (120/240V)
Temperature rating 90°C dry (ampacity limited to 60°C) Standard termination limits apply for code compliance
Allowable ampacity 20 amps Matched to 20-amp breaker per NEC
Jacket color (NM-B) Yellow Industry standard for 12-gauge NM cable

FAQs

Can I use 12/2 wire for a 15-amp circuit?

Yes, 12/2 wire can be used on a 15-amp circuit, but that is not its intended purpose. 12 AWG is heavier and more expensive than the 14 AWG that matches a 15-amp breaker. It is safe and code-compliant, but overkill for low-draw circuits like a bedroom lighting loop.

Does 12/2 wire include a ground wire?

In standard U.S. NM-B cable, yes — 12/2 typically includes a bare copper ground conductor even though the “/2” only counts the two insulated wires. Always confirm the product label says “with ground” or “W/G” if you need that third conductor for code compliance.

Is 12/2 wire rated for outdoor use?

Standard 12/2 NM-B is rated for dry locations only and is not approved for wet, damp, or direct outdoor exposure. For outdoor circuits, use UF-B cable (underground feeder) or run individual THHN conductors inside conduit rated for wet locations.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.