How Many Gallons Does a Tote Hold? | Standard IBC Sizes

The most common industrial tote, an IBC tote, holds 275 gallons as the standard U.S. size, with 330 gallons being the other widespread option; commercial capacities range from roughly 110 to 550 gallons.

If you’re shopping or handling bulk liquids, “tote” almost always means an intermediate bulk container (IBC), and the gallon capacity question is straightforward: the standard answer is 275 gallons, though 330-gallon totes are equally common on the same footprint. The real answer depends on whether you’re filling one for stationary storage or shipping it, and which model fits your volume. Here is what the numbers actually mean.

The Two Standard IBC Tote Sizes

The 275-gallon IBC tote is the default U.S. standard and the most commonly sold model. Its partner is the 330-gallon tote, which shares the same 48 × 40 inch pallet footprint but stands a bit taller — about 46 inches for the 275 and about 53 inches for the 330. Both fit standard pallet racks and shipping slots, which is why they dominate the market.

Full Capacity Range You’ll Actually See

Beyond these two, manufacturers publish IBC capacities anywhere from about 110 gallons up to 550 gallons for poly composite and stainless steel models. Some stainless steel units reach toward 793 gallons. Most commercial operations stick between 180 and 550 gallons because that range balances volume with forklift and truck compatibility. A 275-gallon tote holds roughly 1,041 liters and is equivalent to about five 55-gallon drums; the 330-gallon tote holds about 1,249 liters, or six drums.

The One Critical Filling Rule

If you’re shipping a loaded tote, leave headspace — don’t fill to the nominal maximum. One practical guide recommends 260 to 270 gallons in a 275-gallon tote for transport to allow for liquid movement and pressure changes. For stationary storage, filling the tote fully is fine. The tote’s empty weight ranges from about 118 to 160 pounds for a 275-gallon composite model. Filled with water, that same tote weighs roughly 2,300 to 2,500 pounds; a filled 330-gallon tote runs about 2,900 to 3,100 pounds.

Choosing the Right Tote for Your Job

For light-duty storage and transport of dry goods or non-hazardous liquids, a poly composite IBC works well and is the most affordable. If you need chemical resistance, high heat tolerance, or plan to reuse the tote repeatedly, a stainless steel model carries a higher upfront cost but lasts longer. Plan at least 13 to 14 square feet per tote in storage, plus clearance for access with a pallet jack or forklift. If a smaller, everyday storage container is what you really need rather than an industrial IBC, our testing roundup of the best 20-gallon storage totes covers the household-sized options that fit closets and garages.

FAQs

Is there a difference between a plastic storage bin and an IBC tote?

Yes. Plastic storage bins typically hold 3 to 75 gallons and are meant for household organizing or light garage use. An IBC tote is an industrial intermediate bulk container rated for storing and transporting heavy liquids in commercial quantities, usually starting at 110 gallons.

Can I fill a 275-gallon tote all the way for shipping?

Most sources advise against it. For transport, fill to about 260–270 gallons to leave headspace that accommodates liquid movement during transit. For stationary storage, filling to the nominal 275-gallon capacity is fine.

Do all 275-gallon totes have the same dimensions?

No. While the standard footprint is 48 inches by 40 inches, heights vary between manufacturers and models. Empty weight also differs based on pallet design, cage height, and material, ranging from about 118 to 160 pounds for a typical 275-gallon composite tote.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.