What Is a Ratchet Spanner? | Faster Work on Tight Fasteners

A ratchet spanner is a wrench with a built-in ratcheting mechanism that lets you turn a fastener in one direction while freely moving back in the opposite direction without removing the tool.

If you have ever been stuck trying to turn a bolt in a spot where you could only move the wrench a few degrees before your knuckles hit something, a ratchet spanner is the tool you needed. Instead of lifting the spanner off, repositioning it, and starting a fresh hold on every turn, you simply rock the handle back and forth. The internal mechanism grabs on the drive stroke and free-spins on the return stroke, making the job faster and keeping the tool seated squarely on the fastener, reducing the chance of rounding the head.

How Does a Ratchet Spanner Work?

A ratchet spanner works through a small toothed gear ring and a spring-loaded pawl inside the head. When you turn the handle in the drive direction — usually clockwise for tightening and counterclockwise for loosening — the pawl engages the gear teeth, gripping and turning the fastener. When you move the handle back, the pawl slides over the gear teeth without engaging them, so the head spins freely while the fastener stays put. That one-way action is the ratchet effect. Reversing the direction is handled via a reversing lever near the head that flips the pawl or a flip-over head design where you flip the wrench over. Some basic models are one-direction-only and require flipping physical orientation. The tooth count determines how many degrees of movement are needed before the pawl catches; a 72-tooth mechanism, common in current spanners, provides a 5-degree increment between clicks, letting you work in very tight spaces.

What’s the Difference Between a Ratchet Spanner and a Socket Wrench?

Both contain a ratcheting mechanism, but they are built for different jobs. A socket wrench uses a square drive post that accepts interchangeable sockets of various sizes. A ratchet spanner has a fixed-size opening — either a closed ring on a double-ended wrench or a combination of a ring end and an open end. Socket wrenches offer more versatility with a single handle and a set of sockets, but ratchet spanners are thinner and can reach into tighter sideways spaces where a bulkier ratchet head and socket combination will not fit. For automotive, mechanical, and general maintenance work where access is limited, many pros reach for a ratchet spanner first and use the socket ratchet where clearance is less of an issue.

Common Sizes, Teeth, and Build

Current ratchet spanner documentation shows a consistent range of standard metric sizes, most often between 8 mm and 20 mm, with common sets covering 10, 11, 12, 13, 14, 15, 16, 17, 18, and 19 mm. The most frequently cited tooth count is 72 teeth, giving a 5-degree swing arc. Materials are typically chrome vanadium steel or alloy steel, often with a chrome or satin finish. The head offset angle — usually 13° or 15° — helps clear nearby obstructions. Overall lengths vary by size: a 12 mm spanner might be around 148 mm, while a 20 mm wrench can reach 260 mm. This fixed metal design means you must match the spanner size exactly to the fastener to avoid rounding off heads.

Using a Ratchet Spanner: Tips and Common Mistakes

To use one effectively, seat the head fully on the fastener before applying force. The ratcheting mechanism works best when the wrench is square on the nut. Apply a steady, controlled torque rather than sharp impact-style force to reduce wear. To reverse direction, either flip the wrench (if a non-reversible flip-over model) or use the reversing lever (if it has one). Common misunderstandings: do not confuse a ratchet spanner with a socket wrench; do not assume every model has a reversing lever; and tooth count varies — while 72 teeth is the most common standard, older or budget spanners may require a wider swing arc.

FAQs

Is a ratchet spanner the same as a socket wrench?

No. A socket wrench uses a square drive to hold interchangeable sockets. A ratchet spanner has a fixed-size ring or combination head. They are complementary tools.

What does 72 teeth mean on a ratchet spanner?

It means the internal gear ring has 72 contact points, allowing the pawl to engage every 5 degrees of handle movement, useful in very limited spaces.

Can you use a ratchet spanner for loosening and tightening?

Yes. You set the direction by flipping the wrench over or moving a reversing lever on the head.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.