Eight accessories — flush cutters, calipers, a scraper, IPA, spare nozzles, filament drying gear, and an adhesion aid — complete any FDM setup.
That new printer prints fine out of the box, but the difference between hobby and frustration comes down to what you add to it. The must have 3D printer accessories list is shorter than most shop guides suggest — you can skip the big tool kits and focus on the eight items that solve real, recurring problems. Most cost under $40, and each one prevents a specific failure or saves measurable time.
What You Actually Need
The essentials break into three jobs: finishing prints, keeping the build plate working, and taming moisture. Here’s the short list, with what each item does.
- Flush cutters — trim filament ends and snip support material. A $10 pair outlasts the ones bundled with most printers.
- Digital calipers — measure printed parts against your CAD dimensions. Indispensable if you design your own models.
- Deburring tool — shave off brim edges, elephant’s foot, and rough first-layer overhang.
- Bed scraper — pop prints off the build plate once it cools, without gouging the surface.
- Isopropyl alcohol + microfiber cloth — degrease the build plate between prints to keep first layers sticking.
- Spare nozzle or hotend — worn or clogged nozzles kill print quality; swap one in instead of stopping the day.
- Filament dryer or dry storage — moisture ruins prints, especially with certain materials.
- Adhesion aid — glue stick or specialty adhesive rescues tricky first layers.
Raise3D’s Academy lists these same categories, and their example accessory names — the PrintDry Filament Pro, Polybox dry storage, hardened nozzles, and Magigoo adhesives — are the kind of gear you’ll see in serious shops.
Why Moisture And Nozzles Matter Most
Skipping filament drying is the most common cause of stringing, popping, and failed prints. Raise3D explicitly states that filaments like PVA and Nylon need to be dried to print properly and produce higher-quality parts — dry storage or an active dryer should be part of the workflow for any moisture-sensitive spool.
Nozzles wear, and abrasive filaments accelerate it. Carbon-fiber, glow-in-the-dark, and wood-filled materials grind a standard brass nozzle down over a few spools. If you print abrasives regularly, this isn’t optional.
The Price Reality Check
These accessories are cheap relative to the printer itself. Here’s what current prices look like:
| Accessory | Typical Price | Why It Earns Its Place |
|---|---|---|
| Flush cutters + deburring tool | $10–20 | Finishing and support removal |
| Digital calipers | $15–30 | Dimension validation for your own designs |
| Hardened steel nozzle / hotend | $13–36 | Survives abrasive filaments |
| Second textured PEI plate | $19–25 | Swap plates and keep printing while one cools |
| Vacuum bags + indicating silica | $15–30 | Cheap long-term dry storage |
| Filament dryer | $117–140 | Revives wet spools, prevents failed prints |
One piece of honest advice: skip the 30-piece tool kit. Most of those pieces duplicate what shipped with your printer. Spend that money on a second build plate instead — a spare textured PEI plate around $19–25 lets you pull a finished part, swap in the cold plate, and start the next print without waiting for cooldown.
Building The Smart First Purchase List
Right after unboxing, order the finishing trio — flush cutters, a scraper, and a deburring tool — plus IPA and a microfiber cloth for plate cleaning. The second purchase wave is the reliability gear: a spare nozzle, a filament dryer if you print PETG or nylon, and an adhesion aid if your first layers misbehave. If you’re comparing options and want a tested shortlist, our top-rated 3D printer accessories guide breaks down the specific picks worth buying.
Calipers matter most if you design your own parts — they’re how you confirm the printer matched your model.
Two safety notes: keep a smoke detector and fire extinguisher near the printer — that’s community-standard advice — and handle cutting tools with care. A rotary tool helps with sanding and support removal on harder prints, but it’s a post-processing tool, not a printer-core one.
By [Raise3D’s own guidance](https://www.raise3d.com/academy/3d-printer-accessories/), the gear above is what turns a stock printer into a reliable production tool. Buy the eight items, skip the kits, and you’ve covered every common failure mode.
FAQs
Do I need a filament dryer if I only print PLA?
PLA is less moisture-sensitive than nylon or PETG, so a dryer isn’t strictly required. But if prints start stringing or popping, moisture is the likely culprit, and a dryer fixes it. Dry storage with desiccant is a cheaper preventive step for any filament.
What’s the difference between a hardened nozzle and a regular one?
Standard brass nozzles wear quickly when printing abrasive filaments like carbon-fiber or glow-in-the-dark materials. Hardened steel nozzles resist that wear and last much longer, though they cost more. If you print abrasives regularly, the upgrade pays for itself.
Can I use any adhesive on my build plate?
Plain glue stick works on many surfaces, but specialty adhesives are formulated for specific plate and material pairings. Magigoo, for example, sells variants tuned for PP and PA. Check your plate’s compatibility before switching adhesives.
References & Sources
- Raise3D Academy. “3D Printer Accessories.” Lists core accessory categories, drying requirements for moisture-sensitive filaments, and example product names.
