Most bathrooms need 50 to 80 CFM, sized at 1 CFM per square foot, and rooms over 100 square feet add up fixture by fixture.
For the full breakdown, see our best 150 CFM Bathroom Fan guide.
Most bathroom fans get chosen by blade diameter, but the rating that decides whether steam actually clears is CFM — cubic feet of air moved per minute. For most homes, what CFM for a bathroom fan is needed comes down to floor area: 1 CFM per square foot, with 50 CFM as the minimum for small bathrooms.
A 5-by-8-foot bath is 40 square feet, so it takes the 50 CFM floor. A 10-by-8-foot bath needs 80 CFM. Those numbers line up with the International Residential Code, which requires 50 CFM of intermittent or 20 CFM of continuous exhaust in bathrooms, and with the Home Ventilating Institute’s (HVI) recommendation of about eight air changes per hour. Sizing matters because an undersized fan leaves moisture and mildew behind, while an oversized one wastes energy and drones. Here’s the two-minute calculation for your exact room, what changes above 100 square feet, and where buyers go wrong.
Sizing a Bathroom Fan: The 1 CFM Per Square Foot Rule
The 1 CFM per square foot shortcut works for bathrooms up to 100 square feet with a standard 8-foot ceiling. HVI’s bathroom exhaust fan guidance ties this rate to eight air changes per hour — the ventilation level it generally suggests.
Ceilings above 8 feet change the math, because you are ventilating volume, not floor area. Broan-NuTone’s sizing method multiplies length by width by height in feet, then multiplies by 0.13 for the minimum CFM and rounds up to the next ten. On an 8-foot ceiling, that formula lands almost exactly on 1 CFM per square foot.
Example: a 9-by-6-foot bath with a 9-foot ceiling holds 486 cubic feet. Times 0.13, that is 63 CFM, so you round up to 70 — noticeably more than the 54 CFM a floor-area-only guess would suggest. The volume method is the one to use whenever the ceiling is higher than standard.
Here is what the shortcut gives you for a standard-ceiling bathroom:
| Bathroom Floor Area | Minimum Fan CFM |
|---|---|
| Up to 50 sq. ft. | 50 CFM |
| 60 sq. ft. | 60 CFM |
| 70 sq. ft. | 70 CFM |
| 80 sq. ft. | 80 CFM |
| 90 sq. ft. | 90 CFM |
| 100 sq. ft. | 100 CFM |
| Over 100 sq. ft. | Size by fixture instead |
What Size Fan Does a Bathroom Over 100 Sq. Ft. Need?
Above 100 square feet, floor area alone understates the load, so size by fixture: 50 CFM for each toilet, shower, or bathtub, and 100 CFM for a jetted tub. Total the fixtures, and that is the fan’s minimum.
A 120-square-foot bath with a toilet, shower, and standard tub comes to 150 CFM (50 + 50 + 50). If that is your number, the best 150 CFM bathroom fans we’ve tested are worth a look before you buy. A jetted tub counts as 100
