Attaching a kids bike to an adult bike works best with a purpose-built tow coupler like a FollowMe Tandem or Trail-Gator
The safe way to attach kids bike to adult bike is with a manufactured coupler, not improvised straps. Two designs dominate: a coupler that clamps to the adult bike’s rear axle and the child bike’s front end, or a tow bar that mounts to the adult bike’s seat post. Both convert the child’s bike into a towable trailer-cycle, letting your kid pedal along or coast while you do the work.
Towing Styles That Work
Three main products solve this problem, each with a different attachment point. Your choice comes down to the bikes you own and how involved you want your child to be.
- FollowMe Tandem-style coupler: Mounts to the adult bike’s rear wheel with a quick-release skewer or axle adapter, then clamps to the child bike’s down tube. The child bike rides upright behind you, so the kid can pedal or simply roll.
- Trail-Gator-style tow bar: A rigid bar that clamps to the adult bike’s seat post and bolts to the child bike’s front fork via a mounting plate. It holds the child’s front wheel off the ground, turning the bike into a trailer-cycle.
- Tag-along or trailer-cycle: A child’s half-bike with one wheel that attaches to the adult bike’s rear end, letting the child pedal along. Burley makes a popular version.
How to Attach a FollowMe Tandem
This system secures to both bikes in about ten minutes once you’ve done the initial setup. The adult bike needs a quick-release rear wheel or the correct axle adapter.
- Remove the adult bike’s quick-release skewer from the rear wheel.
- Insert the special skewer that came with the coupler, tighten it, and close the lever.
- Attach the frame strap or yoke to the adult bike’s frame.
- Mount the coupling unit onto the newly installed skewer.
- Tighten the black thumb screws and secure the safety pin.
- Thread the strap through the child bike’s seat rails and clip it closed.
- Adjust the strap length so the tow frame sits level, then attach it to the child bike.
When the coupling is secure and the strap is snug, the connection is ready to ride.
How to Attach a Trail-Gator
The Trail-Gator uses the seat post as its anchor point, which means seat post diameter matters.
- Remove the seat post from the adult bike.
- Slide the hitch onto the seat post.
- Reinstall the seat post and tighten the hitch bolts.
- Extend the tow bar and lock it with the safety pin.
- Attach the tow bar to the child bike’s front mounting plate.
- Align the holes, insert the quick release, and tighten it.
- Connect the other end of the tow bar to the adult bike’s hitch.
If it’s lower, the child’s wheel can drag; if it’s higher, the front end may feel unstable.
Compatibility and Safety Caveats
Before buying a coupler, measure everything. Many systems require a quick-release rear wheel, a specific axle adapter, or a seat post within a narrow diameter range. Frame shape and axle type can block installation entirely, and some setups need a front-wheel mount or down-tube clamp that the child’s bike may not accept.
Improvised methods exist — some parents use a ratchet strap to create a temporary horizontal top tube, or strap the child’s front wheel to a rear rack. These are experimental and not manufacturer-endorsed. A rack-mounted setup can sway if the rack or hub mount isn’t secure, and it may interfere with other accessories. If your fit is unclear, a bike shop can confirm compatibility before you ride.
For the bikes that fit, these couplers work well. The child can pedal when they want and coast when they tire, and you control the steering and braking the whole time.
Cycling UK recommends tag-alongs and trailer-bikes as a great way for children to build confidence on the road, and REI’s expert advice covers similar ground. Consumer Reports includes towing options in its buying guide for riding with kids.
If you’re ready to shop, see our roundup of the best baby bike attachment options to compare models side by side.
FAQs
Can any kids bike be attached to an adult bike?
No. Most couplers require a quick-release rear wheel on the adult bike, a seat post or axle within a specific size range, and a child bike with a compatible down tube or front fork. Measure your bikes against the manufacturer’s spec before buying.
Is it safe to tow a child bike with a DIY strap?
Improvised strap methods are temporary and experimental, not manufacturer-endorsed. They can sway or detach at speed, so a purpose-built coupler with a locking mechanism is the safer choice for regular rides.
How much clearance does the child’s front wheel need?
With a tow-bar system like the Trail-Gator, the child’s front tire should sit roughly 3 to 5 inches off the ground. Too low and the wheel drags; too high and the front end becomes unstable.
References & Sources
- Cycling UK. “Guide to Tag-Alongs and Trailer Bikes.” Explains how trailer-bikes attach and their benefits for children riding with adults.
- REI Co-op. “Cycling with Children.” Expert advice on towing options and safety considerations for family rides.
- Consumer Reports. “Bike Trailers Buying Guide.” Overview of towing product categories, including tag-alongs and trailer-cycles.
