How to Reset Boat Bluetooth Speaker? | Factory Reset Steps

A boAt Stone speaker resets by holding the power button for 8 seconds, clearing Bluetooth history and restoring default settings.

For the full breakdown, see our best Boat Bluetooth Speaker guide.

When your boAt speaker won’t turn off or stops responding, a reset usually fixes it. The process clears the Bluetooth pairing history and returns the speaker to factory defaults, which solves most connection hiccups. Here’s the exact reset procedure for boAt Stone speakers, straight from boAt’s official support documentation, plus what to do after the reset.

The 8-Second Power Button Reset

The primary reset method for boAt Stone speakers is simple: press and hold the power button for 8 seconds. Keep holding even after the speaker powers down or shows any indicator light change. The speaker clears its Bluetooth connection history and returns to default settings when the hold completes.

boAt’s official support page documents this as the main reset for the Stone 358 Pro, and the guidance applies across the Stone line, including the Stone 352. Use this method when the speaker doesn’t turn off or doesn’t respond properly to normal controls.

Hardware Reset Button Method

Some boAt Stone models, including the Stone 358 Pro, have a dedicated hardware reset button. Locate the small recessed button behind the AUX port on the speaker’s back panel. Use a pointed object — a paperclip or SIM ejector tool works well — to press and hold that button.

The hardware reset achieves the same result as the power-button method: it sets the speaker back to its default factory state. Take care when inserting the pointed object, since pressing too hard can damage the AUX port or the surrounding housing.

What the Reset Does and When to Use It

Both reset methods clear the speaker’s stored Bluetooth connection history and restore default settings. That means any paired phones, tablets, or laptops are forgotten, and the speaker reverts to its out-of-the-box state for new connections.

boAt recommends performing a reset when the speaker behaves abnormally. The two documented scenarios are:

• The speaker doesn’t turn off when you press the power button
• The speaker doesn’t respond properly to button presses or commands

Resetting is also a solid first step if you’re troubleshooting pairing failures, audio dropouts, or a speaker that connects to the wrong device. Since the reset wipes pairing history, you’ll need to re-pair your phone afterward — the speaker enters pairing mode automatically after the reset completes, so the process is quick.

Model Variations and Caution

Reset behavior can differ between boAt models. Unofficial sources mention reset procedures for the Stone 350 Pro, Stone 650, and Stone 650 R, but those instructions aren’t authoritative and vary in button combinations and hold times. Stick to the official steps for your specific model.

Check boAt’s support page for your exact speaker model before attempting any reset. If your model has a documented reset button, use the power-button method as the default — it’s the most consistent across the Stone lineup. For a speaker still under warranty, contact boAt support if the reset doesn’t resolve the issue.