How Does a Switched Power Strip Work? | Cut Standby Power Automatically

A switched power strip cuts power to peripherals automatically when the device plugged into its master outlet turns off.

That’s the whole idea behind a switched power strip: stop wasting electricity on the “phantom” power that monitors, speakers, and chargers draw all day while the TV or computer they serve is off. One outlet controls the rest, and the strip does the switching for you—no remembering to hit a button.

The Basic Setup: One Outlet Calls the Shots

A switched power strip has three kinds of outlets: control, switched, and always-on. Each plays a specific role.

You plug your TV or desktop computer into the control outlet. That device acts as the “master.” When it powers on and starts drawing current, the strip senses it and energizes the switched outlets. When the master device powers off and current draw falls, the strip cuts power to those switched outlets. A threshold inside the strip decides when the draw is high enough to count as “on,” which is why some models let you adjust the sensitivity. Whether the strip uses current sensing or a control circuit, the result is the same: your peripherals follow the master device’s on/off state automatically.

Some models also include always-on outlets that stay energized no matter what the master device does. Plug anything that can’t afford a shutdown—modems, routers, cable boxes, DVRs—into these.

How You Use It: TV and Computer Workflows

Setting one up correctly means thinking about which devices should follow the master and which must stay powered. Here are the two most common layouts:

For a TV setup

  • Control outlet: TV
  • Switched outlets: Soundbar, Blu-ray player, AV receiver
  • Always-on outlets: Cable box, modem/router

For a computer setup

  • Control outlet: Desktop or laptop
  • Switched outlets: Monitor(s), printer, speakers
  • Always-on outlets: Phone charger, router, fax machine

Always make sure the strip is plugged into a grounded outlet. And if the strip has a side switch, flip it on before connecting your devices.

What Not to Plug Into a Switched Outlet

The most common mistake is plugging the master device into a switched outlet instead of the control outlet. The strip can’t sense the master’s state, and everything stays on (or refuses to switch).

Equally important: keep network devices and anything that must stay reachable off the switched side. Documents from the U.S. Department of Energy’s NREL lab specifically note that routers, cable boxes, landline phones, and fax machines belong on always-on outlets. A switched shutdown on a router means dropped connections and interrupted sessions for everything on your network.

A second consideration is low or variable standby draw. If your master device barely sips power in standby, the strip may not detect the difference between on and off. Some advanced power strips offer a threshold switch with high, medium, and low settings so you can match the sensitivity to your device’s actual draw.

Not all “advanced” power strips work the same way either. Some use motion sensors instead of a master outlet, and others add timers or schedules. Master-controlled strips are the standard, but if the product you have doesn’t behave as expected, check whether it’s one of those other types.

Do They Actually Save Meaningful Energy?

Setup What Gets Cut Best For
Home theater Soundbar, Blu-ray player, receiver TVs that draw little in standby
Home office Monitor, printer, speakers Desktops used daily
Always-on only Nothing—strip stays hot Steady network gear like routers

For most households, a switched strip saves a modest amount per month—not a bill-transforming number, but real and automatic. The bigger win is eliminating standby draw on a whole cluster of devices with zero ongoing effort. Just avoid the trap of plugging high-draw or network-critical devices into the switched banks by accident.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.