Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A bathroom fan that wheezes, rattles, or smells like burnt dust is rarely worth a full ceiling replacement. The smart fix is swapping out the motor and wheel inside the housing you already have — a 10-minute job that costs a fraction of a new fan. This guide walks you through the best exhaust fan replacement kits and, more importantly, how to check the fit before you order.
I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you’re reviving a 1970s NuTone or a newer Broan, matching the CFM and mounting dimensions matters most. Find the right bathroom exhaust fan replacement kit and you’ll clear steam fast without the noise and the expense of a full rewire.
Our Picks at a Glance



How To Choose The Best Bathroom Exhaust Fan Replacement Kit
The most common mistake is buying a motor that looks similar but won’t bolt to your housing. Your first step is to pop off the grille and find the model number on the fan body, then measure the distance between the motor’s mounting studs. A kit that’s 1.882 inches on center fits a huge range of Broan and NuTone housings, while other motors use a completely different bolt pattern.
Match Airflow (CFM) to Your Room
CFM (cubic feet per minute) tells you how much air the fan moves. A 50 CFM motor is the standard for most small to mid-size bathrooms, while 70 CFM suits larger rooms or fans that need to clear steam fast from a big shower. It’s safe to replace a 50 CFM unit with a 70 CFM motor if it fits the housing physically, but going down in CFM leaves you with foggy mirrors.
Decode the Noise Rating (Sones)
Sones measure perceived loudness — the lower the number, the quieter the fan. A 1.0-sone fan is a near-silent whisper, while a 6.0-sone unit is a loud, obvious whoosh. If the fan sits right over your toilet, that noise level matters more than any other spec. Higher-sone motors often move more air, so you balance hum against ventilation.
Quick Comparison
| Model | Best For | Airflow | Speed | Motor Specs | Amazon |
|---|---|---|---|---|---|
| NOOTO S97012038 Kit★ Best Overall | Broan 659-688 fit | 50 CFM | 3000 RPM | 0.29A | Amazon |
| Broan-NuTone C350BNRGenuine OEM | Genuine OEM swap | 50 CFM | 3000 RPM | 4.0 Sones | Amazon |
| BOJACK YJF6178Max Airflow | Pre-1986 Broan 671 | 70 CFM | 3400 RPM | 1.1A | Amazon |
| CLLOMAGY 696N-R02 | Motor + grille combo | 50 CFM | 1800 RPM | 2.0 Sones | Amazon |
| BOJACK YJF6158 | Mobile home fans | 686-8870 fit | 3500 RPM | 0.60A | Amazon |
| PANDEELS SM550 2-Pack | Two fans at once | 50 CFM | 3000 RPM | 0.29A | Amazon |
| Air King AS50 KIT | Air King AS50 fans | AS50 fit | 2125 RPM | 0.06 hp | Amazon |
| Broan-NuTone RE70BN | 70 CFM upgrade | 70 CFM | 3000 RPM | 6.0 Sones | Amazon |
| Ceoighe 2-Pack | Vintage Broan N688 | 50 CFM | 3000 RPM | 1A | Amazon |
In-Depth Reviews
1. S97012038 Bathroom Vent Exhaust Fan Motor Replacement Kit
Our pick — over 4.5★ from 150+ verified ratings; the strongest balance of quality and price.
Rescues 25-year-old Broan fans that no modern motor replaces.
Your aging Broan 680 hums, but the housing is still solid — this kit is the lifeboat. It’s a 120V motor rated at 0.29A with a 3000 RPM spin, and its short 6.37-inch power cord ends in a 2-claw plug that clips straight into your existing wiring. Owners of the 659, 662, 663, 668, 678, and 688 all confirm it bolts in without cutting or ceiling retrofit.
The defining win is how it revives fans of an uncommon size. Buyers report: “Perfect fit to repair a 25 year old Broan 680!” — a fan size that’s not common today, which saves you from buying a whole new assembly and cutting into the ceiling. The motor and its 4.5-inch blower wheel arrive together, with a mounting bolt spacing of 1.73 inches that lines up with the original bracket’s holes.
Reliability is what owners praise most, with noise level close behind — the shaft runs a bit longer than some originals, but it still fits fine and runs quieter than the old unit it replaces. It’s the crowd’s go-to because it works like it should and slides into place, which is exactly why it earns the Best Overall spot over the other 50 CFM options.
Why it wins
- Smooth, quiet operation that matches or beats the original
- Motor plus blower wheel in one box — nothing else to buy
- Simple 2-bolt install through the existing bracket
Watch on fit
- Shaft runs slightly longer than the OEM part — harmless, but worth knowing
- 40% less airflow than the BOJACK YJF6178’s 70 CFM
Grab it for: any 25-plus-year-old Broan 659-688 that still has good housing but a dead motor.
Look elsewhere if: you need 70 CFM output for a large bathroom — this tops out at 50 CFM.
2. Broan-NuTone Genuine Replacement Motor/Wheel for 50 CFM Bathroom Fans
The factory part that slides in with a 90-second plug-and-play swap.
When you want the exact part the manufacturer designed, this is it — a genuine Broan-NuTone motor and wheel built to run at peak performance. It’s a 50 CFM unit at 4.0 sones, and its 3000 RPM motor is the direct match for older NuTone 696N models with the 8 x 7.25-inch housing made before 1999. Owners love that it’s a true 90-second install: unplug the old one, plug this one in, done.
You get a motor that feels sturdier than cheap aftermarket ones, and owners mention it holds up better over time. It does run louder than budget motors, but it’s quieter than the 30-year-old OEM (original equipment manufacturer) part it replaces — a fair trade for a component that can outlast the fan housing. The included mounting plate saves you from hunting for hardware, and the 1.6-pound metal body feels solid when you hold it.
Installation is the most-praised aspect by a wide margin, and the functionality follows right behind. Measure your housing first, though — this part is NOT compatible with the 696N, 696N-R01, R02, or R03 models that use the smaller 7.25 x 7.5-inch housing. Buyers who ordered the wrong size for a second bathroom caught it before opening the box and swapped it out the next day.
OEM assurance: the factory-tested part with a mounting plate included, so the swap is genuinely plug-and-play.
Honest caveat: at 4.0 sones it’s louder than the quieter aftermarket picks, and you must check your housing size first.
3. BOJACK YJF6178 Bathroom Vent Fan Motor 70CFM
The 70-CFM workhorse that clears steam and adds a privacy hum.
If your bathroom steams up faster than your current fan can clear it, this BOJACK motor is the upgrade. It pushes 70 CFM on a 1.1A draw — a 40% airflow edge over the 50 CFM NOOTO kit above — and spins at 3400±100 RPM with a 5.27-inch flat paddle blade. It’s the go-to for older Broan 671A, 671, 655, and Nautilus N678 housings, including pre-1986 units with smaller mounting space.
A 132W motor this strong runs louder than the old motor it replaces, and buyers call that a feature: the whoosh masks bathroom sounds, which some owners genuinely appreciate. The trade-off is real, though — it’s not a silent fan. What wins people over is how easy it fits: “Good replacement for a pre-1986 671-A” is the recurring verdict, with the motor and impeller dropping into the old mounting plate without modification.
Installation earns the most praise, followed closely by performance — owners note the housing space is smaller than modern installs, and this kit is one of the few that works with the older plate. The 8.661-inch wire and 2-prong plug keep wiring simple, and the sealed bearing design keeps dust out. It’s the pick when you want maximum air movement over whisper-quiet operation.
Airflow king: the 70 CFM output is a genuine upgrade over every 50 CFM kit here.
Know the hum: this is a loud, powerful motor — perfect for privacy and steam, wrong for a quiet minimalist bathroom.
4. CLLOMAGY 696N-R02 B Unit Replacement Grille Kit
One box for the motor and a fresh white grille — no drywall cutting.
Most dead fans need more than just a motor — the grille is yellowed or cracked after decades. This CLLOMAGY kit bundles the S97012026 fan motor with the 97011723 replacement grille, so you refresh the whole ceiling look in one go. It fits Broan 663, 670, 671, 688, and 689 fans with the 7.5 x 7.25-inch housing, moving 50 CFM at a listed 2.0 sones.
The grille measures 9 x 9.5 inches and ships with two sets of springs — you squeeze the metal springs and insert them into the ceiling, which means no cutting and no taping. Installation is where this kit shines: the motor comes pre-mounted, and customers note a one-minute install that’s plug-and-play. The fit earns the top praise, with owners calling it a perfect replacement that needs no alterations.
Here’s the honest wrinkle: the noise situation is the most-discussed point, and it’s mixed. Some find it reasonably quiet, but others report rattling starting within two weeks, and one reviewer noted it’s not actually quieter than the 4.0-sone original despite the 2.0 rating — the thinner plastic blades raise the pitch. For the money, you get a complete ceiling refresh, but don’t buy it expecting a silence upgrade.
The draw
- Motor and grille together — freshens the whole ceiling
- Spring-mounted grille means zero drywall work
- Pre-mounted kit installs in about a minute
The trade-off
- Noise verdict is split — some hear rattles within two weeks
- Listed 2.0 sones doesn’t always translate to quieter than the old fan
Best for: a dated fan with a yellowed grille — this refreshes both in one cheap step.
Not for: anyone chasing true quiet; the noise level is a coin flip.
5. BOJACK Bathroom Vent Fan Motor 120V 60Hz 0.60A
The budget motor that mobile-home owners buy in threes.
There’s a reason this BOJACK motor is a favorite for older trailers and mobile homes — it’s one of the few that works with the narrow mounting brackets found there. It’s a 120V motor drawing just 0.60A at 30W, spinning at 3500 RPM with a 6.6-inch flat paddle blade, and it’s UL/CSA certified for safety. Owners replacing 40- and even 50-year-old motors report strong airflow that belies its small draw.
Functionality is the top praise, with installation right behind — the 1.882-inch mounting studs line up with existing brackets, and the 6.496-inch wire with 2-prong plug keeps the swap simple. Buyers have bought three at once for double-wide trailers, trimming the blade width slightly with a belt grinder to fit narrower vent pipes. A 30W motor can’t match the 132W BOJACK above for sheer force, but it’s quiet and dependable for its size.
The noise debate is real but lopsided — many owners expected loud based on reviews and were surprised it wasn’t. The bigger honest note: with two shower heads running, it can struggle to keep mirrors fog-free, which is a CFM limitation rather than a motor flaw. If your bathroom has a single shower and an old 686, 687, or 8870 fan, this is the cost-effective revival.
Reliable budget pick: a quiet, strong motor for old fans, especially in mobile homes where fit is tricky.
Reality check: 30W is light duty — a big double-shower bathroom will beat it.
6. PANDEELS SM550 Universal Bathroom Fan Motor Kit (2 Pack)
Two universal motors for the price of one — ideal for a two-bath home.
When two fans fail at once, or you want a spare ready in the drawer, this PANDEELS 2-pack is the smart buy. Each motor is a universal SM550 running at 120V, 50 CFM, 0.29A, and 3000 RPM, with a power plug already attached so you never touch live wiring. The copper construction is the same build as the NOOTO at the top, and 34.8W each keeps power draw low.
The compatibility list is the real story — it replaces 65100, C65878, EM550, EM750, and more, fitting Nu-Tone, Broan, Uppco, Bay Motors, Sears 569, and Dayton fans. Buyers have used it to resurrect 1970s fans and a 1998 system, and a 30-year-old NuTone, all without removing the full assembly. Performance is the most-praised aspect by far, with noise close behind as a positive — most find it notably quiet.
Installation runs about 10 minutes per fan, but there’s one wrinkle: no instructions are included. Owners warn to pay close attention when removing the old motor so you can reverse the process, and some found the rotor shaft bearings needed a small swap or bracket reversal to match their OEM. It’s not always a pure plug-and-play, but for two fans at this price, the value is hard to argue.
Why two is better
- Two complete motors for a two-bath fix or a backup on the shelf
- Quiet operation praised across ages of fan housings
- Universal fit spans Broan, NuTone, Uppco, and more
Small catches
- No instructions — study the old motor before you pull it
- Some housings need a bracket or bearing swap to align
Reach for this if: you have two dead fans or want a cheap spare ready.
Think twice if: you want zero fuss — some units need a bit of bracket adjustment.
7. Air King AS50 KIT Advantage Bath Fan Motor and Blade Kit
The same-brand replacement that needs exactly one screw.
If your fan is an Air King AS50, this is the part that just works. It’s a 0.06 hp motor rated at 2125 RPM with the fan blade already assembled, built in alloy steel — and it comes with the mounting bracket included, which buyers didn’t expect and appreciated. The kit measures 8 x 6 x 8 inches, sized specifically for the AS50 housing.
Installation is the standout feature: one screw and a standard household plug. Owners describe it as a direct fit with no sizing, shape, or attachment issues, and the cord runs a bit longer than the original — irrelevant once the cover goes back on. It’s the kind of swap you finish before your shower water even gets hot.
An original motor that burned out is the common failure this fixes, and reviewers point out perfect alignment and a quiet, effective fan afterward. The noise level is mixed — some say it’s quieter than the original, others find it noisy, so treat the sound as average. Just verify your fan is genuinely the AS50 model before ordering, because the fit is purpose-built for that one housing.
Same-brand simplicity: a one-screw swap with the bracket included for Air King AS50 owners.
Scope check: this fits the AS50 specifically — measure and confirm before you buy.
8. Broan-NuTone RE70BN 70 CFM Replacement Motor Kit
The genuine Broan kit that beefs up a weak 50 CFM fan.
This is the factory upgrade path: a genuine Broan-NuTone motor kit that delivers 70 CFM for select 70 CFM fans, or up to 40% more power when dropped into a 50 CFM fan. It operates at 6.0 sones, which tells you honestly that this is a powerful, audible fan — but it moves air noticeably faster than the 50 CFM unit it often replaces. The kit includes the motor, blower wheel, two motor mounting plates, and all hardware.
The compatibility list is extensive: Broan 670, 671, 688, 689, EC50, EC70, NuTone 693, 695, 696N, and Nautilus N671 and N688 — with the clear note that it does NOT fit the 8 x 8.25-inch housings. Owners have used it as a direct fit for 1970s Mercury-Nutone Scovill 50 CFM fans, finishing the install in under 15 minutes with a simple plug-and-play swap. The two mounting plates give you flexibility for different bracket configurations.
Installation is the most-praised aspect, with performance second — it moves more air, full stop. The loudness is the recurring gripe: one owner called it “very very loud” and planned to replace it, while others found the whoosh acceptable for the airflow gain. A sharp edge on a plate cut a hand during install, so wear gloves. This is the right pick when you prioritize ventilation over silence.
Factory muscle: a genuine Broan kit that turns a weak 50 CFM fan into a 70 CFM performer.
Noise warning: at 6.0 sones this is the loudest kit here — airflow and quiet don’t mix in this box.
9. Ceoighe 2-Pack Vent Fan Motor and Ceiling Blower Wheel Kit
Two motors that pair perfectly with vintage Broan N688 housings.
This 2-pack is aimed at the vintage Broan crowd, replacing motors in the 659, 662, 663, 668, 688, and 678 lines with a 120V, 1A, 50 CFM unit spinning at 3000 RPM. The shaft measures 3/16 x 1.5 inches with splines, and the 6.5-inch wire ends in a 2-prong plug — a setup that slots into older housings like the Broan N688 and even the 763RL. Both motors come with their blower wheels, so it’s a true two-fan kit.
Functionality is the top praise, with installation close behind — owners love that it plugs straight in and runs quiet against the original. The shaft is shorter than some standards, which is exactly what makes it fit the older Broan units so well. Wiring is reversible, giving you CCW or CW rotation to match your housing.
Here’s the honest catch, and it’s a real one: durability draws the negative feedback, with several owners reporting the motor seizing after about 8 months of use. Others report a multi-year lifespan that beats the OEM, so it’s a lottery. The included blade also has a hole that’s slightly too tight on some shafts, and one buyer mentioned the new blade is perpendicular rather than curved, hurting airflow — the fix is reusing your old blade. It’s a great value for vintage fit, but not the durability king.
The value
- Two complete motor and wheel kits for the price of one
- Short shaft fits vintage Broan N688 and 763RL housings
- Quiet operation praised against original fans
The gamble
- Durability is the weak spot — some seize after roughly 8 months
- New blade may need swapping for your old curved one
Choose this for: a vintage Broan that needs a cheap, quiet, two-fan fix.
Pass if: you want a set-and-forget motor; the lifespan is inconsistent.
Understanding the Specs
Airflow: CFM
CFM (cubic feet per minute) is the fan’s work rate — how much air it moves each minute. A 50 CFM motor clears a standard bathroom, while 70 CFM suits bigger rooms or powerful showers. If you swap a 50 CFM motor for a 70 CFM one, you clear steam faster, but you’ll hear the difference in sones.
Loudness: Sones
Sones measure perceived loudness on a linear scale — 2.0 sones is a gentle hum, 4.0 is a noticeable whoosh, and 6.0 is a loud, obvious fan. Match the sone rating to where the fan sits; a fan right above the toilet deserves a lower-sone motor than one at the far end of the room.
FAQ
How do I know which motor replacement kit fits my bathroom fan?
Can I put a 70 CFM motor in a fan housing rated for 50 CFM?
Will a replacement motor require electrical wiring work?
How long does a bathroom exhaust fan motor replacement take?
What does the sone rating mean for my bathroom fan noise?
Is a 2-pack motor kit worth it if I only have one bathroom fan?
Can I replace just the motor or do I need a new fan blade too?
Why does my new motor run louder than my old fan?
What should I check before ordering a replacement motor kit?
Can a replacement motor kit fix a fan that stopped spinning?
Final Thoughts: The Verdict
The crowd favorite for most people is the S97012038 kit — the 50 CFM, 0.29A motor that revives aging Broan fans with the least fuss. If you want genuine factory parts and a 90-second swap, grab the Broan-NuTone C350BNR. And for the strongest airflow, the BOJACK YJF6178 with its 70 CFM output leads on power — just be ready for the noise that comes with it.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of August 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.






