How to Choose Safety Glasses | A Simple Selection System

Choose safety glasses by matching them to the hazard, then verify they carry an ANSI/ISEA Z87.1 marking.

Picking the right safety glasses comes down to one core rule: match the eyewear to the specific hazard in front of you, then confirm it meets the right standard. The shortcut most people miss is the marking stamped right on the lens or frame — Z87 or Z87+ tells you exactly what level of protection you’re holding.

That marking matters because an unmarked pair of “safety-looking” glasses may offer little more than style. Here’s the system for choosing eyewear that actually protects you, from the marking to the fit.

What Does the Z87 Marking Actually Mean?

The Z87 mark is the shorthand for compliance with the ANSI/ISEA Z87.1 standard, the American National Standard for occupational and educational eye protection. The American Academy of Ophthalmology recommends choosing eyewear with “ANSI Z87.1” marked on the lens or frame, and the CDC confirms that industrial eyewear will carry one of these marks:

  • Z87 — standard impact protection for normal safety wear
  • Z87+ — high impact protection
  • Z87-2 — prescription lenses at standard impact
  • Z87-2+ — prescription lenses at high impact

If you wear prescription glasses and need safety eyewear, you’ll want the Z87-2 or Z87-2+ marking, meaning the eyewear incorporates prescription lenses and still meets the standard.

Match The Eyewear To The Hazard First

A hazard assessment comes before any purchase. The University of Wisconsin’s environmental health guidance says supervisors should weigh the specific workplace hazards, proper fit and comfort, unrestricted vision and movement, and durability before choosing a product.

Different hazards demand different lens materials and designs. A common mistake is buying one pair for every job without checking what the task actually exposes you to.

  • Flying debris or impact: Choose impact-rated glasses, and polycarbonate is the recommended material for its shatter resistance.
  • Chemical splash:
  • Dust and particles: Side protection or enclosed goggles work best depending on how much exposure you face.
  • Laser work: This requires a qualified laser safety officer to review the actual laser system and required optical density — never rely on a generic safety-glasses marking.

This is the step people skip. Picking the style you like before checking the hazard is the most common mistake in the whole process.

Check The Fit, Lens Material, And Coatings

A standard-compliant pair is useless if it slips off your face or pinches your nose. UVEX’s fit guidance is the practical checklist here: no pressure points, no pinching nose piece, visibility in all directions, balanced weight, and frames that sit close to the face.

Lens material matters beyond just impact. Polycarbonate resists shattering and can provide UV protection, per the American Academy of Ophthalmology. Acetate, while preferred for chemical resistance, is a different trade-off, so the material choice should follow the hazard assessment you did first.

Coatings extend the life of the eyewear and keep it wearable. Anti-scratch coatings protect the surface, while anti-fog coatings — which can be hydrophobic or hydrophilic — keep lenses clear in humid environments. If the glasses fog up, you’ll take them off, and then they protect nothing.

If you need prescription lenses, the eyewear should either fit over your glasses or incorporate them. Prescription safety glasses that carry the Z87-2 or Z87-2+ mark are the clean solution. For a tested roundup of options, see our picks for the best ANSI Z87.1 prescription glasses.

Avoiding The Common Mistakes

The mistakes repeat across every job site. Skipping the hazard assessment tops the list, followed closely by buying on style before checking the marking. Fit gets ignored until the glasses are uncomfortable enough to leave in the toolbox.

Fogging and slipping are the two problems that stop people wearing their eyewear consistently — and eyewear that isn’t worn protects no one. The fix is selecting coatings and frames that match the conditions you actually work in.

Finally, never assume a generic “safety-looking” frame is compliant. The Z87 or Z87+ marking is the only reliable proof the eyewear meets the standard, so check the lens or frame before you trust it.

FAQs

Is Z87+ better than Z87?

Yes, for impact protection. The Z87+ marking indicates the eyewear meets the high-impact criteria of the ANSI/ISEA Z87.1 standard, while Z87 denotes standard impact protection. For tasks with flying debris or projectiles, Z87+ is the safer choice.

Can I wear safety glasses over my prescription glasses?

Yes, if they fit properly and don’t interfere with your vision or other PPE. A cleaner option is prescription safety glasses with a Z87-2 or Z87-2+ marking, which are built to meet the standard while correcting your vision in one pair.

Does OSHA require ANSI Z87.1 safety glasses?

OSHA references ANSI/ISEA Z87.1 compliance for protective eyewear and recognizes several editions of the standard. Employers may require newer editions even though OSHA’s official adoption may lag, so check your workplace policy for the specific version it mandates.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.