How Tall Are 275/70R17 Tires? | Size And Fitment

A 275/70R17 tire is about 32.2 inches tall overall, or roughly 818 mm, and is built to fit a 17-inch wheel.

If you’re wondering how tall a 275/70R17 tire is, the short answer is just over 32 inches. That makes the size a favorite for SUVs and light trucks, where that extra height brings more ground clearance and a chunkier stance. The measurement isn’t a guess pulled from the sidewall — it comes from the tire’s own dimensions, and the table below lays out the full picture.

275/70R17 Tire Size: Specs And Dimensions

Published specs for this size typically land between 32.16 and 32.2 inches in overall diameter. The BFGoodrich All-Terrain T/A KO2, for example, is listed at exactly 32.2 inches, with a section width of 11 inches and a 15/32-inch tread depth. Circumference and revolutions per mile vary by brand and model — one source lists 101.1 inches and 646 revs per mile for the KO2, while a general size calculator shows about 101.2 inches and roughly 626 revs per mile.

Measurement Typical Value
Overall diameter 32.16–32.2 inches (817–818 mm)
Section width 10.8–10.83 inches (275 mm)
Sidewall height 7.56–7.58 inches (192.5 mm)
Circumference 101.1–101.2 inches
Revolutions per mile 626–646, depending on tire model

For a specific tire, the published spec sheet is the final word. The KO2’s LT275/70R17 121/118R E RWL listing shows a 32.2-inch diameter, an 11-inch width, an 8.0-inch measured rim, a 3,195/2,910-pound max load, an 80 psi max pressure, and a 55.4-pound weight.

How To Decode 275/70R17

The number sequence tells you everything about the tire’s shape. “275” is the section width in millimeters, “70” is the aspect ratio — the sidewall height is 70 percent of the width — “R” stands for radial construction, and “17” is the wheel diameter in inches.

You can calculate the height yourself: sidewall height equals (section width × aspect ratio) ÷ (100 × 25.4). For 275/70R17, that’s 275 × 0.70 = 192.5 mm, or about 7.58 inches. Double that and add the 17-inch rim, and you get about 32.16 inches. The math checks out against the published 32.2 inches, with the small difference coming down to rounding. BFGoodrich’s dimension page confirms the size breakdown of width 275, ratio 70, and diameter 17.

The most common mistake is confusing overall diameter with section width. The tire is roughly 32.2 inches tall, not 275 mm tall — 275 mm is just the width across the tread.

What Fits And What Changes

This size fits any 17-inch wheel, but rim width matters just as much. The KO2 spec sheet lists a 7.0–8.5-inch rim range with an 8.0-inch measured rim, while some product listings show a maximum recommended wheel width of 9.00 inches. Match the tire’s official spec sheet to your wheel before buying, and don’t rely on one product page alone.

Because a 275/70R17 is a tall tire, it changes more than looks. Going from a smaller factory size can shift your speedometer reading, reduce clearance for suspension and fenders, and alter effective gearing. Check your vehicle’s fitment separately — and if you’re shopping for actual tires to mount, our tested roundup of the best 275/70R17 all-terrain tires is a good place to compare options.

FAQs

How Much Taller Is A 275/70R17 Than A 275/65R17?

About 1.1 inches. The 65-series has a sidewall equal to 65 percent of the width instead of 70 percent, so its sidewall is roughly 6.75 inches versus 7.58 inches. Doubled and added to the same 17-inch rim, the 70-series ends up around 32.2 inches tall while the 65-series sits near 31.1 inches. The width and wheel diameter stay the same.

What Does The “LT” In LT275/70R17 Mean?

LT stands for light truck. An LT tire like the KO2 is built with heavier-duty construction and a higher load range than a standard P-metric passenger tire. In this specific case, the LT275/70R17 carries an E load range, which supports up to 80 psi and a 3,195-pound single-wheel max load. That capacity is why the size is so common on full-size trucks and SUVs.

Will A 275/70R17 Fit My Truck Or SUV?

Fitment depends on the vehicle, but the wheel requirement is fixed: it needs a 17-inch rim, and the recommended rim width is usually 7.0–8.5 inches. Clearance is the variable — this is about 32.2 inches tall, so it can rub on stock suspension or fender liners if the truck wasn’t designed for a tire that tall. Measure your current clearance and confirm the rim width before committing.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.