RV Water Heater Anode Rod Sizes and Thread Types | What Fits Your Tank

Most RV water heaters use a 3/4-inch NPT thread, but the right anode rod depends on your exact tank model, so you must verify before buying.

Buying an anode rod by brand name alone is the fastest way to strip threads or end up with a rod that won’t seal. These RV water heater anode rod sizes and thread types vary more than most owners expect, and the replacement that fits your neighbor’s camper may not fit yours.

The Two RV Anode Rod Sizes That Actually Matter

Thread size is the first compatibility gate, and most US-made units share one dominant pattern. Suburban and Mor-Flo style heaters typically use a 3/4-inch NPT (National Pipe Thread) fitting with a rod length between 9.25 and 9.5 inches.

That covers a lot of RVs, but it doesn’t cover all of them. Some tanks use a 1/2-inch NPT thread, and certain imported or specialty units — including some compact Dometic models and Truma Combi heaters — use metric or proprietary threads that a universal rod won’t fit.

A proper match requires three separate specs:

  • Thread type and pitch (like 3/4″-14 NPT)
  • Rod length (measured, not assumed)
  • Socket or hex size (the wrench that fits the head)

What Thread Types Do RV Water Heaters Use?

US RV water heaters split into two main camps. Suburban units are the most straightforward, with 3/4″-14 NPT threads across their SW6DE, SW10DE, and SW12DE series. Atwood tanks are the reason verification matters: sources conflict on whether they use 3/4″-16 UNF, a 1-inch socket, or 1/2-inch NPT on older models. Treat every Atwood unit as verify-by-model-only.

Spec sheets for common Suburban tanks show how much even one brand can vary:

Suburban Model Thread Spec Rod Length
SW6DE / SW6DE-SP 3/4″-14 NPT 13.25 inches
SW10DE / SW10DE-SP 3/4″-14 NPT 18.5 inches
SW12DE / SW12DE-SP 3/4″-14 NPT 22.75 inches
Camco 11562 replacement 3/4″-14 NPT 9.5 inches

Check The Existing Rod Before You Order

  1. Remove the rod using a 1-1/16 inch socket (27 mm) for most Suburban and Mor-Flo style units; some Atwood units take a 1-inch socket.
  2. This tells you the correct replacement length.

Before you order a replacement, see our tested roundup of the best anode rods for RV water heaters to compare verified fits side by side. The anode rod basics guide from US Water Heater Pro also walks through how these rods protect your tank’s lining.

FAQs

Are all RV water heater anode rods the same size?

What size socket removes an RV anode rod?

Do Atwood water heaters use the same anode rod as Suburban?

References & Sources

  • US Water Heater Pro. “Anode Rods 101.” Explains how anode rods protect RV tanks and why thread and size matching matters.

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.