A loose conduit, a rattling pipe, or a strap that snaps under tension — the wrong two-hole strap turns a five-minute job into a frustrating redo. This guide cuts through the material options and sizing confusion to deliver the exact strapping solutions for EMT, PVC, MC cable, and even leather craft projects.
I’m Min — the co-founder and writer behind Gadgets Feed. My focus is on dissecting the real-world performance of hardware accessories like these, analyzing hundreds of user reviews and technical specs to separate durable tools from flimsy compromises.
Whether you’re wiring a commercial electrical run or securing a DIY project, selecting the right 2-hole strap comes down to matching the material, load, and environmental exposure to a specific product built to handle it.
How To Choose The Best 2-Hole Strap
The best 2-hole strap isn’t universal — it’s built for a specific material and environment. Selecting the wrong type can lead to corrosion, failure under load, or a loose fit that compromises the entire installation.
Match Material to Environment
Zinc-plated steel straps, like those from Sigma and Halex, are the standard for indoor electrical work on EMT and MC cables, offering excellent rust resistance and load-bearing strength. For outdoor or high-moisture areas, stainless steel is preferred. Plastic clips, such as the Soimuk PVC clamps, are non-conductive and ideal for lightweight PEX or PVC runs where corrosion isn’t a concern. Leather straps, on the other hand, are purely for craft and fashion applications like belts and harnesses, offering flexibility and aesthetic finish but absolutely no structural load capacity for conduit.
Check the Inner Diameter and Trade Size
Straps are labeled by trade size (e.g., 1/2-inch, 3/4-inch), but this refers to the nominal conduit size, not the exact outer diameter. Always verify the strap’s inner diameter measurement — for instance, the Sigma strap lists a 0.492-inch inner diameter for 14/2 and 12/2 MC cable. A strap that is too loose will allow the pipe to move; one that is too tight may not snap on properly. The Airmont and Halex straps include a reinforced rib to keep the strap centered and prevent twisting, a feature that ensures a consistent grip.
Count the Holes and Inspect the Design
A true 2-hole strap provides two independent mounting points, distributing the load and preventing the pipe from rotating. Look for slotted holes that allow minor adjustments during installation — a feature on the OHLECTRIC strap. A central rib or reinforced boss adds stiffness to the strap’s curve, preventing it from deforming under screw pressure. For heavy-gauge EMT, a thicker steel profile (16-gauge or better) is critical; thinner straps can warp when tightened, as noted by some buyers of the Airmont 1-1/4-inch strap.
Quick Comparison
On smaller screens, swipe sideways to see the full table.
| Model | Category | Best For | Key Spec | Amazon |
|---|---|---|---|---|
| Halex 1 in. EMT 2-Hole Strap | Electrical | Snap-on EMT conduit runs | 1-inch trade size, UL & CSA listed | Amazon |
| Airmont 1-1/4-Inch EMT Strap | Electrical | Heavy-duty 1.25-inch conduit | Reinforced rib, 25-pack | Amazon |
| OHLECTRIC 3/4 in. Pipe Strap | Electrical/Pipe | General conduit & hose mounting | Slotted holes, 50-pack zinc steel | Amazon |
| Sigma ProConnex 55919M | Electrical | 14/2 & 12/2 AC/MC cable | 0.492-in inner diameter, 100-pack | Amazon |
| Soimuk 3/4 in. Plastic Clip | Plastic/PVC | PEX & PVC pipe runs | Snap-fit, non-conductive PVC, 30-pack | Amazon |
| Belts.com Full Grain Leather | Craft/Leather | Belt blanks & heavy-duty straps | 1.5-inch wide, 100% full-grain leather | Amazon |
| VA Lipskii Leather Strap | Craft/Leather | DIY belts & harness repairs | 2-inch wide, 51-inch length | Amazon |
In‑Depth Reviews
1. Halex 1 in. EMT 2-Hole Strap (50-Pack)
The Halex 61610B stands as a benchmark for snap-on EMT straps. The zinc-plated steel construction resists corrosion for both indoor and outdoor use, and the snap-on feature allows one-handed installation onto the conduit before securing it with screws. At a 1-inch trade size, it’s engineered for standard EMT runs where load-bearing is required.
Users consistently note the strap’s solid feel, comparing it favorably to big-box store options. It has been used creatively for mounting air lines, securing metal headboards to walls, and building chicken tractors, demonstrating its versatility beyond pure electrical work. The 50-pack quantity provides ample supply for multiple projects without a trip back to the store.
Keep in mind that screws are not included in the pack, so you’ll need to supply your own #8 or #10 fasteners. While the strap is sturdy, the thinness can be an issue if over-tightened with a high-torque driver; using a manual screwdriver or setting a torque limiter helps avoid deformation.
Why it’s great
- Snap-on design speeds up installation significantly
- UL and CSA listings guarantee code compliance
- Corrosion-resistant zinc plating works indoors and out
Good to know
- Screws are not included in the pack
- Thinner steel can deform if screws are over-torqued
2. Airmont 1-1/4-Inch EMT Two-Hole Conduit Strap (25-Pack)
When larger diameter conduit demands a strap that won’t flex, the Airmont 1-1/4-inch strap delivers with a reinforced central rib that stiffens the entire curve. This design prevents the strap from bowing outward when the screws are cinched down, keeping the conduit firmly pressed against the mounting surface. The galvanized zinc-plated steel finish provides reliable corrosion resistance.
Users have pressed these straps into service for hanging horse feeders on pipe fences, stabilizing PVC hoops over raised garden beds, and holding flex conduit in place. The thicker metal profile — noted as wider and thicker than original equipment in some applications — gives confidence in load-bearing scenarios. The snap-on feature still allows quick fitting.
Some users have noted that the strap can feel thin compared to commercial-grade hardware from electrical supply houses, and the fit may not be perfect on all 3/4-inch pipe combinations. Pre-drilling pilot holes is recommended to avoid stripping the mounting holes, especially when fastening to metal studs.
Why it’s great
- Reinforced rib prevents twisting and adds rigidity
- Galvanized zinc coating offers good corrosion protection
- Versatile enough for non-EMT uses like PVC and fencing
Good to know
- May require pre-drilling to prevent hole damage
- Some users find it thinner than commercial-grade straps
3. OHLECTRIC Heavy Duty Pipe Strap 3/4-Inch (50-Pack)
The OHLECTRIC pipe strap hits a sweet spot between cost and performance for general-purpose conduit and pipe mounting. The slotted mounting holes are a standout feature, allowing minor positional adjustments after the strap is attached to the surface — a real time-saver when aligning multiple parallel runs. The zinc-plated steel construction offers good rust resistance for indoor use.
Buyers have used these straps in commercial buildings for metal scuppers, and for DIY projects like mounting boards in chicken coops. The metal thickness is a step up from foil-thin budget straps, though it’s not as thick as commercial-grade equivalents. The U-shaped design with a central rib helps keep the pipe centered and prevents rotation.
A few users have flagged that the strap bends easily if over-tightened, and it may not be robust enough for high-vibration industrial environments. The 50-pack count provides great value for medium-scale projects, but the included screws are basic and may need upgrading for heavy loads.
Why it’s great
- Slotted holes allow easy alignment during installation
- Thicker metal than bargain-bin alternatives
- Versatile for EMT, PVC, and hose applications
Good to know
- Not commercial-grade; can bend under high torque
- Included screws are basic and may not suit all surfaces
4. Sigma Engineered Solutions ProConnex 55919M One-Hole BX Strap (100-Pack)
Though marketed as a one-hole strap, the Sigma ProConnex 55919M is the go-to choice for securing 14/2 and 12/2 AC and MC cables. The inner diameter of 0.492 inches is precisely sized to grip pre-filled 12-gauge flexible metallic conduit without being loose. Zinc-plated alloy steel construction provides the durability needed for permanent installations in dry locations.
User feedback is nearly universal in praise of the snug fit. Reviewers note that 1/2-inch straps are too loose for this cable type, while the 3/8-inch Sigma strap holds firmly with no wiggle when fastened. The strap accepts #8 screws, and the mounting hole may accommodate slightly larger hardware if needed. The 100-pack is a contractor-friendly quantity that eliminates the need to restock mid-job.
Because it’s a one-hole design, it doesn’t offer the same rotational resistance as a two-hole strap. For applications where the cable might be subject to lateral force, using two straps in close proximity is a smart workaround. The gray finish is utilitarian but blends well with most electrical boxes.
Why it’s great
- Precise 0.492-inch inner diameter for snug MC cable fit
- 100-count pack offers exceptional per-unit value
- Sturdy zinc-plated steel holds without deforming
Good to know
- Single-hole design provides less anti-rotation stability
- Intended for dry locations only
5. Soimuk 30-Pack Plastic Pipe Clamps 3/4-Inch
For non-conductive plumbing and low-voltage pipe runs, the Soimuk PVC clamps are a lightweight, corrosion-proof alternative to metal straps. The snap-fit design allows the clamp to be pushed onto the pipe before screwing it down — a real advantage when working overhead, as it keeps the pipe in place while you drive the screws. The kit includes 60 stainless steel M4 screws, eliminating the need to source fasteners separately.
Users have successfully used these clamps for building netting frames for grapevines, mounting PEX tubing under docks, and replacing broken J-hooks on hot water lines. The plastic is durable enough to hold without cracking under normal tension, and the non-conductive property adds safety around electrical systems. The white color blends cleanly against most walls and ceilings.
These are not suitable for heavy EMT or metal conduit runs where load-bearing is critical. The plastic can become brittle in extreme cold, and the snap-fit tabs may break if the pipe is significantly oversized. Pre-drilling holes is recommended when mounting to concrete or tile to prevent screw breakage.
Why it’s great
- Snap-fit design holds pipe in place during installation
- Comes with screws, saving an extra purchase
- Non-conductive PVC adds electrical safety
Good to know
- Not load-rated for heavy EMT conduit
- Plastic can become brittle in freezing temperatures
6. Belts.com 100% Full Grain Leather Belt Strap (1-1/2-Inch)
Shifting from conduit to craft, the Belts.com leather strap is a fantastic blank for anyone making belts, harnesses, or heavy-duty cuffs. The 100% full-grain leather is thick and stiff right out of the package, with a matte brown finish and burnished edges that show quality craftsmanship. It measures 1-7/16 inches actual width, slightly narrower than the stated 1.5 inches, but that’s standard for leather goods.
Users consistently praise the leather’s density and the sturdy stitching, noting it softens nicely with use without losing structure. The strap is compatible with standard belt buckles, and the length is generous enough to accommodate larger waist sizes. It’s been used for service dog harness repairs and DIY belt remakes with excellent results.
The color can run darker than the listing photos suggest — one buyer noted the brown was nearly black. The stiff leather requires some breaking in and may be challenging to work with for those new to leathercraft. It’s not a structural strap for any electrical or plumbing application; this is purely a craft and fashion item.
Why it’s great
- Genuine full-grain leather with tight grain and burnished edges
- Thick enough for heavy-duty belt projects
- Softens with wear while maintaining shape
Good to know
- Color may be darker than product images suggest
- Stiff initially; requires break-in period
7. VA Lipskii Leather Full-Grain Leather Strap Strip (2-Inch Wide)
When your project needs a wider leather blank, the VA Lipskii strap offers 2 inches of full-grain leather — a less common width that suits wide belts, dog harness repairs, and custom cuffs. At 51 inches long, it provides enough material for multiple smaller projects or one generous belt. The natural front surface retains the hide’s character, with slight grain variations that add to the handmade aesthetic.
Buyers describe the leather as stiff and thick, but note that it softens beautifully with regular use. It’s been used to remake failing ladies’ belts, replace straps on service dog harnesses, and create well-made cuffs. The thickness is consistent throughout the strip, and the color is uniform with no blotchy patches.
The strap does not come pre-punched with holes, so you’ll need a rotary punch or an awl to create buckle holes and stitching channels. As with any natural leather, the thickness can vary between batches, and the strap may require conditioning if stored for long periods. This is not a structural strap for any load-bearing applications.
Why it’s great
- Full-grain leather with natural surface character
- 2-inch width accommodates larger projects
- Long 51-inch length offers flexibility for multiple uses
Good to know
- No pre-punched holes; requires tools for customization
- Thickness may vary between batches
FAQ
What is the difference between a one-hole and a two-hole strap?
Can I use a plastic PVC strap for metal EMT conduit?
Why does my 3/4-inch strap feel loose on my 3/4-inch pipe?
Final Thoughts: The Verdict
For most users, the 2-hole strap winner is the Halex 1 in. EMT Strap because its UL/CSA listing, sturdy zinc-plated steel, and snap-on design offer the best balance of code compliance and installation ease for standard electrical work. If you need a larger diameter strap for 1.25-inch conduit, grab the Airmont 1-1/4-Inch Strap with its reinforced rib. And for lightweight, non-conductive pipe runs, nothing beats the Soimuk Plastic Clips for their snap-fit convenience and included screws.