Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The wrong pair of 2″ spacers can turn a weekend upgrade into a wobbly, unsafe gamble with your wheels. You need a solid aluminum block that stays tight and actually grips your truck or ATV’s hub — not a loose part that lets your tire wiggle at highway speed. Here are the six kits that deliver real grip and which ones to avoid cutting corners with.
I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you drive a Ford F-150, a Chevy Silverado, a Jeep Wrangler, or a Honda ATV, these six kits represent the most reliable 2″ spacers you can install today, each matched to its specific bolt pattern and real-world use case.
Our Picks at a Glance


How To Choose The Best 2″ Spacers
A wheel spacer is a thick ring of aluminum that bolts to your vehicle’s hub, and then your wheel bolts to the spacer — pushing the wheel outward by two inches. This gives you room for bigger tires, fixes brake caliper clearance problems, and changes the stance of your truck or ATV. But the wrong choice brings vibrations, loose lug nuts, or even a wheel that separates on the road.
Bolt Pattern and Center Bore — the non-negotiable first check
Your vehicle has a specific number of lugs (four, five, or six) and a spacing in millimeters (like 6×135 or 5×4.5). The spacer must match exactly. The center bore — the hole in the middle of the spacer — must match your vehicle’s hub diameter. A hub-centric spacer (one where the center bore fits snugly over the hub) centers the wheel on the metal hub, not on the lug nuts. This eliminates wobble and is much safer than a lug-centric design that relies on the nuts to center the wheel.
Material and stud grade — strength matters under load
Every reputable spacer here is made from forged 6061-T6 aluminum. Forging aligns the metal’s grain, making the part stronger and less likely to crack under stress compared to cheaper cast aluminum. The studs that bolt the spacer to your hub should be Grade 10.9 — a hardened steel rating that handles high clamping forces without snapping. Budget spacers sometimes use weaker 8.8-grade studs, which increases the risk of failure.
Quick Comparison
| Model | Best For | Bolt Pattern | Hub Bore | Stud Thread | Amazon |
|---|---|---|---|---|---|
| KSP PERFORMANCE 6×135★ Best Overall | F-150 / Expedition perfect fit | 6x135mm | 87.1mm | M14x2 | Amazon |
| dynofit 6×135 Hub-CentricPremium Pick | Late-model F-150 vibration-free | 6x135mm | 87.1mm | M14x1.5 | Amazon |
| Rough Country 1101RED | Chevy/GMC 1500 trucks | 6×5.5″ | 3.08″ | M14x1.5 | Amazon |
| Rough Country 1101 | GM SUV/Truck broad fit | 6×5.5″ | 3.08″ | M14x1.5 | Amazon |
| Dynofit 5×4.5 | Jeep / Mustang / Ranger | 5×4.5″ (5×114.3mm) | 80.5mm | 1/2″-20 | Amazon |
| GAsupply 4×110 | ATV / UTV budget upgrade | 4x110mm | 74mm | 10×1.25 | Amazon |
In‑Depth Reviews
1. KSP PERFORMANCE 6×135 Wheel Spacers (4 PCS)
Our pick — over 4.5★ from 950+ verified ratings; the strongest balance of quality and price.
Four forged blocks that bolt your F-150’s wheels steady without any wobble.
This KSP kit gives you a full set of four 2″ spacers right from the start — matched to the 6x135mm bolt pattern (six lugs on a 135mm circle) found on 2004-2014 F-150s and 2003-2014 Expeditions and Navigators. The hub bore is 87.1mm, so the spacer centers itself on the axle hub instead of relying on the lug nuts to hold everything straight. Made from forged 6061-T6 aluminum billet, the build is lighter than a cast part but denser and stronger. Buyers report the machining is precise enough that they feel “zero vibration” even after hundreds of miles. The kit uses hardened 10.9 grade geomet bolts with thread locker (a coating that stops them from loosening) pre-applied, so the risk of bolts backing out is reduced from the first install.
At 19.39 pounds for the set, these are noticeably heavier than the ATV spacers below (which weigh 6.34 pounds for two), but that weight comes from thicker, full-coverage aluminum across four pieces. The recommended torque range is 85-95 FT/LBS, and owners mention that checking them after 500 miles shows the torque holding steady. One owner with a 2021 F-150 V8 installed 2.5″ spacers from the same brand and praised the “easy install, affordable, great quality.” Compared to the dynofit 6×135 set below, this KSP kit covers the older 2004-2014 F-150s and uses M14x2 studs, while the dynofit fits 2015+ models with M14x1.5 studs.
What locks it in
- Four spacers included — enough for both axles on most trucks
- Forged 6061-T6 aluminum resists cracking better than cast alloys
- Pre-installed 10.9 grade geomet bolts with thread locker
Watch for
- Does not fit F-150 HD or models with a dual rear wheel setup
- Vehicle fit is generation-specific (2004-2014) — double-check your year
Reach for this if: you drive a 2004-2014 F-150 or Expedition and want a full four-piece set that fits the hub tight from the start.
Look elsewhere if: your truck is a 2015 or newer F-150 — the bolt pattern is the same but the hub bore specs shift, and the dynofit set below is designed for that generation.
2. dynofit 2 Inch 6×135 Hub-Centric Wheel Spacers (4 Pcs)
Genuine hub-centric design for 2015-2026 F-150s that kills wheel vibration.
This set is built specifically for the 2015-2026 Ford F-150 (excluding 2021+ Raptor), Expedition, and Lincoln Navigator — all with a 6x135mm bolt pattern and an 87.1mm center bore. The key difference from lug-centric spacers is that the dynofit’s precision-machined bore fits over your axle hub like the factory wheel does, so the vehicle’s weight sits on the metal hub, not the studs. Reviewers confirm this eliminates the “wobble at highway speed” that plagues cheaper designs. The forged 6061-T6 aluminum body resists fracture better than cast parts, and the Grade 10.9 Dacromet studs (a corrosion-resistant coated steel stud) are designed to deform under extreme force rather than snap — a safety feature that cheaper kits lack.
Weighing 18 pounds for the four-piece set, compared to the KSP set above at 19.39 pounds, yet they hold the same 2-inch thickness and 87.1mm bore. One detailed buyer review noted that the spacers are actually branded with “KSP” on the bottom, suggesting a shared premium manufacturing source, but the dynofit kit uses M14x1.5 studs (versus the KSP’s M14x2) and covers the newer 2015+ model years. The recommended torque spec is 85-95 foot-pounds, which one reviewer pointed out is lower than the factory 150 foot-pounds, but they confirmed torquing to 90 foot-pounds with the provided thread locker kept everything tight.
What makes it premium
- True hub-centric fit — centers on the hub, not the lugs, for zero wobble
- Forged 6061-T6 aluminum with Grade 10.9 Dacromet studs
- Covers 2015-2026 model years (F-150, Expedition, Navigator)
Study the fit
- Does not fit 2021+ Raptor models
- Some buyers prefer the factory 150 ft-lb torque spec over the recommended 85-95 ft-lbs
Best for tight highway driving: if you own a 2015 or newer F-150 and want the safest, most vibration-free hub-centric fit for daily driving.
skip it if: your truck is a 2004-2014 F-150 — the KSP set above is a better fit for that generation.
3. Rough Country 2″ Wheel Spacer 1101RED (Pair)
A red pair that gives your Chevy or GMC 1500 the wide stance for less.
Sold as a pair, this Rough Country spacer fits 88-21 Chevy Silverado and GMC Sierra 1500 trucks with a 6×5.5″ bolt pattern (six lugs on a 5.5-inch circle). The 6061-T6 aluminum construction provides maximum hardening and tensile strength, and the red anodized finish adds corrosion resistance and a visual pop behind the wheel. Installed weight is 13.15 pounds for the pair, and the studs come preinstalled — an estimated install time of one hour. Customers note the red finish looks great on an AT4 and gives the truck a stance that “looked 100x’s better.”
The catch is that this is a two-piece set — you need to order two pairs for all four corners. Some reviewers also note these are not true hub-centric spacers; they fit the bolt pattern but the center bore does not snugly grab the hub, which on some vehicles can cause minor vibrations. One owner mentioned they “fit and work well, should be hubcentric.” Rough Country backs these with a lifetime replacement warranty.
Value highlights
- Lifetime replacement warranty from Rough Country
- Red anodized finish adds style and corrosion resistance
- Pre-installed studs for a quicker install
Know before buying
- Sold as a pair — you need two sets for all four wheels
- Not hub-centric; some users report fitment is “alright” not perfect
Grab these for: a budget-friendly two-piece upgrade for a Chevy or GMC 1500’s rear axle, especially if you like the red accent.
Pass if: you are looking for a full four-piece hub-centric kit — the Rough Country 1101 below or the KSP set above serves that better.
4. Rough Country 2″ Wheel Spacer 1101 (fits GM 1500/SUV)
A proven two-inch spacer for Silverados, Tahoes, and Suburbans that buyers have trusted for years.
Rough Country’s model 1101 is the non-red version of the spacer above, designed for a wider range of GM vehicles: 88-20 Chevy Silverado and GMC Sierra 1500, plus 92-20 Tahoe, Yukon, and Suburban. The bolt pattern is 6×5.5″ (also written as 6×139.7mm), with a 3.08″ center bore and M14x1.5 thread pitch. It is precision-machined from 6061-T6 aluminum with preinstalled studs and a corrosion-resistant finish. Sold as a pair, the spacers weigh 13.15 pounds and measure 10 x 8 x 8 inches per pair. One buyer with a 2005 Silverado 1500 reported using these for over two years “without a single problem” after installing them to match the rear wheel offset to the lifted front end.
Unlike the red 1101RED variant, this model uses a machined silver finish that blends with most factory wheels. Reviewers emphasize the importance of retorquing after 100 miles — one owner wrote “Remember to retorque after 100 miles then you’re all set.” The fit is vehicle-specific, meaning the spacer is made to match the GM 1500 hub geometry rather than being a universal part. A buyer noted it “took 20 minutes to install with power tools and a good jack.”
Why it works
- Vehicle-specific fit for GM 1500 trucks and full-size SUVs (88-20)
- Lifetime replacement warranty included
- Proven track record — one buyer went 2+ years with no issues
One thing to know
- Sold as a pair — budget for two pairs if you need all four corners
Choose this if: you need a vehicle-specific, warranty-backed pair for a Chevy/GMC 1500 or GM full-size SUV and want a proven, long-serving part.
Look elsewhere if: you want a full set of four spacers for both axles — you’ll need to buy two pairs to cover all four wheels.
5. Dynofit 2 inch 5×4.5 Wheel Spacers
The forged spacer that bridges Jeeps and Ford cars with a 5×4.5-inch bolt circle.
If your vehicle uses a 5×4.5 inch (5×114.3mm) bolt pattern and an 80.5mm hub bore, this spacer from Dynofit covers a broad range: Jeep Cherokee XJ, KJ, KK (1984-2013), Wrangler TJ (1997-2006), Grand Cherokee ZJ (1992-1998), plus Ford Mustang (2005-2014), Ranger (1982-2012), Explorer (1990-2018), and several others. The thickness is exactly 2 inches (50.8mm), the stud thread pitch is 1/2″-20, and the recommended torque is 75-85 FT/LBS. The kit includes 20 lug nuts and is made from forged 6061-T6 aluminum with Grade 10.9 Dacromet studs — the same safety-focused design as the premium Dynofit truck spacers above.
Weighing 13.5 pounds for the pair, these are engineered for light trucks and SUVs but also fit sedans like the Ford Taurus and Crown Victoria. Reviewers highlight that the spacers held perfectly on an off-road trailer hauling gear for 600 miles, and another owner called them “very well made” for giving a Jeep the stance it needed. One caution from buyers: “a lot of people putting these on the wrong way have issues” — the spacer has a correct orientation (the studs face outward toward the wheel), and installing it backward can cause fitment problems.
Strengths
- Wide vehicle compatibility (Jeep, Ford, plus several sedans)
- Forged 6061-T6 with Grade 10.9 Dacromet studs for safety
- Includes 20 lug nuts — no separate purchase needed
Orientation matters
- Must be installed with the studs facing outward — improper install causes problems
Perfect for: Jeep Wrangler TJ or Cherokee XJ owners who want a forged, safety-tested spacer that also fits Ford Rangers and Mustangs.
Not for: 2014+ Jeep Cherokee models with a different bolt pattern — verify your year.
6. GAsupply ATV 4×110 Wheel Spacers 2 inch (2 Pack)
A lightweight two-piece ATV kit that pushes your Honda or Yamaha’s wheels out for stability.
Built for ATVs and UTVs with a 4x110mm bolt pattern, 74mm hub bore, and M10x1.25 wheel studs, this two-pack spacer set from GAsupply is the lightest option here at 6.34 pounds for the pair — compare that to the KSP F-150 set at 19.39 pounds for four pieces, which makes sense given the smaller scale and quantity. The spacers are CNC-machined from 6061-T6 aluminum billet and use 12.9 grade bolts (one grade higher than the 10.9 used in the truck spacers above). The 2-inch thickness (50mm) adds tire clearance and gives the ATV a wider, more aggressive stance. Buyers confirm it fits a Honda Rancher perfectly, solving brake drum clearance issues, and one owner called them “a must buy” for a Yamaha Grizzly 700, praising the extra stability.
The honest catch involves the supplied lug nuts. One buyer explicitly warned: “The supplied nuts will get ya in an accident. Not enough bite on the studs.” They recommend ordering Tusk extended shank lug nuts instead. Another reviewer used these on a Polaris RZR 170 and noted that 2 inches may have been a bit wide for that model but the spacers worked. If you are handy with pressing studs into the hub, you can upgrade the hardware for better thread engagement. The machining quality is solid — one buyer described the fit as “bolts right up very nice machining.”
What you get
- Light 6.34-lb pair — ideal for ATVs where weight matters
- CNC-machined 6061-T6 aluminum with 12.9 grade bolts
- Fits Honda Rancher, Yamaha Grizzly, and other 4×110 ATVs
The hardware catch
- Supplied lug nuts lack thread bite — upgrade to extended shank nuts for safety
- Only fits 10×1.25 studs, not 12×1.25
Best for: ATV owners who want a budget-friendly 2-inch wider stance and are willing to swap the included lug nuts for better ones.
pass on it if: you want a plug-and-play kit with no hardware concerns — look for a set that includes longer, hub-centric nuts.
Understanding the Specs
Bolt Pattern (PCD)
This is the number of lug holes and the diameter of the circle they form, measured in millimeters or inches. If your truck has six lugs on a 135mm circle, you need a 6×135 spacer. An ATV with four lugs on a 110mm circle needs a 4×110. Matching this number is the hard requirement — the wrong pattern simply will not bolt on.
Hub Bore / Hub-Centric Fit
The center hole of the spacer must match your vehicle’s axle hub diameter. A snug fit means the wheel’s weight rests on the metal hub (hub-centric), not on the lug nuts (lug-centric). Hub-centric fit eliminates the wobble that happens when the nuts alone try to center the wheel. For example, a 87.1mm bore spacer on an F-150 fits over the factory hub like the original wheel does, making highway driving smoother and safer.
FAQ
Will 2 inch spacers fit my stock wheels?
Are hub-centric spacers better than lug-centric?
Can I put 2 inch spacers on only the rear wheels?
How do I know my bolt pattern and hub bore size?
Do I need longer lug nuts for 2 inch spacers?
What torque should I use on spacer studs and wheel nuts?
Will 2 inch spacers cause my tires to rub?
How long do wheel spacers last?
Final Thoughts: The Verdict
The KSP PERFORMANCE 6×135 set gets the top spot because it delivers four forged hub-centric spacers with pre-installed Grade 10.9 studs at a price that undercuts the dynofit — a complete bolt-on solution for 2004-2014 F-150s and Expeditions. If you drive a 2015 or newer Ford half-ton, the dynofit 6×135 Hub-Centric set offers the best vibration-free hub-centric fit for that generation. And for ATV owners, the GAsupply 4×110 spacers give you a lightweight forged pair at a budget-friendly price — just plan on swapping the supplied lug nuts for longer ones.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.




