If you are driving a 2013-2016 Ford Fusion at night, the original halogen headlights are likely dimmer than they were from the factory, suffering from hazy polycarbonate lenses and tired reflectors that scatter light rather than projecting a clean, focused beam. Replacing the entire headlight assembly restores full nighttime visibility, eliminates moisture ingress, and can even upgrade the front-end aesthetics of your sedan.
I’m Min — the co-founder and writer behind Gadgets Feed. This guide is built on cross-referencing hundreds of buyer reviews, OEM part numbers, and real-world fitment reports for the Fusion’s projector housing, reflector geometry, and halogen bulb compatibility across model years 2013, 2014, 2015, and 2016.
A direct bolt-on replacement like one of the options in our curated list of the best 2016 ford fusion headlights restores factory beam patterns without requiring modifications or wiring harness adapters.
How To Choose The Best 2016 Ford Fusion Headlights
The Fusion’s front-end lighting system is vehicle-specific: housings, mounting brackets, and electrical connectors differ between the 2010-2012 generation and the 2013-2016 generation, and even within the 2013-2016 range you must verify you have the standard halogen system before ordering. The three decisions below will steer you toward the correct assembly.
Confirm Halogen vs. HID Compatibility
The 2013-2016 Ford Fusion came standard with halogen projector headlights. A factory HID (Xenon) system was optional on higher trims and uses a different housing, ballast, and bulb base. Many aftermarket assemblies are designed exclusively for the halogen version. Installing a halogen-specific housing on an HID-equipped car will result in a poor beam pattern and may fail to mount correctly. Check your current bulb type before ordering.
Bulb Replaceability and Size
Most OE-style replacement housings for this generation use H7 bulbs for the high beam and H11 bulbs for the low beam, but a few budget units integrate non-replaceable bulbs directly into the housing. If you prefer the ability to swap in LED or high-performance halogen bulbs later, choose an assembly that accepts standard H7 and H11 sockets. Non-replaceable bulb housings offer a lower upfront cost but force an entire unit replacement when the bulb fails.
Sealing and Lens Material
Moisture intrusion is the most common failure point in aftermarket headlights. Look for housings with fully sealed silicone gaskets, one-way vent valves, and polycarbonate lenses that resist UV yellowing. An IP65 waterproof rating indicates a tight seal against rain and car washes, while DOT and SAE stamps confirm the lens meets legal beam pattern requirements in the US and Canada.
Quick Comparison
On smaller screens, swipe sideways to see the full table.
| Model | Category | Best For | Key Spec | Amazon |
|---|---|---|---|---|
| ACANII LED DRL Switchback | Premium | Full LED upgrade style | LED DRL with sequential turn signal | Amazon |
| AKKON LED Strip Projector | Styling | 2010-2012 Fusion LED accent | LED daytime running lamp strip | Amazon |
| JSBOYAT Black/Clear Pair | Mid-Range | Matched pair, black housing | IP65 sealed, pair set | Amazon |
| SOCKIR OE Chrome Pair | Mid-Range | Balanced value, chrome look | One-way moisture vents | Amazon |
| FIONE Driver Side LH | Single Replacement | Replacing one damaged unit | SAE/DOT, includes bulbs | Amazon |
| LBRST Passenger Side | Budget Single | Passenger side only replacement | OEM-grade polycarbonate lens | Amazon |
| JSBOYAT Chrome Single LH | Budget Single | Entry-level left side fix | Chrome housing, halogen | Amazon |
In‑Depth Reviews
1. ACANII LED Switchback DRL Projector Headlights
The ACANII set is the most feature-dense option for 2013-2016 Fusion owners who want a genuine aesthetic modernization. It uses a full LED switchback daytime running light that pulses white and switches to amber turn signal, plus a crisp projector beam for the low and high functions. The housings are DOT and SAE stamped, meaning the beam pattern is legal for US roads without additional modification.
Installation is plug-and-play for the main connector, though several owners note that the low/high beam wires may arrive reversed and require swapping the pins in the harness — a five-minute fix. The LED DRL stays on with the parking lights, and the sequential turn signal effect is a clear visual upgrade over the factory bulb. The black housing background gives the Fusion a more aggressive front-end character.
One trade-off: the factory H11 and H7 bulb sockets are not included, so you must supply your own halogen or LED bulbs for the low and high beams. The polycarbonate lens is clear and well-sealed, and the 25-pound shipping weight reflects the robust housing build. If you want a modern LED presence without switching to a full retrofit, this pair delivers the best visual return.
Why it’s great
- LED switchback DRL with sequential turn signal for a premium car look
- DOT and SAE certified for legal beam pattern compliance
- Plug-and-play housing with clear polycarbonate lenses
Good to know
- Low and high beam wires may need swapping during installation
- Bulbs are not included — must buy H7 / H1 separately
2. AKKON LED Strip Projector Headlights
The AKKON set is the go-to choice for owners of the 2010-2012 Fusion generation who want projector housings with an integrated LED daytime running lamp. Unlike the 2013-2016 models, the earlier Fusion uses a different hood profile and grille design, and these housings are shaped to match those specific sheet metal lines. The projector low beam creates a sharp cutoff that reduces glare for oncoming traffic.
The LED strip serves as a DRL that stays illuminated whenever the headlights are off, giving the car a modern signature. Buyers consistently report that the light output is significantly brighter than the factory reflector housing, and the installation is straightforward for a novice with basic hand tools. The housing uses H1 bulbs for both low and high beams, which are not included.
One detail to watch: the rear dust covers are tight, making bulb swaps slightly more tedious than on the 2013-2016 units. The sequential turn signal function described in some listings depends on your vehicle’s wiring, and the LED DRL may remain on with the parking lights in auto mode. For the price of a single OEM housing, you get a full pair with an LED accent that transforms the front end.
Why it’s great
- Integrated LED DRL strip provides a noticeable daytime signature
- Projector lens produces a clean cutoff with minimal glare
- Full pair costs less than one OEM replacement housing
Good to know
- Fits 2010-2012 only — not compatible with 2013-2016 Fusion
- Rear dust caps are tight, making bulb changes more difficult
3. JSBOYAT Projector Headlight Pair (Black Housing)
The JSBOYAT black-housing pair is the smartest mid-range buy for 2013-2016 Fusion owners who want a complete left-and-right replacement without the premium price tag of LED-integrated units. The housing is made from OEM-grade polycarbonate with an IP65 waterproof seal, which keeps moisture out far better than many budget singles. The clear lens and black interior give the car a slightly sportier appearance than the factory chrome.
Internally, the projector uses metal parabolic reflectors for the low beam and a separate reflector for the high beam. The low beam accepts an H11 bulb, the high beam takes an H7, and the turn signal uses a PWY24W socket — all standard sizes that let you upgrade to LED bulbs later. The side marker light (W5W) is included, so you only need to supply the main bulbs.
Customer feedback shows consistent five-star ratings for fitment and brightness. The units bolt directly into the factory mounting points without modification. The only caution is that the manufacturer warranty is 3 months, and no installation guide is included — a professional install is recommended if you are not comfortable removing the front bumper fascia and headlight retaining bolts.
Why it’s great
- Full pair in one box for a matched left/right appearance
- IP65 weather sealing prevents fogging and moisture damage
- Standard H7 and H11 sockets allow future LED bulb upgrades
Good to know
- No installation guide included in the box
- Warranty period is only 3 months
4. SOCKIR OE Style Projector Headlight Pair
The SOCKIR pair is the price-to-performance champion for buyers who want a factory-matching chrome look with amber reflectors rather than the murdered-out black housing style. The chrome reflector design is difficult to distinguish from the original Ford housing, making it an ideal candidate for owners who want to restore the OEM appearance without paying dealer prices for genuine parts.
The housing uses a fully sealed silicone gasket and one-way moisture vents that allow trapped humidity to escape without letting water enter — a smart engineering detail that prevents the internal fogging that plagues lesser assemblies. The metal parabolic reflectors produce a wider, smoother low-beam pattern than many competitors at this price tier. The fitment covers the halogen version of the 2013-2016 Fusion only.
A few buyers noted a broken plastic alignment tab on arrival, though this appears to be a packaging issue rather than a design flaw. The lack of installation instructions is consistent with most aftermarket housings. If you want a straightforward OE-style replacement that costs a fraction of two dealer-sourced assemblies, the SOCKIR pair is the most logical choice.
Why it’s great
- One-way moisture vents reduce internal condensation buildup
- Chrome housing with amber reflector matches stock Fusion look
- Metal parabolic reflectors provide wider low-beam coverage
Good to know
- Some units arrive with a broken alignment tab from shipping
- Installation instructions are not included
5. FIONE Driver Side Headlight Assembly
The FIONE driver-side unit is the best single-side replacement option for 2013-2016 Fusion owners who only need to replace a damaged left headlight. It ships with the low-beam and high-beam bulbs pre-installed, saving you from buying H7 and H11 bulbs separately. The housing is SAE and DOT certified, so the beam pattern is legal and the lens resists UV yellowing.
A critical caveat: multiple reviews confirm that the supplied bulbs are non-replaceable — they are permanently integrated into the housing. If one of those bulbs fails, you must replace the entire assembly rather than just swapping a bulb. For some owners this is acceptable if the housing lasts as long as the original (150,000+ miles), but it eliminates the option of upgrading to LED bulbs later.
The black housing with clear lens gives the Fusion a slightly darker appearance than the chrome factory unit. Installation is straightforward with direct bolt-on fitment, but professional adjustment is recommended to align the beam pattern correctly. If you need a quick driver-side fix and plan to keep the car for the medium term, this is the most convenient single-side buy.
Why it’s great
- Bulbs come pre-installed — no separate purchase needed
- SAE and DOT certified for legal beam pattern compliance
- Direct bolt-on fitment for simple replacement
Good to know
- Bulbs are non-replaceable — full housing must be replaced if they fail
- Some users report low beam lifespan of only 8 months
6. LBRST Passenger Side Headlight Assembly
The LBRST passenger-side assembly is the entry-level route for Fusion owners who need to replace a damaged or foggy right headlight on a tight budget. It features an OEM-grade polycarbonate lens that resists yellowing better than raw plastic, and the back shell is designed for impact strength and heat stability. The clear lens with amber reflector closely matches the factory look.
Reviewers consistently rate the fitment as perfect, noting that the unit refreshes a ten-year-old car’s front-end appearance. The housing uses standard halogen bulbs, but the listing does not include them — you will need to supply your own H7 and H11 bulbs. The sealed design is checked before shipping, reducing the chance of moisture ingress out of the box.
The main limitation is that this is a single-side purchase, so if both headlights are degraded, you will need to buy two units separately. The manufacturer provides no warranty, so any defect must be caught immediately upon delivery. For a quick right-side replacement without overspending, this unit gets the job done with solid basic performance.
Why it’s great
- OEM-grade polycarbonate lens resists yellowing and cracking
- Sealed housing is tested before shipping to prevent moisture issues
- Direct bolt-on fitment with no modifications needed
Good to know
- Bulbs are not included — requires separate purchase of H7 and H11
- No manufacturer warranty is provided
7. JSBOYAT OE Style Chrome Single LH
The JSBOYAT chrome driver-side assembly offers the lowest entry point for Fusion owners who need a single left headlight replacement. Despite its budget positioning, it uses the same IP65-sealed polycarbonate construction as the brand’s higher-tier pair, so moisture protection is not compromised. The chrome housing with clear lens replicates the factory Ford finish accurately.
The internal layout mirrors the OE design: H11 for low beam, H7 for high beam, PWY24W for the turn signal, and a W5W side marker that is included in the box. The micro-prism reflectors in the chrome housing increase light reflectivity, which helps oncoming drivers see the vehicle sooner at night. The unit is SAE and DOT certified, meeting legal standards.
Buyers report a perfect fit on 2013-2016 models, with several noting that the light gives the car a more aggressive look compared to the original faded housing. The main trade-off is the 3-month warranty, which is shorter than some competitors. If you need to replace a single left-side headlight on a strict budget and accept that the right side may remain mismatched, this is the most cost-effective pick.
Why it’s great
- IP65 waterproof rating at a budget price point
- SAE and DOT certified for legal beam pattern
- Side marker bulb is included in the package
Good to know
- Warranty is only 3 months — shorter than some alternatives
- Single side only — pair must be purchased as two separate units
FAQ
Will any 2013-2016 Fusion headlight fit my Fusion Hybrid or Fusion Energi?
Can I install LED bulbs in these aftermarket halogen housings?
What does the DOT stamp on a headlight mean?
Final Thoughts: The Verdict
For most users, the best 2016 ford fusion headlights winner is the ACANII LED Switchback Pair because it delivers the most dramatic visual upgrade with integrated LED DRL, sequential turn signals, and a clean projector beam in one package. If you want a factory-matching chrome look at a lower cost, grab the SOCKIR OE Style Pair. And for a matched set with modern black housing and standard H7/H11 sockets, nothing beats the JSBOYAT Black Housing Pair.