Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
The moment a standard twist bit touches acrylic, the material usually cracks, chips, or melts into a milky mess. That is the real problem this guide solves — matching the right bit geometry to a material that punishes ordinary drill bits. You will learn which tip shapes, coatings, and shank types actually spare your workpiece, so your holes come out clean on the first pass instead of on the fourth.
I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
From single-purpose plastic bits to versatile brad-point sets, here is a curated lineup of the best acrylic drill bits that keep cracks away and edges sharp for your next project.
Our Picks at a Glance



How To Choose The Best Acrylic Drill Bits
Acrylic is brittle and melts under friction, so the right bit is about geometry more than raw power. You want a tip that starts cutting immediately and flutes that clear chips fast, so heat never builds up to the cracking point.
Tip shape is the whole game
A pointed spur (a small needle-like center) grabs the surface instantly and stops the bit from wandering across your workpiece. Brad-point bits use this design, and it is why they slice into plastic without skating or shattering the edge.
Cutting angle decides the finish
Bits ground for plastics run at lower point angles, often around 60 to 90 degrees, which shears the material rather than pushing through it. In contrast, a 135-degree split point is built for metal and tends to catch or chip acrylic — a wrong-geometry bit is the most common cause of cracked sheets.
Quick Comparison
| Model | Best For | Tip Style | Material | Size Range | Amazon |
|---|---|---|---|---|---|
| Fisch 8-Pc Brad Point Set★ Best Overall | Wood + acrylic versatility | Brad Point | Chrome Vanadium Steel | 3mm – 10mm | Amazon |
| Amana Tool HSS1524Premium Pick | Clean acrylic & polycarbonate holes | Plastic-Specific | High Speed Steel | 1/4 inch | Amazon |
| Fisch 25-Pc Metric SetPro Grade | Pro wood + acrylic finishing | Brad Point | Chrome Vanadium Steel | 1mm – 13mm | Amazon |
| SOURCEONE 1/4″ Acrylic Bit | Budget plexiglass drilling | Plastic-Specific | High Speed Steel | 0.25 inches | Amazon |
| ARROWMAX 10-Pc Micro Set | PCB & tiny precision holes | Twist / Mini | Tungsten Carbide | 0.5mm – 2.3mm | Amazon |
| WildBossy 12-Pc Hex Set | Quick-change chuck work | Brad Point | High Carbon Steel | 1/8″ – 1/2″ | Amazon |
| GMTOOLS 230-Pc Set | Contractor variety pack | Screw Point | HSS Titanium Coated | 1/16″ – 3/8″ | Amazon |
| COMOWARE 60-Pc Number Set | Wire-gauge precision range | Split Point | HSS M2 | #1 – #60 | Amazon |
In‑Depth Reviews
1. Fisch Brad Point Drill Bit Set — 8 Pcs (3mm – 10mm)
Our pick — over 4.5★ from 700+ verified ratings; the strongest balance of quality and price.
The two-material trouper that cuts acrylic mirrors and hardwoods with one box.
The defining strength here is a beveled cutting edge (a sloped edge that slices into material) paired with a brad-point tip that locks onto the surface instantly. Buyers report it works cleanly on acrylic mirrors and handles hardwoods like maple and oak — one owner logged roughly 75 pen blanks and 170 holes without burning, drifting, or tear-out.
What wins people over is the balance of quality and sharpness; the chrome-vanadium coating keeps the bit cooler so it stays sharp longer, which is exactly what you want when acrylic starts to heat up. The 130-degree cutting angle (the slant of the tip that shears material) is aggressive enough for speed but kind to plastic, and the 2-flute design clears chips as you go.
The trade-off shows up at the top of the range — the 10mm bit can spin a while before it bites, and the plastic storage case is fragile enough that owners treat it gently. That is a small price for a set that performs beyond its price class.
What Owners Love
- Sharp brad-point tip starts holes without wandering
- Chrome-vanadium coating resists heat buildup
- Cuts acrylic mirrors and hardwoods cleanly
Watch Out For
- 10mm bit can be slow to start biting
- Plastic case is fragile in storage
Pick this if: one set must handle both acrylic and demanding hardwoods without swap-outs.
Think twice if: you only drill thick glass-like sheet acrylic all day — a plastic-specialist bit will edge it out.
2. Amana Tool HSS1524 — 1/4″ HSS Plastic Drill 5 Pack
A chisel-tipped specialist that chews through acrylic like soft butter.
This is the bit people reach for when they are done fighting with cheap hardware-store options. The tip acts like a small chisel, shearing acrylic cleanly rather than pushing and cracking it — owners describe holes coming out clean with no chips, even on thin 2mm polycarbonate sheets.
What stands out is how forgiving it is. Owners mention you barely need to think about technique — “just pop it on and sink through” — because the 60-degree cutting angle (a steep, plastic-friendly slant) and 2-flute geometry do the work. Snowglobe tumblers, plexiglass panels, and acrylic sheets all come away uncracked.
The honest limit: you get five bits in one size (1/4 inch), so this is a specialist tool for a specific hole diameter, not a range. If your projects span many sizes, pair it with a brad-point set as backup.
Why It Excels
- Chisel-like tip prevents chipping on acrylic
- No special technique required for clean holes
- Works on thin polycarbonate without cracking
The Catch
- Single 1/4-inch size only, five bits total
- Not a full-range set for varied projects
Best for: acrylic, plexiglass, and polycarbonate work where a clean chip-free hole matters more than size variety.
Not ideal for: jobs needing a wide spread of hole diameters in one box.
3. Fisch 25-Pc Metric Brad Point Set (1mm – 13mm)
A 25-size metric arsenal that luthiers trust for precision without wandering.
This is the set for anyone whose name for a hole is an exact millimeter figure. It spans 1mm to 13mm with a brad-point tip on every bit, so each hole starts exactly where you place it — buyers building classical and flamenco guitars rely on it for that no-walking precision, even in hard cedar heartwood.
The chrome-vanadium coating (a coating that reduces heat so the edge stays sharp longer) and dual spurs cut acrylic glass and hardwoods like oak and maple with fast, smooth action. Owners note the machining is excellent — straight shanks, smooth flutes, sharp lands — and the bits stay true with zero run-out.
Two realities to weigh: the plastic case is flimsy enough that some owners replace it on day two, and occasional reports of bits breaking within minutes of use appear. For the 25-bit coverage and guitar-grade accuracy, most find the price justified.
Standout Strengths
- 25 metric sizes from 1mm to 13mm
- Precision starts with no bit wandering
- Chrome-vanadium coating keeps edges sharp
Known Trade-offs
- Plastic case is cheap and breakable
- A few customers note bits snapping early
Reach for this if: you need exact metric holes in wood, MDF, or acrylic with a professional finish.
Look elsewhere if: you just need one or two common sizes — the 8-piece set covers that for less.
4. WildBossy 12-Pc Brad Point Set — Hex Shank (1/8″ – 1/2″)
Twelve imperial sizes that click into a quick-change chuck and stay sharp.
The first thing you notice is the 1/4-inch hex shank, which locks straight into any quick-change chuck without a key — swap bits mid-project without touching the drill. Owners find the brad-point tip gives precise starting accuracy, and the double cutting edges with wide flutes clear chips fast for smooth holes.
The material list is broad: beech, walnut, elm, fiberboard, plywood, PVC, MDF, acrylic, nylon, and rubber all show up in the compatibility notes. The set covers 1/8 inch up to 1/2 inch, with doubles of the most-used sizes (1/8″, 3/16″, 1/4″) so you always have a spare at hand.
The obvious limitation is length — these are short bits designed for thinner stock and model work, not deep boring. Buyers describe them as extremely sharp and good value for light-duty use.
High Points
- Hex shank works with quick-change chucks
- Wide range of compatible materials including acrylic
- Extra copies of common sizes included
Limits
- Short length suits thin stock only
- Light-duty use rather than heavy production
Perfect for: quick-change projects across wood, plastic, and acrylic where speed matters.
Skip if: you need long bits for deep holes or heavy continuous drilling.
5. SOURCEONE 1/4″ Acrylic Drill Bit — Hand Ground
A hand-ground single bit that cracks the plexiglass problem for under fifteen.
The pitch is simple: a 1/4-inch bit hand ground in the USA specifically to avoid chipping in plastics. Buyers confirm it works — one owner drilled a 1/8-inch plexiglass sheet with no breakage after a regular bit failed, and another produced perfect holes in clamped 1/8-inch material with backing.
The 9E+1 (roughly 90) degree cutting angle leans plastic-friendly, which is why it shears instead of shatters. A straight shank and 2-flute design keep it compatible with any standard chuck, and the single-bit format removes the cost of a full set if acrylic is your only material.
The honesty check: quality and durability draw mixed feedback. Some owners hit a faulty grind with a wrong point angle, so there is a quality-control lottery here. Treat an occasional dud as the budget-tier trade-off.
The Upside
- Hand ground for chipping resistance in plastics
- Proven on 1/8-inch plexiglass without cracking
- Entry-level price for a single specialist bit
The Downside
- Quality control is inconsistent between units
- One size only, no range for bigger holes
Grab this if: the budget is tight and you only need clean 1/4-inch holes in plexiglass now and then.
Pass it by if: you want a reliable multi-size solution — the occasional bad grind makes consistency a gamble.
6. ARROWMAX 10-Pc PCB Micro Drill Bit Set (0.5mm – 2.3mm)
Ten tungsten-carbide micro bits for circuit boards, resin, and jewelry-level detail.
This set is built for the fine end of the scale, where holes are measured in fractions of a millimeter. Each bit is hardened tungsten carbide (a very hard material that holds an edge on abrasive surfaces) with a standard 2.35mm (3/32 inch) straight shank that fits mini drill pens and rotary tools.
The clever bit here is the size-marked rubber collar on each bit, which acts as both a label and a depth stop — it prevents over-penetration and stabilizes the drill path, which reduces the risk of snapping. The ten sizes run 0.5mm, 0.7mm, 0.9mm, 1.1mm, 1.3mm, 1.5mm, 1.7mm, 1.9mm, 2.1mm, and 2.3mm, covering PCB work, acrylic, resin, and delicate plastics.
The fragility is real — reviewers point out bits snapping with surprising ease, even one 1.3mm bit breaking while being twisted by hand. Owners still love the set for small jobs, but treat it as a consumable.
Why It Shines
- Ten micro sizes in one indexed box
- Marked collars act as depth-stop guides
- Tungsten carbide stays sharp on fiberglass
Handle With Care
- Bits are fragile and snap under pressure
- Mini sizes only — no larger holes here
Built for: electronics hobbyists, keyboard modders, and model makers needing burr-free micro holes.
Not for: anyone needing a durable everyday driver — order spares with it.
7. COMOWARE 60-Pc Number Drill Bit Set (#1 – #60)
A 60-size wire-gauge index that rivals a parts-store set at a fraction of the price.
If you work in wire gauges, this set hands you the full ladder from #1 to #60 in one organized case. Shoppers say it looks identical to a name brand parts-store version that costs roughly a hundred more — the black-and-gold coated HSS M2 bits (a high-speed steel grade known for durability) handle metal, wood, acrylic, and plastic.
The 135-degree split point is the metal-drilling geometry here — it prevents walking and cuts without a pilot hole, which is useful on hard materials even if acrylic needs a lighter touch. The indexed holder keeps each bit protected and labeled for quick access.
The recurring gripe is the case: bits can slip under the case shelves during shipping, leading owners to think pieces are missing when they are actually hiding below. Dig around and they are all there, but the case design is the weak link.
Strong Points
- Complete #1 to #60 wire-gauge coverage
- Split point cuts metal without a pilot hole
- Far cheaper than equivalent parts-store sets
Quirks
- Case lets tiny bits shift during shipping
- 135-degree tip is metal-tuned, not acrylic-tuned
Best fit: anyone who needs the full wire-gauge spectrum for mixed metal, wood, and plastic work.
Reconsider if: acrylic is your sole material — the split-point geometry is not tune for it.
8. GMTOOLS 230-Pc Titanium Coated Drill Bit Set
A 230-bit job-site box that keeps every common size in reach on the truck.
The appeal is pure volume — 230 pieces spanning 1/16 inch to 3/8 inch, so a remodeler always has the size they need without a second trip. The bits are made from 4241 high-speed steel with a titanium coating for wear resistance, and the screw-point tip (a self-centering tip that grabs without a pilot hole) helps them start true in mild steel, aluminum, copper, and wood.
Owners who remodel homes buy it twice, praising the variety and the hard storage case that keeps order on the job. The 135-degree cutting angle is the metal-tuned geometry, so it is a generalist, not an acrylic specialist — it will do plastic in a pinch but is not ground to spare fragile sheets.
The honest note: these are treat-as-disposable bits. One buyer advises keeping work glasses on because they are brittle and can snap, and notes they are best for consuming when you do not want to wear out expensive carbide or hardened bits.
What You Get
- 230 bits cover nearly every common size
- Titanium coating improves wear resistance
- Job-site box keeps a full set organized
Keep In Mind
- Bits are brittle and best treated as disposable
- Metal-tuned tip, not ideal for delicate acrylic
Great for: contractors and remodelers who chew through general-purpose bits across metal, wood, and plastic.
Wrong tool for: the acrylic purist — this box is about coverage, not plastic-specific geometry.
Understanding the Specs
Cutting Angle
The cutting angle is the slant of the tip that meets the material. A lower angle, around 60 to 90 degrees, shears plastic cleanly — that is what makes a bit acrylic-friendly. A higher angle like 135 degrees is built for metal and tends to catch or chip acrylic, so match the angle to your material.
Brad Point vs Split Point
A brad-point tip has a small center spur that locks onto the surface so the bit does not wander; it is ideal for wood and acrylic. A split-point tip is ground for metal and self-centers without a pilot hole. For acrylic, the brad point wins because it starts cutting immediately without skidding.
FAQ
Why does my regular drill bit keep cracking acrylic?
Can I use a brad-point bit on acrylic?
What shank size do I need for a mini drill?
How do I stop acrylic from chipping on the exit side?
Are titanium coated bits good for acrylic?
What is the difference between a brad point and a split point?
Are micro drill bits fragile?
Will a wood drill bit set handle acrylic?
Final Thoughts: The Verdict
For most buyers, the acrylic drill bits winner is the Fisch 8-Piece Brad Point Set because it balances sharp acrylic cuts with real hardwood capability in one case. If you want a single plastic-specialist that needs zero technique, grab the Amana Tool 5-Pack. And for micro-scale precision work, the ARROWMAX 10-Piece Micro Set is the one to reach for.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of August 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.





