Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.7 Best Band Saw Fence | Resaw Without a Second Guessing the Cut

Check Price on Amazon

The Woodhaven 7280 stands out because its dual-end locking system clamps the fence at both the front and rear of the table, preventing the fence from pivoting even during aggressive resawing on a 14-inch saw. The separate front and rear locks, plus two independent blade lead locks, give you exceptional rigidity that budget fences simply do not provide. It mounts to most 14-inch saws from Delta, Jet, Ridgid, and Powermatic without drilling, though some models may require four simple holes.

The extruded aluminum fence body is lightweight yet rigid enough to resist flex under heavy feed pressure. The dedicated blade lead adjustment screw lets you compensate for blade drift in seconds, without trial-and-error cuts. The included stop block is a practical addition for repetitive ripping tasks, saving setup time on repeat cuts. The fence’s anodized finish resists rust and corrosion even in humid shop environments.

Made in the USA and backed by a lifetime guarantee, the Woodhaven 7280 is the fence that stays square when it counts. Its plastic lock handles feel slightly less durable than the rest of the construction, and one reviewer reported a handle breaking during assembly. Replacing them with metal handles is a straightforward upgrade for long-term reliability.

Check Price on Amazon

The Grizzly H7587 is a resaw fence system that combines a cast iron fence for normal work with a removable extruded aluminum fence for tall resawing, giving you two fences in one package. The cast iron support bar and fence weigh a combined 16 pounds, providing massive rigidity that clamp-on fences cannot match. It is designed as a kit for Grizzly saws but retrofits easily to many other 14-inch bandsaws with some drilling and tapping.

The tall aluminum fence allows you to lower the blade guides closer to the work for regular cuts, then quickly swap to the tall fence for resawing stock up to 6 inches tall. The anodized aluminum rails resist corrosion, and the cast iron fence provides a dead-flat surface that stays true. Several owners report that the fence was accurate and square straight out of the box, even on non-Grizzly saws like Delta and Jet after minor modifications.

This system excels in workshops that regularly switch between normal bandsaw work and heavy resawing. The included ruler sticker and magnifying marker line are somewhat cheap and may need replacement. This fence does not include detailed installation instructions, so expect to spend time adapting it to your specific saw.

Check Price on Amazon

The CARTER MAGFENCE II solves the universal fit problem with two powerful switchable magnets that attach the fence to any ferrous metal bandsaw table in seconds. The 16-inch long L-shaped aluminum extrusion includes multiple T-slots for featherboards and stops, making it a versatile accessory for saws that lack factory fence mounting holes. The switchable magnets let you engage or disengage the hold with a lever, making repositioning fast and intuitive.

This fence is ideal for older saws with cast iron tables that lack standardized hole patterns, such as the Shopsmith Mark V or vintage Craftsman 12-inch saws. Users report excellent stability for resawing softwoods up to 3.5 inches thick and 36 inches long, though the 16-inch length limits its use for very long stock. The included setup blocks make initial alignment straightforward, and the T-slots accept standard 1/4-inch and 5/16-inch T-bolts.

The magnetic attachment is the standout feature here, but it also means the fence is incompatible with aluminum tables. The two magnets provide sufficient holding force for most tasks, but very aggressive feeds can cause the fence to shift if not aligned properly. The price is higher than many bolt-on fences, reflecting the premium of the universal magnetic system.

Check Price on Amazon

The BOW 46-inch XT XTENDER Fence is an add-on fence extension designed to double the effective fence length of portable, benchtop, and bandsaws, providing a massive 46-inch registration surface for ripping long boards. The 5-inch tall aluminum extrusion gives you vertical support for tall stock during resawing, and the three integrated T-slots let you attach featherboards, stops, and Bow’s proprietary feed support accessories. It attaches to your existing fence using T-track clamps, which are sold separately.

Setting up the 46-inch version on a bandsaw transforms a short stock fence into a system that can handle full-length lumber safely. The milled clamp slots on the back allow multi-position placement — forward for infeed control, back for outfeed, or centered for both. Users consistently report that the fence installs in under 5 minutes and feels rock solid for ripping and resawing, provided you use the correct Bow clamps.

The 46-inch length is ideal for users who regularly cut long boards, but it may be overkill for small shops. The proprietary T-track is narrower than standard, meaning it only accepts Bow-specific T-bolts, limiting third-party accessory compatibility. The fence itself is robust and well-packaged, and the anodized finish resists wear well.

Check Price on Amazon

The BOW 36-inch XT XTENDER Fence is the same robust system as its 46-inch sibling but in a more compact format that better suits portable jobsite saws and smaller bandsaws. Its 36-inch length provides ample registration surface for most common ripping tasks without overwhelming a small table. The fence stands 5 inches tall and includes the same three T-slots, milled clamp slots, and compatibility with Bow Feed Supports.

This version is particularly well-suited for users with limited shop space who still need a fence extension for occasional long cuts. The reduced length makes it easier to store and fit on smaller saw tables while still delivering the same 5-inch vertical support for resawing. Owners of DeWalt 745 and Ridgid TS3650 saws report that the 36-inch version transforms their saw’s capability for ripping 2x materials with significantly improved stability and safety.

Like the 46-inch version, the T-track is proprietary to Bow accessories, meaning standard T-bolts from other brands won’t fit. The fence is well-made with a heavy, solid feel, and the packaging is excellent. If you don’t need the extra length of the 46-inch version, the 36-inch offers the same quality at a lower entry point.

Check Price on Amazon

The Yoursme KMS7200 is a direct replacement for the Kreg KMS7200 fence system, offering the same T-slot design and Precision Lens Cursor at a significantly lower cost. The fence is built from aluminum with a powder-coated finish that resists rust, and it includes T-slots on the face and top for adding stops, re-saw guides, and other accessories. The thin red line on the cursor lens helps set accurate cuts for veneer and tenons.

The fence adjusts for blade drift through two simple adjustments, and it can be installed or removed from the rail quickly. It weighs 8.14 pounds, giving it a solid feel on the table. Users find it works well on a variety of 14-inch saws from Jet, Delta, General, and Grizzly, though installation often requires drilling and tapping holes. Those with some mechanical ability report excellent results for the price.

Quality control is the main concern here. Multiple users report poorly threaded holes, nylon screws that strip, and instructions that are either missing or unclear. Some units arrive with aluminum shavings in the threads from manufacturing. If you are willing to chase threads and potentially replace a few fasteners, this fence delivers on value. For buyers who want a plug-and-play experience, the premium options above involve less frustration.

Check Price on Amazon

While not a fence itself, the Carter DEL14 Band Saw Guide Set is the essential complementary upgrade for a 14-inch Delta bandsaw that dramatically improves blade stability and cut accuracy. The sealed ball bearing guides reduce friction, keep the blade cooler, and make smoother cuts than the stock metal blocks that come with most Delta saws. The bearings adjust forward, backward, and side-to-side, and they are lubricated and sealed for life.

Users consistently report that this guide set transforms an older Delta 14-inch saw into a much more capable machine, with one reviewer describing the build quality as “NASA-grade.” The kit includes a new blade guard and both SAE and metric screws to accommodate different saw variations. Installing it on a saw with a round post is straightforward, while hexagonal posts may require minor adjustments. The improvement in cut quality is immediate and significant.

This guide set is not a direct replacement for a fence, but it works in tandem with any good fence system to deliver the full potential of your bandsaw. The allen wrench adjustments on the guides are less convenient than front-facing knobs, but the performance gain more than makes up for it. For anyone upgrading their Delta 14-inch saw, this guide set should be on the short list alongside a quality fence.