Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.9 Best Bathtub Faucet With Sprayer | Skip the Drip, Get the Spray

Check Price on Amazon

This wall-mount clawfoot filler delivers a genuine 7.0 GPM from the tub spout at 80 PSI, meaning you fill a deep soaking tub in under three minutes without resorting to a restrictive flow restrictor. The entire body is heavy solid brass with a polished chrome electroplate finish that resists corrosion — not a lightweight zinc alloy that feels hollow. The ¼-turn ceramic disc cartridges in both handles provide drip-free shutoff that compression washers cannot match.

The included handheld sprayer draws 1.8 GPM via a 59-inch braided hose, which is long enough to reach all corners of a standard clawfoot tub. Owners report the adjustable centers (3½ to 8½ inches) allow it to drop into vintage plumbing setups where the wall holes are irregularly spaced. The spout reach of 7⅞ inches centers the stream directly over the drain, minimizing splashing against the back rim.

One consistent note from installers: the supplied instructions may be generic for the line, so download the specific model diagram from Kingston Brass before beginning. The hose length on the sprayer is non-adjustable, but at 59 inches it fits most configurations without tangling. Multiple owners confirm that pairing this with the correct backflow vacuum breaker (included) satisfies local code.

Check Price on Amazon

This is a trim kit — it requires a separate Moen valve (4792, 4793, 4794, 4796, 4797, or 4798) — but the benefit is the M-PACT common valve system. If you change your bathroom style in five years, you swap only the trim without opening the wall or touching the valve body. The brushed nickel finish provides a warm, lightly brushed gray metallic look that resists fingerprints better than polished chrome.

The two-handle lever design gives independent hot and cold control, and the spout flow capacity reaches 16 GPM at full pressure — among the highest in this roundup. That matters for a deep soaking tub where a 2 GPM restrictor would turn bath time into a 15-minute wait. The sprayer hose runs through a deck-mount diverter that switches with a smooth ceramic disc action.

Owners praise the solid metal feel of the lever handles and the precise water temperature dial-in. The 3-hole widespread configuration (16 inches between outer holes) requires a tub rim that accommodates that spread. If your tub has a narrower rim, measure carefully — this unit does not collapse to a smaller span. The brushed nickel finish coordinates with the full Genta LX collection for a cohesive look.

Check Price on Amazon

This freestanding floor-mount unit uses a Ø35mm Sedal ceramic cartridge — a bigger diameter than standard 25mm cartridges — which translates to a smoother handle rotation and higher water flow through the main body. The spout outputs a maximum 6 GPM at 60 PSI, and the hand shower delivers 2.5 GPM, sufficient for both soaking and rinsing. The tripod base includes three bolts for securing to concrete or wood subfloor.

The 360-degree swivel spout rotates freely, letting you position the water stream precisely over the tub center regardless of the floor mount location. The 59-inch stainless steel braided hose on the handheld sprayer is long enough to reach over the tub edge for pre-rinsing. Brushed gold PVD finish is applied through a physical vapor deposition process that bonds the color at the molecular level — it resists spotting from hard water far better than standard electroplating.

Buyers often note the custom hose length service: the seller ships shorter hoses if you provide your floor-to-valve distance. The solid brass construction means the assembled unit weighs 5.9 kg, giving it a planted feel that does not wobble during handle operation. One word of caution: the brushed gold finish shows hard water spots more readily than chrome or matte black, so plan for regular wiping.

Check Price on Amazon

The standout number here is 11.9 GPM at 60 PSI from the tub spout — the highest flow rate in this list. That fills a standard 50-gallon soaking tub in just over four minutes. The secret is a wide internal water post and a brass body that does not bottleneck through a restrictive cartridge. The ceramic valve action is smooth and the brushed gold finish undergoes a seven-stage treatment process to prevent discoloration.

Two brass lever handles control hot and cold independently, and the diverter knob switches to the handheld sprayer. The sprayer itself delivers strong pressure with a noticeable kickback when first activated, which owners report is excellent for rinsing shampoo from long hair or creating bath bubbles. The 59-inch hose reaches across the tub with slack to spare, and the sprayer cradle mounts on the main body for storage.

Some buyers note that after turning off the spout, a small amount of residual water drips from the hand shower head — this is normal gravity drainage and stops within a few seconds. The floor plate requires precise alignment with the water supply lines; the seller offers custom hose lengths if the standard 90 cm supply hoses do not fit your stub-out location. The overall build quality rivals fixtures at twice the price point.

Check Price on Amazon

This is the only unit in the list that includes the rough-in valve in the box — the Delta MultiChoice Universal Shower Valve — saving you a separate purchase and simplifying installation. The H2Okinetic spray technology uses a unique waveform pattern that covers 3X more surface area than a standard shower head while still meeting WaterSense 1.75 GPM efficiency. Five spray modes give you PowerDrench, full body, full body with massage, massage, and pause.

The champagne bronze finish is a Brillance coating that tests to 2X the industry standard for corrosion resistance. The handheld sprayer attaches via a 59-inch hose, and the tub spout includes a diverter that switches to the shower head. Because the valve is integrated, you can later swap the trim without tearing out tile — a feature Delta calls “Invensys compatibility” with its MultiChoice line.

Owners consistently report that the temperature stays rock-steady even when someone flushes a toilet in another room, thanks to the Monitor pressure-balanced cartridge. The Touch-Clean spray holes let you wipe away calcium deposits with a finger swipe — no pin or brush needed. The downsides are minimal: the handle is plastic (though it feels dense), and the champagne bronze is a very specific warm tone that may not match existing brushed nickel fixtures.

Check Price on Amazon

The square geometric profile of this Delta trim set is designed for contemporary bathrooms where clean lines and sharp angles matter. The matte black finish is applied through Delta’s corrosion-resistant process that tests to 2X industry standards — it holds up well against the daily humidity of a tub surround. The trim includes the shower head, tub spout, handle escutcheon, and mounting hardware, but you need to purchase the MultiChoice Universal Shower Valve (R10000-UNBX) separately.

The 1.75 GPM flow rate is regulated for WaterSense compliance, meaning the sprayer stream is forceful despite the restrictor, thanks to Delta’s InnoFlex channels that maintain pressure. The Touch-Clean spray holes are particularly useful on a tub sprayer that sees mixed use — calcium deposits from hard water wipe away with a finger rub. The tub spout itself is a 8.69-inch square design that directs water vertically without splashing.

Users report that the handle operates with a precise, solid click and the temperature mixing is accurate within a single degree. The zinc and rubber construction of the trim feels dense, though the handle is plastic internally. The main consideration: this is strictly a trim kit. If you do not already have a compatible rough-in valve, factor that additional cost into your budget before buying.

Check Price on Amazon

This is the most complete package in the lineup: a stainless steel 8-inch rainfall shower head, a SUS304 handheld sprayer, a 7.8-inch waterfall tub spout, a brass 3-in-1 diverter valve body, and all mounting hardware — everything except the in-wall plumbing connections. The rainfall head uses SUS304 stainless steel rather than standard chrome-plated plastic, which resists corrosion and does not develop the pin-hole leaks that plague plated ABS heads.

The tub spout is a wide waterfall design at 7.8 inches — wider than most — which distributes water evenly without the concentrated jet that causes splashing. The handheld sprayer maintains flow even at low water pressure, thanks to the stainless steel internal channel. The 1.41 GPM flow rate is below the average spout fill rate in this roundup, so expect slightly longer tub fill times, but the trade-off is a shower system that meets strict water conservation requirements.

Customer reviews highlight the responsive after-sales support: multiple owners received replacement parts or custom fittings at no charge when their installation depth required an adjustment. The matte black finish is a multi-layer coating that resists scratching, though it is not as hard as a PVD finish. Note that renovating a tiled shower wall will require demolition to run the valve body; this is not a swap-in retrofit for existing tubs without wall access.

Check Price on Amazon

For freestanding tub installations on a tighter budget, this Senlesen floor-mount filler provides the essential feature set — single-handle temperature control, a 360-degree swivel spout, and a handheld sprayer with a 59-inch hose — without the premium price of solid brass units. The body is constructed from a combination of ABS, brass, and ceramic, with the primary water path through brass. The single lever handle with a ceramic cartridge gives smooth flow adjustment.

The diverter knob switches between the tub spout and the handheld sprayer, though some owners report that after turning off the water, a small amount of residual water drips from the sprayer if not held over the tub. This is typical of gravity-fed handhelds at this level. The 90 cm stainless steel braided supply hoses are standard length, and the seller can provide custom lengths for unusual stub-out positions.

Owners note that the unit can rotate slightly when the handles are operated, depending on how tightly the floor plate is bolted. Using plumber’s epoxy or ensuring the plate is fully cinched down resolves this. The black finish is a coating rather than a PVD bond, so it is more susceptible to chipping if struck by metal tools during installation. For the price, it delivers a convincing freestanding look with functional sprayer performance.

Check Price on Amazon

This wall-mount unit offers solid brass construction at a budget-friendly price point, making it accessible for clawfoot tub retrofits where the buyer wants a vintage telephone-style handheld sprayer. The double cross handles control hot and cold water independently, and the diverter switches between the tub spout and the handheld sprayer. The 1.25 GPM flow rate is on the lower side, but the water stream is described as full and not too forceful — pleasant for a soaking environment.

The installation hole distance is 5.9 inches, with adjustable NPT 1/2 adapters that accommodate spacing from 5 to 6.6 inches. Owners have successfully mounted this to a clawfoot tub using swing arms (sold separately), which expands its compatibility beyond strict wall-mount applications. The matte black finish is applied to prevent rust, though some users report that the handle knobs can loosen over time and require occasional tightening with thread-locking compound.

The telephone-style handheld sprayer has a classic aesthetic that pairs well with vintage or farmhouse bathroom designs. The hose is a standard 59-inch braided stainless steel line. Multiple customer reviews note that the company replaced entire units when parts were missing or damaged, indicating solid warranty support. The main compromise at this level is the 1.25 GPM restrictor — expect slower tub fill times compared to higher-end models.