Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Two 12-inch subs aren’t just about volume—they’re about feeling the bass in your chest, the kick that turns your daily commute into a personal concert. The thing is, picking a pair that actually lasts and sounds great takes more than grabbing the biggest wattage number you see on the box. This guide cuts through the inflated power ratings and the confusion about impedance and amp matching to show you exactly which pairs of 12-inch subwoofers are worth your time and money.
I’m Min — the founder and writer behind Gadgets Feed. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Whether you are after earth-shaking SPL or clean musical lows, the right two 12-inch subs will transform your car’s audio system, and our research makes sure you know exactly which pair fits your goals and your budget.
Our Picks at a Glance
How To Choose The Best Two 12-Inch Subs
Buying a pair of 12-inch subs is a big step up from a single driver or smaller size. The added cone area gets you deeper, more authoritative bass, but it also demands more from your electrical system and amplifier. Here is the short list of things you need to get right.
RMS Power Matching
The most important number isn’t the peak power—it’s the RMS (Root Mean Square) rating, the continuous power the subwoofer can handle. Your amplifier’s RMS output at the final impedance load should roughly match the combined RMS of your two subs. Underpowering a sub can cause distortion, which is a common way to damage a voice coil.
Impedance and Wiring
Impedance (measured in ohms) determines how much power your amp can deliver. Two subwoofers each with a single 4-ohm voice coil can be wired to a 2-ohm final load, which is very common for modern mono amplifiers. Dual voice coil (DVC) subs give you more wiring options to hit the exact ohm load your amp is stable at, like 1 ohm, 2 ohms, or 4 ohms.
Enclosure Type
Most 12-inch subs come as raw drivers you install in a box, or pre-loaded in an enclosure. A sealed box delivers tight, accurate bass that works across many music genres. A ported box is tuned to a specific frequency (often around 32-35 Hz) and produces significantly louder, boomier bass at that frequency, ideal for rap and EDM.
Quick Comparison
| Model | Best For | RMS Power (Pair) | Impedance | Magnet Size | Amazon |
|---|---|---|---|---|---|
| KICKER 44DCWC122★ Best Overall | Balanced Output | — | 2-Ohm | — | Amazon |
| CT Sounds TROPO-2X12D4Top Performer | Pre-loaded Simplicity | 1300W | 1-Ohm | — | Amazon |
| Rockville DV12K52Value Enclosure | Built-in Enclosure | 700W | 2-Ohm | 50 Oz | Amazon |
| Alpine W12S4 Bundle | Everyday Reliability | 500W | 4-Ohm | — | Amazon |
| KICKER CompR 48CWR124 | Cooling & Reliability | 1000W | 4-Ohm | — | Amazon |
| Gravity Warzone | High-Power SPL | — | 4-Ohm DVC | — | Amazon |
| Sundown Audio SA-12 D4 | SQ & SPL Hybrid | 1500W | Dual 4-Ohm | — | Amazon |
| JBL STAGE122 | Brand-Reliability | — | — | — | Amazon |
| MB Quart Slim Shallow | Shallow Mount Space | 400W | Dual 4-Ohm | — | Amazon |
| BOSS Audio Chaos CX122 | Budget Entry Level | 1400W | — | — | Amazon |
| Planet Audio AC12D | Entry-Level Bang | — | 4-Ohm | — | Amazon |
In‑Depth Reviews
1. KICKER 44DCWC122 Dual CompC 12″ Subwoofers in Vented Enclosure
Our pick — over 4.5★ from 400+ verified ratings; the strongest balance of quality and price.
The pre-loaded box that gets it right on day one.
This pre-loaded package eliminates the guesswork of box building and wiring. You get two genuine CompC 12-inch subwoofers already loaded in a custom ported enclosure made from heavy MDF (Medium-Density Fiberboard). The box is tuned and ready to go, so you skip the guesswork of measuring, cutting, and wiring from scratch. The system presents a 2-ohm final impedance, which is a balance for many mono amps.
Owners consistently praise the fair price and impressive output right from the start. Owners consistently praise the fair price and impressive output, with one buyer reporting they are “very impressed” after hooking them up. It is also noted that the Kicker grilles fit perfectly with the factory screws, a small detail that makes a clean install easier. The recurring advice from the crowd is to pair it with a quality amp, like a Rockford 500-watt unit, and not to overdrive it.
The honest trade-off is that a cheap or mismatched amp can kill these quickly, as one reviewer noted a unit “blew after 4 months despite low gain.” They need clean power, not a cheap, dirty signal. They are also not true dual-voice-coil subs—they are single 4-ohm drivers wired internally to 2 ohms, which limits your wiring flexibility for other impedance loads. For a reliable, plug-and-play setup that thumps with a quality amp, this is the smartest buy on the list.
Loaded and Ready
- Pre-loaded in a custom vented MDF enclosure—no box building required.
Watch Your Amp
- Vulnerable to damage from overpowered or low-quality amplifiers.
- Internally wired to a fixed 2-ohm load, limiting alternate wiring configurations.
Grab these if: You want a factory-engineered, drop-in solution that delivers balanced bass without spending hours on a custom box build.
Think twice if: You plan to run a high-power competition amp or need the flexibility of a true dual-voice-coil subwoofer.
2. CT Sounds Dual 12” 2600W Loaded Tropo Series Ported Car Subwoofer Box
The loaded box that brings serious build quality and a 1-ohm load.
If you want a sturdy, pre-built solution that is wired for maximum amplifier efficiency, this CT Sounds kit is a standout. It includes two TROPO-12 dual 4-ohm subwoofers in a kerf-port enclosure built from MDF wood with dado, miter, and rabbet joinery—that is pro-level box construction. The pair is pre-wired to a final impedance of 1 ohm, which allows a compatible mono amplifier to deliver its full rated power. The RMS power handling of the pair is 1300 watts, and the peak is 2600 watts.
Owners describe the box as “sturdy” with “serious weight in it,” and they report that it produces “extremely loud yet clear bass.” One buyer paired it with a CT1500.1d monoblock amp in a Chevy Suburban and said it “absolutely shakes the whole thing.” The construction earns praise for being stiff and well-made, using a carbon fiber composite cone that helps keep the bass tight and free of flubbery notes, even compared to other budget ported boxes. The consensus is that it sounds amazing right from the start with proper tuning.
The main thing to know is that this box is best with an amplifier delivering 800 to 1000 watts RMS—above that, it becomes less efficient. It is also heavy, so you need to be sure you have the trunk space for it. For anyone wanting a near-professional installation without building a box, this is the pick that offers the best blend of power and clarity.
Pro-Grade Build
- Pre-wired to 1 ohm, maximizing output from many modern mono amps.
- High-quality MDF box with kerf-port and dado joinery for reduced distortion.
Space & Power Hungry
- The loaded enclosure is heavy and requires significant trunk space.
- Efficiency drops when fed more than 1000 watts RMS.
Reach for this if: You want a high-quality, pre-loaded system that is wired for maximum power transfer and delivers loud, clear bass from a single, well-built box.
Look elsewhere if: Your build requires separate components or you have limited space for a large, heavy enclosure.
3. Rockville DV12K52 Dual 12″ K5 Car Subwoofers with Vented Enclosure
A complete loaded box with a beefy 50-ounce magnet.
Rockville delivers a heavy-hitting combo with this pre-loaded vented enclosure. The subwoofers feature a 50-ounce magnet and a cast iron basket, which are signs of a driver built for durability. The enclosure is made from 3/4-inch MDF and is computer-designed with vents tuned to 35 Hz for accurate bass response. The pair handles RMS power of 700 watts and peaks at 2800 watts, and it presents a 2-ohm final load. The voice coils are 2-inch 4-layer aluminum units wound with Japanese OFC (Oxygen-Free Copper) wire, and the cone is a fiber-reinforced ultra-stiff non-pressed paper design.
The build quality is the standout feature here, with many owners praising the solid construction and the “great sound” that comes from it. One owner noted that with a 300-watt pyramid amp barely turned up, the subs “bang” and sound “amazing.” The box itself produces no rattling noises, which speaks to the quality of its assembly. The box dimensions are 32.5 inches by 16.1 inches by 14.2 inches, so it will fit in most standard trunks without excessive modification.
Given its RMS rating, this set is best paired with a moderate amplifier—it hits hard without demanding a huge electrical upgrade. It is not intended for competition-level SPL (Sound Pressure Level) builds, but for a daily driver who wants substantial bass while staying affordable, this is a very solid, reliable package.
Solid and Strong
- Features a 50-ounce magnet and cast iron basket for long-term durability.
- Pre-loaded in a well-built, computer-designed vented enclosure tuned to 35 Hz.
Mid-Range Power
- At 700W RMS, it is outclassed by higher-wattage setups for extreme SPL competition.
- The enclosure is large and may not fit in compact vehicles.
Best for: Daily drivers who want a durable, turnkey system with a well-built enclosure and a solid power-handling rating for reliable thump.
Not for: Bass-heads chasing the highest SPL records or those needing a very compact subwoofer setup.
4. Alpine W12S4 12-inch Single 4 Ohm Subwoofer Bundle
The Alpine sound signature in an easy-to-wire bundle.
Alpine is a brand known for its clean, musical sound, and this bundle offers two of their W12S4 single 4-ohm subwoofers. Each sub handles 250 watts RMS, giving the pair 500 watts of continuous power handling, with a peak of 750 watts each. They feature a polypropylene and mica cone with a poly-foam surround, and the frequency response goes from 32 Hz to 200 Hz. The mounting depth is just over 5 inches, which makes them relatively easy to fit into a shallow sealed box.
Owners consistently say the sound quality is amazing “for the price,” and one buyer called it “unbeatable” for daily jamming rather than competition. The subs are reported to sound excellent even on factory amp power, though they come alive with a dedicated amplifier. A recurring piece of advice from the community is that these perform exceptionally well in small sealed enclosures, delivering tight, accurate bass that works across many music genres.
This is a set of raw drivers—you will need to buy or build an enclosure. The quality is reliable, but these are not designed to break SPL records. If you value musical accuracy and reliable performance from a respected brand name, and you are okay building a box, these Alpine subs are a fantastic foundation for a sound quality system.
Musical foundation: Two raw drivers from a top-tier brand, ideal for building a custom sound quality (SQ) system.
Start simple: You must purchase a box separately, but these subs are easy to pair with a moderate 500-watt amp for clean, accurate bass.
5. (2) Kicker 48CWR124 COMPR12 2000 Watt 12″ Car Audio Subwoofers
Kicker’s workhorse with forced-air cooling for long sessions.
Kicker’s CompR series is a legend in the car audio world, and this pair comes with a crucial upgrade: forced-air cooling that keeps the voice coils 25% cooler for increased reliability. Each subwoofer handles 500 watts RMS (1000 peak), giving the pair a 1000-watt RMS total, and features a 4-ohm dual voice coil. The frequency response ranges from 25 to 500 Hz, and the sensitivity is 86.9 dB. The mounting depth is 5.75 inches, which requires a box with moderate depth.
Owners are very happy with the sound, describing it as “worth every penny” and noting the subs provide “that extra bass you need to get your car sounding right.” One buyer runs them at about 400 to 450 watts peak and says they “thump” with lots of “powerful bass.” The Xmax (linear excursion) of 14 mm is a solid figure, meaning the cone can move a decent amount of air without distortion, which is key for loud, clean bass.
These are raw drivers, so you need to provide your own box. The 4-ohm DVC (Dual Voice Coil) configuration gives you wiring flexibility, allowing you to hit a 1-ohm or 4-ohm load depending on your amp. For a seasoned enthusiast building a custom box, these Kicker CompR subs offer a proven balance of power, reliability, and sound quality that is tough to top at this level.
Built for Reliability
- Forced-air cooling system increases durability during long, high-power listening sessions.
- DVC 4-ohm wiring offers flexibility to match most mono amplifiers.
Ready to Build
- No enclosure is included, requiring a separate box purchase or build.
- The 5.75-inch mounting depth is relatively deep and may not fit shallow boxes.
Ideal for: The enthusiast who wants a proven, reliable driver they can place in a custom box for a powerful and durable daily system.
Avoid if: You want a complete, pre-loaded subwoofer system that is ready to install from the start.
6. Pair of Gravity Warzone 12 Inch 6000 Watt Car Audio Subwoofer
High-power drivers built for the SPL competitor.
The Gravity Warzone subs are aimed at the bass-head who wants massive wattage on tap. This is a pair of 12-inch subwoofers with a 4-ohm dual voice coil, and each sub is rated for a peak power of 3000 watts. They feature a competition-grade pressed paper cone, a high-roll foam surround, and an advanced air-flow cooling system. The frequency response is rated from 30 to 500 Hz, with a sensitivity of 85 dB.
Owners are impressed with the build quality and the sheer output. One buyer matched the 6000-watt pair with a 6000-watt Lanzar amp and reports they “hit hard consistently,” highly recommending them. Another owner runs theirs at 5500 watts at 1 ohm and says they “go for days until my amp gets too hot,” noting they thought the subs would “go poof” but are still going strong after a year. The fact that they are “easily rebuildable” is also a major plus, as the design of the basket and motor allows for servicing if needed.
These are raw drivers with no box. Their peak power rating is very high, so you will need a serious amplifier and likely an upgraded electrical system (big 3 wiring, high-output alternator) to drive them properly. For the competitor or the serious enthusiast building a dedicated SPL vehicle, these subs offer a massive power platform at a price that is hard to argue with.
SPL focused: Designed for high-power handling and massive output, best suited for ported enclosures tuned for SPL.
Power system needed: Requires a very powerful amplifier and a significant electrical system upgrade to reach its potential.
7. Pair of SA-12 D4 CLASSIC- Sundown Audio 12″ 750W Dual 4-Ohm SA Series Subwoofer
The gold standard for balanced SPL and low-end quality.
Sundown Audio’s SA series has a cult following for a reason: it hits hard while sounding musical. This pair of classic Rev3 SA-12 D4 subwoofers handles 750 watts RMS each, giving you a total of 1500 watts of continuous power handling. They feature a large, advanced motor structure and are designed to be equally at home in sealed or ported enclosures. The dual 4-ohm voice coils allow wiring to a 1 ohm or 4 ohm final load for maximum amplifier compatibility.
What wins people over is the performance that many say “rivals JL W7/DD level 3-4” at the price. Buyers report hitting 152.1 dB with a pair in a 4.5 cu/ft vented box running at 1389 watts. They describe the bass as “deep, strong, and crisp” with excellent sound quality (SQ). The subs are well-packaged and well-made. Even owners who use them for daily driving report they are “unbeatable for the price” and that they “jam in the ride.” The build quality is top-notch, with stitched-on XL tinsel leads and spring-loaded terminals.
One owner found they are not ideal for sealed boxes, noting a “voice coil pop under 30Hz” and recommending ported boxes tuned to spec. They also run hot quickly at high power. If you are serious about getting high SPL without sacrificing musicality, and you are willing to build a proper ported box, the Sundown SA-12s are an investment that pays off in performance.
SQ & SPL King
- Handles 1500W RMS (pair) and is known for excellent sound quality alongside high SPL.
- Dual 4-ohm voice coils offer flexible wiring options to match your amplifier.
Needs the Right Box
- Reportedly not well suited for sealed enclosures; a custom ported box is recommended.
- Can run hot at high power levels, requiring careful tuning.
For the connoisseur: The top pick for the enthusiast who demands both high output and excellent musical fidelity from their subs.
skip it if: You prefer a simple sealed box or you are on a budget that doesn’t allow for the necessary electrical upgrades and custom enclosure.
8. JBL – Two STAGE122 12″ Car Audio Subwoofers
JBL’s 70-year heritage of sound quality in a raw driver.
JBL’s Stage series brings the brand’s legendary sound signature to your car. This bundle of two STAGE122 12-inch subwoofers uses polypropylene cones with rubber surrounds, which JBL says offers clean reproduction and high durability. They undergo a rigid testing process that involves freezing, baking, shaking, and blasting them with UV light. The speakers are carefully tuned to assure high SPL and low distortion, giving you that classic “JBL sound.”
Owner experiences are mixed, but the positive reviews paint a picture of ruggedness. One buyer reports ripping on them “well over the RMS rating” and even filling the cone with water from a trunk leak, yet they “still go hard.” Another says they are a “great sound lots of boom bang” and would buy them again. The consensus from the supportive owners is that these are tough, clean-sounding drivers that can take a beating.
The honest trade-off is that some owners found them “not that loud” and “very little thump,” noting the magnets are small and double-stacked. The performance seems to be very dependent on the box and amp pairing. These may not satisfy a hardcore SPL competitor, but for someone who wants a respected brand name and drivers that can handle abuse, they are a solid mid-range choice for a daily driver.
Heritage driver: A pair of raw 12-inch subs from a trusted brand, known for durability under harsh conditions.
Performance variance: Some owners mention excellent output, while others find them underwhelming, so box and amp matching is critical for these.
9. MB Quart 800 Watt 12 Inch Slim Shallow Subwoofer Speakers with Dual 4 Ohm Voice Coils
Slim enough for under-seat truck boxes.
Not every car or truck has space for a deep 12-inch sub. The MB Quart slim shallow subwoofers solve that problem with a mounting depth of just 3.07 inches. They have a cut-out diameter of 10.67 inches. Each sub handles 200 watts RMS (400 RMS for the pair), with a peak of 800 watts total. They feature dual 4-ohm voice coils, giving you wiring flexibility, and a thermal formed poly-cone with a butyl rubber surround.
What the owners love is that, given the right amp, these truly “SLAM.” One buyer reports they “sound incredible with zero distortion at 4 ohms” when paired with a 1000-watt peak, 500-watt RMS monoblock. Another found success with a Skar RP 1200.1D amp in a crew cab truck, stating they “hit hard” and they would “buy again.” The shallow design is a perfect fit for under-seat enclosures in extended-cab trucks where a full-size sub won’t go.
Long-term durability is a concern. As one owner put it, they “really do just stop working after a while.” They also require a powerful, stable amp to perform, and finding one that works flawlessly at 2 ohms has been a challenge for some. If space is your primary constraint and you are willing to match them with a high-quality amp, these are a fantastic solution. If you have room for a deeper sub, you might get better long-term reliability.
Fits Tight Spaces
- Ultra-shallow 3.07-inch mounting depth fits under seats and shallow truck boxes.
- Dual 4-ohm voice coils offer wiring flexibility for your amplifier.
Fragile Reputation
- Some customers note they fail after a period of use, potentially due to thermal issues.
- Requires a high-quality, stable amplifier to hit full potential and last.
Reach for these if: You need 12-inch bass in a tight space like under a truck seat and are prepared to pair them with a quality monoblock amplifier.
Look elsewhere if: Long-term reliability is your top concern and you have enough room for a standard-depth subwoofer.
10. BOSS Audio Chaos CX122 12″ 2800 Watt Car Power Subwoofer Pair
The budget pair that thumps harder than its price tag suggests.
The BOSS Audio Chaos CX122s are the entry-level crowd-pleaser. Each sub handles 1400 watts peak and 700 watts RMS. They are built with a rubber surround and a stamped steel basket for durability. The mounting diameter is 11.102 inches with a depth of 5.4 inches, making them a standard fit for most boxes. They feature push terminals for easy wiring, and the sound quality is the top positive aspect, praised by many owners.
Owners consistently say these subs are “very well built and even better sounding,” one buyer built a custom 1.2 cu ft sealed enclosure and reported “amazing hard-hitting, crisp bass with no distortion.” Another said they “produce massive bass, shaking mirrors.” The consensus is strong: for the price, you get excellent sound quality and output. The realistic RMS output is more like 400-500 watts each, but even with a modest 150-watt amp, they perform well.
An occasional unit fails; one buyer mentioned one “blew after 1.5 years.” The build quality is good, but not indestructible. They also have a high peak power rating, which can be misleading. As long as you feed them a clean signal from a decent amp and don’t clip them, these subs will serve you very well for years. For anyone on a tight budget who wants to get into 12-inch bass, this is the undisputed value king.
Pound for Pound
- Exceptional value for money with owners praising the sound quality and performance.
- Durable construction with rubber surround and stamped steel basket.
Power Caution
- Peak power rating is inflated; realistic continuous handling is around 400-500W RMS per sub.
- An occasional report of failure after extended use at high power levels.
Best for: The budget-conscious buyer who wants maximum thump for minimal cash—a proven entry-level setup.
pass on it if: You are an audiophile seeking pristine sound quality, or you plan to run a high-power competition system.
11. Planet Audio AC12D 12-Inch 3600W Subwoofers (Pair)
The budget bruiser that bangs hard for the price.
Planet Audio’s AC12D subs are built for one thing: delivering a lot of bass for a little cash. This pair is rated for 1800 watts peak each (3600 total). They feature a 4-ohm dual voice coil and a durable polypropylene cone with a foam surround. The sensitivity is 88 dB with a resonant frequency of 32 Hz, which should let you hit low notes with minimal distortion. The mounting depth is 5.38 inches.
The thing everyone raves about is the value and the sheer output. One owner says they “bang hard” on a Tahoe and “outperform many in this price range.” Another reported they “hit low notes my previous MTX couldn’t” and described them as “solid, deep bass when properly tuned.” For a starter system, they are impressive. The price-performance ratio is the single highest positive aspect, praised by buyers.
Durability is the main concern. The sound quality gets mixed feedback, and the most common negative is that they can fail dramatically. One owner reported that “voice coils welded and cones melted after 1.5 hours of use with 1000W clean power.” They are made with budget materials; the cones are described as “slightly flimsy.” For a beginner who wants to dip their toes into loud bass without a big investment, these are fine, but they are not built for long-term daily abuse at high power.
Bang for the Buck
- Highest peak power rating in the budget tier, appealing to beginners.
- Reviewers point out excellent price-performance ratio and hard-hitting bass.
Fragile by Design
- Durability is a major concern, with reports of voice coils and cones failing quickly.
- Sound quality is mixed; these are more for SPL than audiophile listening.
Reach for these if: Your budget is tight and you want to see what a pair of 12s can do without a big investment.
Avoid if: You need a daily driver that will last for years, or if you plan on running a high-power amplifier.
Understanding the Specs
RMS vs. Peak Power
RMS (Root Mean Square) is the amount of continuous power a subwoofer can handle. This is the number that matters for daily driving. Peak power is the short burst it can handle for a split second—manufacturers often inflate this number for marketing. When matching an amplifier, always use the RMS value of your subs, not the peak. A good rule of thumb is to get an amp that delivers between 75% and 150% of your sub’s RMS rating at the final impedance load.
Impedance (Ohms)
Impedance is the electrical resistance the subwoofer presents to the amplifier. A lower impedance (like 1 ohm or 2 ohms) allows the amp to deliver more power, while a higher impedance (4 ohms) is easier for the amp to drive. Dual Voice Coil (DVC) subs have two separate voice coils, which gives you more ways to wire them (series, parallel, or independent) to achieve your target final impedance load. Always check your amplifier’s specifications to see what impedance it is stable) it can safely drive at.
FAQ
What size amplifier do I need for a pair of 12-inch subs?
Should I buy a sealed or ported enclosure for my two 12-inch subs?
What does Dual Voice Coil (DVC) mean for my subwoofers?
Is 2 ohms or 4 ohms better for two 12-inch subwoofers?
How do I wire two dual 4-ohm subs to a 1-ohm load?
What is the difference between peak power and RMS power on a subwoofer?
Will two 12-inch subs be too loud for a small car?
What does “sensitivity” (dB) mean for a subwoofer?
How long do car subwoofers typically last?
Do I need an aftermarket stereo to run two 12-inch subs?
What is a “kerf port” on a subwoofer box?
Final Thoughts: The Verdict
For the majority of shoppers, the two 12-inch subs package that delivers the best overall blend of performance, reliability, and convenience is the KICKER 44DCWC122, because it comes pre-loaded in a high-quality ported box with a proven reputation for balanced output. If you want a sturdy, pre-wired system that is ready to hit hard from the moment you connect it, the CT Sounds TROPO-2X12D4 offers 1300 watts RMS in a professional-grade kerf-port enclosure. And for the budget-conscious buyer who wants to get into 12-inch bass without spending much, the BOSS Audio Chaos CX122 pair is the value champion, offering impressive performance for the price that has made it a crowd favorite.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Gadgets Feed earns from qualifying purchases. This does not affect which products we feature.