How Big Is 22 x 28? | Poster Board Dimensions Explained

A 22 x 28 sheet measures 22 inches wide by 28 inches tall, converting to 55.88 cm by 71.12 cm, making it the standard large-format size for poster boards and presentation materials in North America.

Whether you’re prepping a science fair project, ordering a commercial poster, or framing artwork, knowing the exact dimensions of 22 x 28 is essential. This size sits between a standard sheet of paper and a full billboard—large enough to command attention, but still manageable for wall displays. Let’s break down what 22 x 28 really means in practical terms, from metric conversions to printing requirements and framing fit.

The Exact Dimensions Of 22 x 28

The 22 x 28 measurement always refers to 22 inches in width and 28 inches in height (portrait orientation), unless specified otherwise by the manufacturer. This gives a total surface area of 616 square inches—roughly the size of four standard sheets of letter paper laid side by side. In metric units, that’s 55.88 cm wide by 71.12 cm tall (558.8 mm × 711.2 mm), using the exact conversion factor of 1 inch = 2.54 cm. Unlike Letter or A4 sizes, 22 x 28 is not an official ANSI or ISO standard, meaning availability can vary by manufacturer and region, though it remains the de facto North American standard for poster board and large-format prints.

Buying The Right 22 x 28 Frame

If you’re framing a 22 x 28 print or poster, pay attention to the visible display area: a standard frame labeled “22×28″ typically shows only 21.5″ × 27.5” due to the frame’s lip overlap. For a true full-image display, you need a no-mat, true-fit frame that holds the artwork flat against the glazing. Our tested picks for the best 28 x 22 frames include models with tempered glass, outer dimensions of roughly 24.5″ × 30.5″ × 1″ depth, and depth capacity up to 0.15″ with backing. If you prefer a mat, look for a 26″ × 32″ frame with a mat opening cut to 21.5″ × 27.5″ for your 22 x 28 piece. Tempered or shatter-resistant glass is recommended over standard glass for safety, especially in high-traffic areas.

Printing 22 x 28: Bleed, Safe Area, And DPI

When designing for print, a 22 x 28 poster requires specific margins. The final trim size is 22″ × 28″, but you must set your full bleed size to 22.25″ × 28.25″—that extra 0.25″ on each side ensures no white edges appear after trimming. The safe area (where no important content should fall) is 21.75″ × 27.75″, leaving a 0.125″ margin inside the bleed. Artwork should be set to a minimum of 300 DPI for crisp print quality. Standard home printers cannot handle single-sheet 22 x 28 printing; you’ll need a wide-carriage desktop printer capable of feeding 22-inch-wide media, or a commercial large-format printer. Poster board versions (like the 0.02-inch thick white board weighing 0.452 pounds) are thin and flexible—use a stiff backing or frame to prevent curling during vertical display.

Common Mistakes People Make With 22 x 28

The most frequent error is orientation confusion: “22 x 28″ means 22 inches wide, 28 inches tall—not the reverse. Always confirm your artwork is laid out in portrait orientation unless your frame or display is designed for landscape. The second big mistake is skipping the bleed: without the full 22.25″ × 28.25” artwork size, you’ll see thin white borders on the final print. Frame fit is another trap—many buyers assume a “22×28″ frame shows the full 22 x 28 image, but standard frames reduce the visible area to 21.5″ × 27.5” due to the rabbet. Always check the frame’s specification for display area before purchasing. Finally, remember that 22 x 28 is primarily a North American standard—if you’re sourcing materials internationally, verify availability rather than assuming it’s as common as A3 or A2 metric equivalents.

FAQs

What are the metric dimensions of 22 x 28 in cm?

22 x 28 inches converts to 55.88 cm wide by 71.12 cm tall. This is calculated using the standard conversion rate of 1 inch equals exactly 2.54 cm, which you can verify with any reliable conversion calculator.

What is the difference between 22 x 28 and 24 x 36 poster sizes?

22 x 28 is smaller by about 15% in surface area, making it more suitable for classroom posters, mounted prints, and moderate-sized wall displays. 24 x 36 requires larger frames and is the standard for movie posters and large commercial signage—but also demands larger storage and shipping.

Can I print a 22 x 28 poster on a regular home printer?

No. Standard home printers can handle at most 8.5″ or 11″ wide sheets. Printing at 22 x 28 inches requires a wide-carriage printer capable of feeding 22-inch-wide media, or you’ll need to use a commercial print service or large-format printer at a local print shop.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.