A rivet gun works by pulling the mandrel of a blind rivet backward to deform its body against the workpiece, or by delivering repeated impact blows to compress a solid rivet’s tail into a secure shop head.
Whether you’re fastening HVAC ducts, assembling aluminum panels, or working on aircraft sheet metal, the rivet gun is the tool that makes permanent mechanical joints possible without welding. The exact mechanism depends on whether you’re setting blind rivets (the common pop rivet with a central pin) or solid rivets (the traditional aircraft-style fastener that requires a bucking bar). Here’s how each type actually works, step by step.
The Core Mechanism: How Mandrel Tension Sets a Blind Rivet
Blind rivet guns—whether manual, pneumatic, or cordless—all operate on the same principle: the tool’s jaws grip the rivet’s central mandrel firmly while the nosepiece sits over the rivet body. When you squeeze the trigger or handles, the pulling mechanism retracts the mandrel backward through the rivet’s tubular body. As the mandrel pulls, the rivet body deforms and expands outward, creating a secondary head behind the workpiece that clamps the materials together. Once sufficient tension is reached, the mandrel snaps at a predetermined break notch, leaving the rivet permanently set. In pneumatic models, a valve or spring then shifts air to return the piston for the next cycle.
Pneumatic and Cordless Guns: Air vs. Battery Power
Pneumatic rivet guns convert compressed air into linear force through a piston. They require 90 to 100 PSI of air pressure to set most rivets. Pulling the trigger opens a throttle valve, allowing pressurized air to push the piston against the rivet set, driving the blind rivet body to expand. Many pneumatic models also include an internal waste system that collects the broken mandrel automatically—a major convenience for production work.
Cordless rivet guns use an electric motor to generate the pulling force, offering the same one-handed operation without the hose. They are ideal for field work or tight spaces where dragging an air compressor is impractical. For anyone deciding between options, our roundup of the best air rivet guns on the market breaks down real-world performance and features.
How Solid Rivet Guns Work: Impact and the Bucking Bar
Solid rivet guns are impact tools that function like a very controlled hammer. The gun delivers repeated axial impact blows against a rivet set held on the factory head of the solid rivet. A bucking bar is held against the tail of the rivet to restrain it. The gun’s impact compresses and work-hardens the tail between the workpiece and the bucking bar, flattening it into a shop head that draws the workpieces tightly together. This method requires holding both the gun and the bucking bar axially aligned with the rivet—any angle produces an uneven shop head and a weak joint.
Common Mistakes and How to Avoid Them
The most frequent errors come down to fit and technique. Using a nosepiece that does not match the rivet diameter causes slippage or damage. A rivet too short for the material thickness results in a loose joint that won’t hold. Failing to hold the rivet set and bucking bar axially in solid riveting creates uneven shop heads. Releasing the trigger before the mandrel snaps leaves the joint unsecured. And not cleaning metal shavings from pre-drilled holes prevents the rivet from seating fully against the work surface.
FAQs
What is the difference between a blind rivet and a solid rivet?
A blind rivet has a tubular body with a central mandrel and can be installed from one side of the workpiece. A solid rivet has no mandrel and requires access to both sides, with a bucking bar held against the tail while the gun hammers the factory head.
Can a pneumatic rivet gun set solid rivets?
Standard pneumatic blind rivet guns cannot set solid rivets. Solid rivets require an impact-type rivet gun that delivers repeated axial hammer blows, not the pull-and-snap mechanism of a blind rivet tool. Impact and blind rivet guns are fundamentally different tools.
What causes a rivet joint to fail?
Common failure causes include using the wrong rivet diameter for the hole, a rivet that is too short for the material stack, misalignment of the tool and bucking bar in solid riveting, and releasing the trigger before the mandrel snaps in blind rivets. Clean drilling and correct nosepiece fit prevent most failures.
References & Sources
- Wikipedia. “Rivet Gun.” Primary overview of rivet gun mechanisms, types, and operational principles.
- Atlas Copco. “How Does a Pneumatic Rivet Gun Work?” Explains the compressed-air-to-linear-force conversion in pneumatic models.
- Experimental Aircraft Association (EAA). “Setting or Driving Solid Rivets.” Details the impact tool and bucking bar technique for solid rivet installation.
