How Does an Inflatable Life Jacket Work? | CO₂ Inflates The Bladder

An inflatable life jacket works by storing a deflated bladder that fills with CO₂ gas when triggered manually or automatically.

Unlike foam life jackets, it is not inherently buoyant until inflated, so knowing exactly how the trigger systems work is the difference between floating and finding out too late.

The Core Mechanism: CO₂ And The Inflator

The system is simple: a sealed bladder sits folded inside the vest, connected to a small compressed-gas cylinder. When activated, an inflator mechanism punctures the cylinder’s seal, and the gas rushes into the bladder.

There are four essential components in every model:

  • The bladder — the air-holding chamber that expands when filled.
  • The CO₂ cylinder — the compressed-gas source that does the inflating.
  • The inflation mechanism — the trigger that punctures the cylinder.
  • The oral inflation tube — the manual backup for topping up or filling without gas.

Inflation is fast.

Manual, Automatic, Or Hydrostatic: Which Trigger Do You Have?

The trigger system is the single most important thing to know about your vest because activation and re-arming differ for each type.

Manual jackets require you to pull a cord or lanyard. That pull punctures the CO₂ cylinder and releases the gas. The vest stays un-inflated until you act, which makes it a poor choice if you might be unconscious on impact.

Automatic jackets use a water-soluble bobbin or pill that dissolves when submerged, firing the inflator without any action from you. These are the better pick for an unconscious wearer because they inflate on their own. The drawback is splash or heavy rain can cause false activation with some trigger types.

Hydrostatic jackets use water pressure rather than a dissolving bobbin. CM Hammar is the best-known brand for this system, and a U.S. Coast Guard Auxiliary source identifies Halkey-Roberts, Secumar, and CM Hammar as accepted inflator brands.

If you’re weighing automatic against manual options for your next purchase, our roundup of tested automatic inflatable life jackets breaks down the trade-offs on real models.

How To Inflate (And Reinflate) Your Vest

Every procedure below is from manufacturer documentation, and each one ends with a clear success sign.

Manual inflation: grip the pull cord or handle firmly and yank it outward. The cylinder punctures and the bladder fills. the vest puffs out against your chest within seconds.

Automatic inflation: the jacket does the work when the trigger element gets wet. the bladder is fully firm without you touching anything.

Oral inflation: open the cover, pull the dust cap off the tube, and blow air in until the bladder is firm. This is also the method for topping up a partially inflated vest. Manufacturer guidance often recommends removing the CO₂ cylinder first to prevent an accidental discharge while you work on the vest.

Common Mistakes That Leave You With No Flotation

The failures are predictable, and they are all avoidable with one quick check.

  • Assuming it floats before activation. An uninflated vest provides zero buoyancy. Your foam-jacket instincts do not apply.
  • Forgetting the trigger is consumable. Bobbins and pills dissolve and expire. Automatic vests need periodic re-arming or they will not fire when you need them.
  • Never testing the oral tube. If the CO₂ system fails, the mouthpiece is your backup. If you’ve never practiced using it, you will not manage it in cold water.

Check your vest before every trip. Confirm whether it is manual, automatic, or hydrostatic, verify the cylinder is full and the bobbin is fresh, and practice the oral inflation once so it is not a first-time experience in an emergency.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.