How Much Does 5 Gallon Paint Cover? | Real Coverage Numbers

A standard 5-gallon pail of interior latex wall paint covers approximately 1,750 to 2,000 square feet for a single coat, based on the industry standard of 350–400 square feet per gallon.

Walking into the paint aisle with a room measurement in hand can feel like guesswork. The difference between one pail and two can mean hundreds of dollars and a trip back to the store. The real number for a 5-gallon bucket depends on paint type, surface texture, and how many coats you need, but the standard range is reliable enough to plan a whole room or small house exterior on the first try.

What Does 5 Gallons of Paint Actually Cover?

Under ideal conditions — smooth, primed drywall, a gentle color change, and proper rolling technique — a 5-gallon pail of quality wall paint handles one coat across 1,750 to 2,000 square feet. For two coats, which most paint manufacturers recommend for durability and even color, the practical coverage drops to 875 to 1,000 square feet. That is roughly a 12-by-14-foot room with standard 8-foot ceilings painted twice, or one large master bedroom with a single coat.

The coverage rate shifts notably with paint type. Trim and ceiling paints stay close to the wall paint baseline. Exterior paint varies more, landing between 250 and 400 square feet per gallon depending on the siding material’s porosity. Primer is the biggest gap — it typically covers only 200–300 square feet per gallon, so a 5-gallon pail of primer covers 1,125 to 1,375 square feet for one coat.

How To Calculate Your Exact Paint Needs

Sherwin-Williams and BEHR both publish the same three-step method for figuring out whether one 5-gallon pail is enough. Measure the perimeter of the room and multiply by the wall height to get total wall area. Subtract 15 square feet per window and 20 square feet per door. Then divide the remaining area by the coverage rate — 350 for rough estimates, 375 or 400 for smooth surfaces — and multiply by the number of coats.

If you are painting a dark wall a light color, expect to need three coats in some cases. Each extra coat cuts the 5-gallon coverage by roughly a third, turning that 1,800-square-foot pail into a 600-square-foot pail for a tough color shift.

For textured walls, knockdown ceilings, or unpainted drywall, coverage drops by 20–50 percent because the surface absorbs more paint and the nap of the roller holds less in each dip. Drop the per-gallon rate to 250 square feet and recalculate. A 5-gallon bucket on a textured ceiling might cover only 1,250 square feet for one coat.

Common Mistakes That Waste Paint

The most expensive mistake is assuming the label’s maximum coverage rate applies to your surface. Fresh drywall, exterior wood, and old repainted walls with patches all absorb paint faster than the smooth painted wall the manufacturer tested on. Spraying instead of rolling can push coverage up slightly, but it often needs more paint to reach full opacity on the first pass.

Neglecting trim math is the second-biggest error. Trim paint is calculated separately — a common rule of thumb is one gallon of trim paint for every eight gallons of body paint. If your 5-gallon pail is for body only, you still need a separate gallon for baseboards, window casings, and crown molding.

FAQs

Does one 5-gallon bucket cover a 12×12 room?

A 12×12 room with 8-foot ceilings has roughly 320 square feet of wall area after subtracting one door and one window. One 5-gallon bucket covers 1,750 to 2,000 square feet for one coat, so it would handle five to six rooms of that size, or two full coats across two similar rooms.

How much exterior paint do I need for a 1500 square foot house?

A 1,500-square-foot single-story house typically has about 1,200 to 1,500 square feet of wall area. One 5-gallon bucket of exterior paint covers 1,250 to 2,000 square feet for one coat. You will likely need two 5-gallon buckets for a two-coat job on textured siding.

Why does primer always cover less than paint?

Primer is designed to seal porous surfaces and create a uniform base, so it sinks into drywall and wood rather than sitting on top. The standard primer coverage of 200–300 square feet per gallon reflects this absorption. A 5-gallon pail of primer covers roughly 1,125 to 1,375 square feet for one coat.

References & Sources

  • Sherwin-Williams. Paint Calculator & Color Tools Provides standard coverage rates and per-gallon calculations for interior and exterior paints.
  • BEHR. How Much Exterior Paint to Buy Offers coverage estimates and step-by-step calculation methods for exterior projects.
  • Benjamin Moore. Paint Calculator Assumes two coats as standard and excludes ceilings for accurate interior room estimates.

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.