How to Apply Terro Ant Killer Granules | Direct Application Steps

Apply Terro Ant Killer Plus granules by spreading them directly over ant hills or fire ant mounds, then watering in immediately—the watering method differs between ant types for the product to work.

Terro Ant Killer Plus granules (model T901-6) kill ants through contact and ingestion, but the 0.04% lambda-cyhalothrin needs the right moisture conditions to activate.

Perimeter Treatment: The Foundation Band

For ongoing prevention around a home, spread a 3–10 foot band of granules along the foundation where ants typically enter. Use 2–3 pounds per 1,000 square feet. Water the band lightly immediately after spreading—enough to dampen the granules without creating runoff. Best timing is when insects first appear or you notice lawn damage near the foundation.

Before applying, remove leaf litter and cut back any vegetation touching the foundation so the granules reach the soil directly. Do not exceed 6 applications per year.

Spot Treatment: Regular Ant Hills vs Fire Ant Mounds

Regular ant hills need light watering; fire ant mounds require heavy saturation.

For regular ant hills, apply 1–2 teaspoons of granules directly over and around the hill. If the soil is dry, water lightly before application. After spreading the granules, water them in lightly—a brief sprinkle that saturates the granules without washing them away from the hill. Heavy watering on regular ants pushes the active ingredient past where the ants travel.

For fire ant mounds, apply ½ cup of granules over the mound and spread them roughly 2 feet around it. Water in completely using a minimum of 1 gallon of water per mound. Use a gentle spray—a high-pressure hose disturbs the ants and scatters the colony, making the treatment ineffective. Do not disturb the mound before or during application. Fire ants that relocate after being disturbed simply rebuild nearby, and the granules are wasted.

The for fire ants, the mound should be visibly saturated with water pooling at the base. For regular ants, the granules should look damp but the hill should not be flooded.

Best Timing and Conditions

Apply granules when the ground is completely dry—wet soil dilutes the active ingredient before ants contact it. Ants forage most actively in early morning or late evening, so those windows give the best exposure.

Ideal temperature range is 65–80°F. Cool weather keeps ants active near the surface longer. Avoid applying within 24 hours of expected rain, and do not water the lawn within 24 hours after application. The granules need a dry window to remain in place on the soil surface where ants encounter them. Do not mow the lawn within 24 hours either—mowing kicks granules off the soil and reduces coverage.

Common Application Mistakes

Applying before rain or on wet ground also renders the granules useless. Finally, do not disturb the mound before or during treatment—leave it intact so ants carry the granules into the colony.

Safety and Storage

Use Terro Ant Killer Plus outdoors only—on lawns, around foundations, and as spot treatment for mounds. Not for indoor use. The active ingredient is EPA-regulated and approved for US outdoor use. Do not use the same measuring device for food after handling the granules. Store the resealable shaker bag in a dry location away from moisture. Reapply every 2 months, with a maximum of 6 applications per year.

FAQs

Can I use Terro Ant Killer Plus indoors?

No, this product is approved for outdoor use only on lawns, around foundations, and as spot treatment for ant mounds. Using it indoors violates the label instructions and can create unnecessary chemical exposure in living spaces. For indoor ant issues, use Terro’s indoor liquid baits instead.

How soon after rain can I apply the granules?

Wait at least 24 hours after the last rainfall, and check that the ground is fully dry. Wet soil prevents the granules from settling properly and dilutes the active ingredient before ants can pick it up. For best results, pick a stretch of dry weather with no rain forecast for the next 24 hours.

What happens if I skip watering the fire ant mound?

The granules will not release the active ingredient, and the treatment fails completely. Fire ant mounds require a minimum of 1 gallon of water worked in gently to activate the product. Dry granules sitting on top of a fire ant mound produce no control, and the colony continues growing undisturbed.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.