How to Attach Skateboard to Backpack | Easy, Secure Carry Methods

Attaching a skateboard to a backpack is done by threading it through dedicated loops or using lanyards, bungee cords, or straps, with the grip tape facing the bag and the wheels outward for stability.

You just finished a long ride and need to carry your board through a store, onto a train, or up a flight of stairs. The trick is knowing how to attach a skateboard to a backpack so it stays put without damaging your bag or clattering against your back. Whether your backpack has built-in straps or not, there are five reliable methods that work.

Best Backpack Features for Carrying a Skateboard

A backpack with dedicated skateboard straps or loops makes the job much easier. Look for bags with two horizontal straps across the front, vertical loops near the shoulder straps, or a rigid skateboard carry system. Bags lacking these features still work, but you will need to improvise with a lanyard, paracord, or DIY straps. If you are shopping for a board-friendly bag, our tested roundup of backpacks with skateboard straps covers the best options that can handle a board securely.

Method 1: The Slip-Through Loop or Strap Method

This is the quickest method when your backpack already has horizontal front straps or loops. Slide the skateboard under both straps, positioning the deck between the trucks so the straps rest against the board’s flat middle section. Tighten each strap until the board cannot shift side to side. Always orient the board with the grip tape facing toward the backpack and the wheels pointing outward to prevent the trucks from rubbing against the bag or your clothes.

the board does not slide when you grip the outer wheels and try to move it.

Method 2: Lanyard, Paracord, or Bungee Cord

If your backpack lacks straps, a lanyard, piece of paracord, or a bungee cord works well. Loop the cord under your backpack’s shoulder straps near the base, then bring it up and around each truck on the board. Secure the ends by knotting them back onto the cord itself or fastening a carabiner. Center the board vertically between your shoulder blades so it rides naturally without throwing off your balance.

the board stays in place when you bend forward or walk quickly; the cord feels taut without digging into the backpack fabric.

Method 3: Carabiner or Clip Attachment

Small carabiners or heavy-duty clips provide a fast, tool-free solution. Attach one carabiner to a loop or D-ring near the top of each shoulder strap, then clip the carabiner’s gate around the skateboard’s truck base or between the wheels. This method works best for short trips because the board can dangle freely and may swing. To reduce movement, slide a second carabiner near the bottom of the bag and clip the lower truck as well.

the board hangs evenly, and neither clip is bent or strained by the weight.

Where to Place the Board and Common Mistakes

The orientation of the skateboard matters just as much as how you fasten it. Keeping the grip tape against the backpack prevents the rough surface from ruining the fabric, and it forces the wheels and trucks outward where they have room to clear your body. A board mounted backward (grip tape facing out) will slide down the bag and wear through the straps over time.

The most frequent mistakes include leaving the board too loose, which causes it to swing and lose stability, or using a backpack strap that is too thin to handle the weight. Always test the fit before carrying the board a long distance: hold the backpack by one top loop and shake it gently — if the board shifts, tighten the connection.

Attachment Method Best For Tools Needed
Slip-through loop/strap Backpacks with front straps; most stable None — bag’s existing straps
Lanyard/paracord Bags with no external loops Lanyard, paracord, or bungee
Carabiner/clip Quick, temporary attachment Two carabiners or clips
DIY strap (sew-on velcro) Permanent modification Velcro straps, sewing supplies
Bungee + grommets Bags built from scratch or modified Grommets, bungee cord, hole punch

FAQs

Can I attach a longboard the same way as a skateboard?

Yes, but a longboard’s longer deck requires wider straps or two connection points (one near each truck) to keep it from tilting. Vertical attachment between the shoulder straps typically works best, and you should check that the board does not extend far below the bag’s bottom.

Will the wheels scratch my backpack?

Not if you orient the board with the grip tape against the bag and the wheels pointing outward. The trucks and wheels can still scratch your clothes or hands if they hang too loose, so always tighten the attachment enough to prevent any swinging.

Is it safe to attach a skateboard to a school backpack?

It is safe if the backpack straps are wide enough and sewn to handle extra weight. A standard school backpack with thin, fragile straps can tear under the pressure of a board. Stick to bags with reinforced stitching or dedicated skateboard straps for everyday use.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.