How to Charge Ring Doorbell Battery? | Full Guide

Ring doorbells charge via a USB cable connected to any power source with at least 1 amp output.

For the full breakdown, see our best Battery Doorbell guide.

Ring makes charging simple: you charge the doorbell itself or its removable battery pack using the included USB or USB-C cable. The process works on all battery-powered Ring doorbells, though the exact steps differ slightly between models with removable packs and those with built-in batteries. Ring says a full charge can take up to 10 hours, so plugging in overnight is the practical approach.

The charging process comes down to three things: getting the battery out (or the doorbell off its bracket), connecting the cable, and watching for the light that signals a full charge. Below we break down the steps for each type, how long charging takes, and how to check your battery level in the Ring app.

Charging Steps for Removable Battery Packs

Ring’s Battery Doorbell Pro and Battery Doorbell Plus use a removable Quick Release Battery Pack. These are the easiest to charge because you don’t have to unmount the whole unit.

1. Remove the security screw from the bottom of the doorbell using the included screwdriver.
2. Lift the faceplate off the doorbell to expose the battery compartment.
3. Press the metal release tab to slide the battery pack out of the housing.
4. Connect the included charging cable to the battery’s charging port.
5. Plug the USB end into any power source delivering at least 1 amp.
6. Wait until the battery’s light shows solid green, then reinsert the battery and snap the faceplate back on.

The doorbell can take up to 60 seconds to power back on after you reinsert a fully charged pack. That delay is normal, so don’t assume something is wrong if the video doesn’t appear immediately.

Charging Built-In Battery Doorbells

Models like the standard Battery Doorbell and Battery Doorbell 4K Pro have a built-in rechargeable battery, meaning you charge the whole device rather than a separate pack. Ring’s steps for these models are slightly different:

1. Remove the security screw and lift the doorbell off its mounting bracket.
2. Locate the charging port on the back of the device; some models have a rubber cap covering it, which you should remove first.
3. Connect the included USB or USB-C cable to the charging port.
4. Plug into a USB power source with at least 1 amp output.
5. Wait until the circular LED shows a solid light, then reattach the doorbell to the bracket.

Ring’s official support material says a full charge can take up to 10 hours. If the doorbell isn’t charging, Ring recommends testing the outlet by plugging in another device and trying a different cable — a faulty cable or weak adapter is the most common cause of charging problems.

How Long Does Ring Battery Charging Take?

Ring states a full charge takes up to 10 hours, but the actual time depends on your power source and the model. Charging requires a minimum 1 amp output; using a weaker charger may prevent the battery from charging properly. Here’s a quick breakdown of what to expect:

Stick with the included cable and a standard USB wall adapter rated for at least 1 amp. If your doorbell is hardwired to existing wiring, it trickle-charges continuously, so manual charging is rarely needed. Hardwiring is supported on Battery Doorbell, Battery Doorbell Plus, and Battery Doorbell Pro at 8–24 VAC.

FAQ

Why won’t my Ring doorbell charge?

The most common cause is a weak charger — anything under 1 amp may not deliver enough power. Ring recommends testing the outlet with another device and trying a different cable. Also check for a rubber cap on the charging port, which some models include and you must remove before charging.

Can I charge my Ring doorbell without removing it?

If your model has a removable Quick Release Battery Pack, you can slide out just the battery and charge it separately, leaving the doorbell mounted. Models with built-in batteries must be lifted off the bracket entirely to access the charging port on the back of the device.

How do I check my Ring battery level?

Open the Ring app, tap the Menu icon, then tap Device Settings, followed by Device Health. Under the Power section you’ll see both Power Source and Battery Level, which tells you when it’s time to recharge before the doorbell dies.