Choose a medicine cabinet by measuring the vanity width and the space between faucet and lights, then match the cabinet width.
For the full breakdown, see our best 60 Medicine Cabinet guide.
The right medicine cabinet starts with a tape measure, not a style preference. Measure the vanity width, the vertical gap between the faucet and light fixture, and the wall depth. Then pick a cabinet that matches the vanity’s width or runs slightly narrower, leaving clearance so the door swings fully without hitting fixtures. Get these numbers right and the rest of the decision gets easy.
Start With the Vanity and Wall Space
Measure the vanity width first, since the cabinet should never exceed it. A cabinet wider than the vanity looks top-heavy and can collide with side walls or towel bars. Most guidance converges on one rule: match the vanity width or keep the cabinet slightly narrower.
Next, measure the vertical space between the bottom of the light fixture and the top of the faucet. The cabinet’s height must fit inside that gap with at least 3 inches of clearance between the cabinet’s bottom edge and the faucet top. Then measure the wall’s depth to know whether a standard cabinet will fit without protruding awkwardly into the room.
Write down all three numbers — vanity width, available height, and depth — before you browse anything. Most sizing mistakes trace back to skipping this step.
Recessed vs. Surface-Mount: Which Fits Your Wall?
The mounting type depends on your wall construction and the room’s layout. Recessed cabinets sit flush inside the wall cavity, which saves space in tight bathrooms. Surface-mount cabinets hang on the wall exterior and work in almost any room.
Recessed cabinets need a wall cavity deep enough to hold the box, so confirm the wall construction allows recessing before buying. Typical installation places the top of a recessed cabinet 72 inches above the floor. Surface-mount units require solid stud or anchor support — locate the studs, measure the distance between them, and check that the mounting screws will land on something sturdy. If the bathroom is tight, a recessed or corner cabinet beats a bulky surface-mount unit that eats floor space.
Door swing matters for both types. A cabinet can fit the wall opening perfectly and still be unusable if the door collides with plumbing, fixtures, or an adjacent wall when it opens.
Depth, Materials, and Features That Matter
Depth controls what fits inside. Standard medicine cabinets run 4 to 6 inches deep, with 4 inches the common sweet spot for everyday toiletries. Before settling on depth, think about what actually lives in your cabinet — electric shavers, contact lens solution, and tall bottles need more room than flat medicine packets. A shallow cabinet that looks sleek in the showroom can frustrate you every morning.
Moisture resistance should drive the material choice. Plastic, aluminum, wood, and stainless steel all appear in the market, but bathrooms stay humid, so prioritize materials that tolerate moisture without warping or corroding. Stainless steel and sealed aluminum handle bathroom conditions best; wood requires proper sealing to survive.
Adjustable shelves earn their keep more than any other feature. They let the interior adapt as your storage changes — tall bottles one month, flat supplies the next. Beyond that, choose from mirrored doors, anti-fog surfaces, integrated lighting, outlets, soft-close hinges, hidden compartments, and lockable storage for households with children.
Budget, Electrical Work, and Common Mistakes
Decide your budget before browsing so the high end doesn’t pull you off course.
Cabinets with integrated lighting or outlets add electrical requirements. Verify that the install location has a reserved power supply and that local electrical codes permit the connection. If the unit includes power features, plan the electrical work into the project timeline — it’s not a plug-and-play upgrade.
The most common mistakes all trace back to measuring or planning gaps:
- Buying before measuring vanity width, faucet height, and light clearance.
- Choosing depth without checking what needs to fit inside.
- Assuming every wall can accept a recessed cabinet.
- Overlooking door swing and side clearance.
- Prioritizing style over adjustable shelves and interior layout.
For households with small children, mount surface units high enough to stay out of reach, and consider lockable compartments for hazardous medications.
Once your measurements are locked in and you know which mounting type fits your wall, you’re ready to compare specific models.
Kohler’s medicine cabinet buying guide walks through the same measurement-first approach with product-specific guidance.
FAQs
What depth medicine cabinet should I buy?
Most cabinets run 4 to 6 inches deep, and 4 inches suits typical toiletries well. Measure your tallest items first — shavers, lotion bottles, and contact lens supplies need more room than flat medicine boxes. Choose depth based on what you actually store, not what looks proportional on the wall.
Can I install a recessed medicine cabinet in any wall?
No. Recessed cabinets need a wall cavity deep enough to hold the box, so interior walls usually work but exterior walls or walls with plumbing behind them often don’t. Knock on the wall and check for obstructions before committing. If recessing isn’t possible, a surface-mount cabinet with solid stud support solves the same problem.
How high should a medicine cabinet be mounted?
For recessed units, the common standard places the top of the cabinet 72 inches above the floor. Surface-mount cabinets should sit high enough to stay out of reach of small children. Adjust the height so the bottom clears the faucet by at least 3 inches and the top leaves room below the light fixture.
References & Sources
- Kohler. “Medicine Cabinets Buying Guide.” Covers measurement steps, sizing rules, mounting options, and installation guidance.
