To choose an air conditioner, match the room’s square footage to the required BTU range, decide between window, portable, ductless, or central types, and pick a unit with a high SEER2 rating for long-term energy savings.
Walk into any home store in July, and the wall of AC units can feel overwhelming. The trick is knowing three things before you shop: how big the room is, whether you own or rent, and how much you care about the electric bill. Here is the process that works for any room and budget, starting with the number that controls everything else.
Calculate Your Room’s BTU Needs First
The British Thermal Unit (BTU) rating is the cooling capacity—more BTU cools more space. Start by measuring the room’s length and width in feet, then multiply them for the square footage. General US room size benchmarks are:
- 150–350 sq ft (small bedroom/office): 5,000–8,000 BTU
- 350–550 sq ft (larger bedroom/playroom): 8,000–12,000 BTU
- 550–1,050 sq ft (living room/open-plan): 12,000–18,500 BTU
- 1,050–1,600 sq ft (large great room): 18,500–25,000 BTU
Adjust the baseline number up or down based on your real conditions. Rooms with heavy shade or few windows can use the lower end of each range.
Picking a unit slightly above the recommended minimum is fine—oversizing by 50% or 100% is where the trouble starts. An oversized AC cools the air too fast, runs short cycles, and never runs long enough to pull humidity out of the room. That muggy, clammy feeling you get is the giveaway. Undersizing is no better: the unit runs constantly, burns through electricity, and still can’t keep up on 95-degree afternoons. Use the next higher BTU bracket if you’re on the edge between two sizes.
Window, Portable, Ductless, or Central: Which Type Fits Your Home?
Your housing situation determines which type works. Renters who cannot modify walls or windows are limited to portable or window units. Homeowners planning zoned cooling—bedrooms at night, living room during the day—benefit from ductless split systems. Whole-house cooling requires central air and existing ductwork:
- Window units are the most efficient per BTU of any single-room option. They require a sash window that can support the weight and a nearby 15-amp outlet. Manufacturers almost always specify a direct plug-in—extension cords violate safety specs and risk electrical overload.
- Portable units (ones on casters with a hose to the window) are less efficient than window units, because the heat-generating compressor sits inside the room. Still, they are the best choice for apartments with sliding windows or HOA rules that forbid window units. Look for a dual-hose model if possible; single-hose units pull conditioned air out of the room as exhaust.
- Ductless split systems pair an outdoor condenser with one or more indoor wall-mounted heads. They need a 3-inch hole through an exterior wall but no ductwork. Multi-split setups let you cool multiple rooms from one outdoor unit, making them the quietest and most energy-efficient option for a floor or two of a house.
- Central air handles the whole house through ducts. If your home already has forced-air heating, adding central AC is straightforward. For new installations, a heat pump (which cools and heats) often beats a plain AC on long-term value.
Prioritize Energy Efficiency: SEER2 and ENERGY STAR
The SEER (Seasonal Energy Efficiency Ratio) rating tells you how much cooling you get per watt of electricity. In 2023 the US switched to SEER2, a stricter testing standard that reflects real-world duct losses and temperature conditions. For window units, look for the CEER rating (Combined Energy Efficiency Ratio) on the EnergyGuide label—it is the same idea, tuned for single-room units.
New US residential systems must meet a minimum SEER of 13 (or 14 SEER2 for many regions after 2023). High-efficiency units range from 20 to 24 SEER2 and are roughly 40–60% more efficient than the legal baseline.
Check the electrical compatibility before buying. Large window units over 12,000 BTU or central AC condensers may need a 20-amp dedicated circuit. If the outlet in the room is shared with other high-draw appliances, have a licensed electrician confirm the load. Running a high-BTU unit on an undersized circuit trips breakers and can damage the compressor.
Placement, Installation, and Filter Maintenance
Where you put the unit matters as much as which one you buy. Install a window unit in a north-facing or shaded window if possible, because direct sun on the condenser side cuts efficiency by 10–20%. Make sure the window sash is level and the support brackets or slide-in channels are secure—a falling window AC is both dangerous and a common renter deposit loss.
Noise ratings matter more than most shoppers realize. Look for models with multiple fan speeds: a high speed for rapid cooling when you walk into a hot room and a low speed for quiet overnight bedroom operation. The most common complaint about portable units is the compressor hum—check the decibel rating and buy a dual-hose unit, which tends to run quieter because the compressor works less hard.
Finally, clean or replace the filter every month during heavy use. A dirty filter restricts airflow, drops efficiency by up to 15%, and lets dust and pollen recirculate. Most filters slide out, wash with mild soap and water, and dry completely before reinstalling.
FAQs
What happens if I buy an AC unit with too many BTUs?
An oversized unit cools the air too quickly, so it shuts off before running long enough to remove humidity. The room feels cold and clammy instead of dry and comfortable, and the short-cycling wears out the compressor faster than normal use.
Is a portable air conditioner less efficient than a window unit?
Yes, generally. Single-hose portable units create negative pressure that pulls hot air from other rooms into the space, making the compressor work harder. Dual-hose portables are closer to window-unit efficiency but still slightly behind because the compressor sits inside the conditioned area.
Can I run an air conditioner with an extension cord?
The Department of Energy and most manufacturers warn against it. Extension cords can overheat under the amperage draw of a window or portable AC, especially during start-up. Plug the unit directly into a grounded wall outlet on a dedicated circuit whenever possible.
References & Sources
- Department of Energy. “Guide to Home Heating and Cooling.” Official sizing tables and SEER/SEER2 explanations for US residential systems.
- Air-Conditioning, Heating, and Refrigeration Institute (AHRI). “Seasonal Energy Efficiency Ratio.” Covers the SEER/SEER2 testing standard and what the ratings mean for homeowners.
- Wikipedia. “Seasonal Energy Efficiency Ratio.” Historical minimum standards and the 2023 SEER2 shift in the United States.
