How to Choose the Right Size Dog Bed for Your Dog? | Fit By Length

A dog bed fits correctly when it’s 6–12 inches longer than your dog’s nose-to-tail-base measurement.

Choosing a dog bed by weight alone is a recipe for a cramped, restless pup. The reliable way to pick the right size dog bed for your dog is to measure their body length from nose to the base of the tail, add 6–12 inches for stretching room, and let their sleeping style decide between sizes. Here’s the exact measuring method, the fit rules that matter, and the sizing charts worth trusting.

How to Measure Your Dog for a Bed

Measure your dog’s length from nose to base of tail, then add 6–12 inches. Grab a soft measuring tape, some treats, and a helper if your dog won’t hold still.

Have your dog stand naturally or lie in their normal sleeping position. Measure from the tip of the nose to the base of the tail — never include the tail tip, since that overstates length and pushes you into a larger, unnecessary bed. Then measure the widest point of the body, usually across the shoulders or chest, for the bed’s width requirement.

Add 6–12 inches to the length for the minimum internal bed size. Larger dogs and sprawlers need the upper end. If your measurement falls between sizes, round up — a slightly roomy bed beats one that forces your dog to curl tightly all night.

Sleeping Style Matters More Than Pounds

Weight alone won’t tell you which bed fits; sleeping posture and body width decide between sizes. A 50-pound dog that curls into a tight ball fits a much smaller bed than a 50-pound dog that sprawls out on its side.

  • Curlers — sleep fine in smaller, round or donut beds.
  • Side sleepers, stomach sleepers, and sprawlers — need extra length and width to stretch without hanging off the edge.
  • Bolster and cave beds — check the wall height against your dog’s shoulder height so they can step in and turn around comfortably.

Sprawlers should be sized off their widest point and full stretched length, not their curled profile. For puppies, size for the expected adult dimensions or use a washable temporary mat until growth finishes, which typically runs 10–18 months depending on breed. If the bed goes inside a crate, measure the crate’s interior, not the pan.

Published Size Charts From Trusted Brands

Real size charts show the same rule: length drives the fit, and weight ranges only indicate which dogs typically carry that length. These three published charts illustrate how brands translate measurements into sizes.

Brand & Size Bed Dimensions Max Dog Length / Weight
Kuranda Medium 35″ x 23″ 31″ long
Kuranda Large 40″ x 25″ 36″ long
Kuranda X-Large 44″ x 27″ 40″ long
Kuranda XX-Large 50″ x 36″ 46″ long
LAY LO Small 18″ x 24″ x 3.5″ Under 25 lbs
LAY LO Medium 27″ x 36″ x 4″ Under 60 lbs
LAY LO Large 27″ x 46″ x 4″ Under 95 lbs
LAY LO X-Large 35″ x 45″ x 4″ Under 150 lbs
Molly Mutt Med/Large 27″ x 36″ x 5″ 30–70 lbs

Kuranda’s chart shows the direct nose-to-tail rule: the Medium fits a 31-inch dog in a 35-inch bed, and each size up adds roughly 4–5 inches of length allowance. Molly Mutt’s duvet sizes track weight brackets, while LAY LO’s chart pairs dimensions with weight caps. The Foggy Dog adds 8–12 inches for medium-to-large dogs but only 4–6 for cats and small dogs. Bluewater Dog measures from base of neck to base of tail instead, so its dimensions run smaller than the nose-to-tail method.

Before you buy, compare your dog’s nose-to-tail measurement plus 6–12 inches against the product’s internal dimensions, not its external footprint. Bolsters and thick walls eat into usable space. If you know a 36-inch bed matches your dog’s stretched length, our tested breakdown of the best 36-inch dog bed options narrows the choice to models that actually hold up.

Common Sizing Mistakes to Skip

Most wrong-size beds come from measuring to the tail tip, adding too little room, or trusting pounds over length. Avoid these four errors and the fit lands right the first time.

  • Measuring the tail tip — adds 6–10 inches of phantom length and pushes you into a bed two sizes too big.
  • Sizing for the curled position — your dog will stretch at some point, and a smaller bed means that stretch hits the wall.
  • Weight-only sizing — a lean 70-pound dog can match the length of a stocky 50-pound dog; body length is the real number.
  • Ignoring sleep style — sprawlers need width plus length, and a narrow rectangle bed fails them regardless of weight range.

For orthopedic beds, heavier dogs need denser, thicker foam to avoid bottoming out, so pair the right length with a fill density that carries the dog’s weight. Bolster and cave beds can become barriers for dogs with mobility issues; measure the entry clearance and choose an open flat bed instead if getting in and out is a struggle.

FAQs

Should I size up if my dog is between bed sizes?

Yes. Rounding up gives your dog extra stretching and turning room, which matters more than a snug fit. A bed one size larger than the minimum still supports the dog properly, while a too-small bed forces constant curling and discomfort.

How do I measure a dog that won’t stay still?

Have a helper hold a treat at the dog’s nose level while they stand naturally. Use the treat to keep the head forward and still, then measure quickly from nose to tail base with a soft tape. For squirmy dogs, measure while they lie relaxed in their normal sleeping position instead.

Do bolster beds need different sizing than flat beds?

Yes. Bolster walls take up internal space and reduce the usable floor area, so a flat bed and a bolster bed with the same external dimensions fit differently. Measure the internal floor between the bolsters and check the wall height against your dog’s shoulder height so they can step in and turn around.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.