How to Clean BBQ Tools | Keep Them Rust-Free

Clean BBQ tools with warm soapy water, a non-abrasive scrub, and a thorough dry to stop rust.

Nothing kills a cookout faster than tongs that stick to a rib rack or a spatula with last month’s grease still welded to it. The proper way to handle barbecue tools comes down to one habit: a warm soapy soak, a gentle scrub, and a complete dry before they go back in the drawer. Skip that last step and you are inviting rust, and once that sets in, no amount of scrubbing brings the metal back.

The Core Wash Routine For BBQ Tools

The standard method works for nearly every metal tool you own. Fill a sink or bucket with warm to hot water and a few squirts of dish soap, then let your tongs, spatulas, and skewers soak for 15 to 30 minutes. Heavier grease may need up to an hour of soaking to loosen before you scrub.

After the soak, scrub with a sponge or soft-bristled brush, working into the hinges, grooves, and corners where grease hides. An old toothbrush is perfect for the tight spots around spring-loaded tongs. Rinse everything thoroughly with clean water, then dry immediately with a towel. The drying step is the one most people skip, and it is the main cause of rusty tools.

Stubborn Grease And Burnt-On Food

When a soak alone won’t cut it, reach for pantry staples before anything harsh. Baking soda works as a mild abrasive paste — mix it with a few drops of water and scrub the trouble spots, or sprinkle it dry on the tool and work it in with a damp sponge.

For greasy residue that resists soap, a 50/50 mix of white vinegar and warm water does the job. Let the tools sit in the solution for a few minutes, scrub, rinse, and dry. One manufacturer’s care guidance recommends a vinegar-and-water spray for grill surfaces and warns against oven cleaners, high-pressure washers, and harsh chemicals, so keep this method gentle on coated or seasoned finishes.

Cast iron and seasoned surfaces need extra care. Skip the abrasive scrubbers and use a specialized cast-iron brush or a soft cloth instead, since aggressive scouring strips the seasoning that keeps food from sticking.

Common Mistakes To Avoid

  • Leaving tools wet. Moisture is the direct cause of rust. Towel-dry every tool before storing it.
  • Using harsh chemicals. Oven cleaners and high-pressure washers damage finishes. Stick to dish soap, baking soda, or vinegar.
  • Skipping bristle checks. If you use a wire grill brush, always inspect it for loose bristles before the next cook — stray wires can end up in your food.
  • Soaking wood handles. Wood swells and cracks when submerged. Wash handled tools quickly and dry them upright so moisture drains away from the handle.

Grill cleaning follows the same logic when you are ready to tackle the grates themselves. Shut off the gas before wiping down a gas grill, and give hot surfaces time to cool so steam from your cleaning cloth doesn’t burn you.

How Often Should You Clean Them?

After every single use, at minimum. A quick wash right after dinner takes five minutes; letting grease bake on overnight turns it into a project. For tools used weekly, the routine above keeps them in shape for years. When you notice the oil coating wearing thin or the first speck of rust appearing, clean and re-oil right away.

If your current set is past saving, or you want tools that resist corrosion in the first place, our tested picks for the best BBQ tools cover the options worth buying.

FAQs

Can I put BBQ tools in the dishwasher?

Metal utensils survive the dishwasher, but it is not ideal. The detergent and heat can dull finishes and damage wooden handles, and tools left damp inside the machine after the cycle ends are prone to rust. Hand washing with soapy water and drying immediately keeps tools in better shape.

What is the best way to remove rust from BBQ tools?

How do I keep my BBQ tools from rusting?

Dry them completely with a towel right after washing, then wipe the metal surfaces with a thin layer of cooking oil. Store tools in a dry place rather than hanging them over a sink, and re-oil after each wash to maintain the protective film.

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.