Cleaning patio furniture starts with dry debris removal, then a mild soap-and-water wash, a thorough rinse, and full drying—with material-specific care for wood, metal, wicker, plastic, and fabric.
The right way to clean patio furniture depends entirely on what it’s made of. The one universal rule: remove loose dirt before you add water, then rinse everything off completely and let it dry before use.
Here’s the full method, plus exactly what each material can and can’t handle.
The Basic Cleaning Method That Works On Everything
Start dry. Brush, vacuum, or blow off loose dirt, leaves, and pollen before water touches the surface—skipping this turns dust into mud that scratches finishes as you scrub.
Then mix a cleaning solution of mild dish soap and warm water. A common ratio is 1/4 cup liquid dishwashing soap in a bucket of water. Wipe or scrub with a soft cloth, sponge, or soft-bristle brush, working top to bottom and reapplying solution as needed. Rinse with clean water or a garden hose until every trace of soap is gone, then dry completely—soap residue and lingering moisture both invite mildew.
How To Clean Patio Furniture By Material
Each material demands slightly different handling. The table below is the quick reference, with details after.
| Material | Cleaning Method | Critical Warning |
|---|---|---|
| Wood | Mild soap and water, scrub with the grain | Never soak—water causes warping |
| Metal | Warm soapy water, soft brush | Dry immediately to prevent rust |
| Wicker / rattan | Vacuum first, then gentle soap | Never soak or pressure-wash—weakens fibers |
| Plastic / resin | Sponge and soapy water | Wipe lightly rather than scrub hard |
| Fabric cushions | Vacuum, spot-treat, follow care tag | Check washability before machine washing |
Wood: Mild soap and water is all you need. Scrub in the direction of the grain and avoid soaking, which can warp the boards or damage the finish. Rinse quickly and dry.
Metal: Wash with warm soapy water and a soft brush, then dry immediately. Moisture left sitting on metal is the main cause of rust spots.
Wicker and rattan: Use a vacuum or soft brush first to pull debris from the weave. Clean gently with mild soap, but don’t soak—excess water weakens and warps the fibers. A pressure washer here is a fast way to ruin a chair.
Plastic and resin: A sponge or soft cloth with soapy water handles nearly everything. This material tolerates light scrubbing well and is the easiest of the group to keep clean.
Fabric cushions: Vacuum first, then spot-treat stains and wash according to the tag.
Before you start, inspect the furniture. Check for loose screws, cracks, rust spots, frayed wicker, and ripped seams. Repair those first; cleaning a broken piece just pushes dirt deeper into the damage.
Cleaning Cushions, Mold, And Stubborn Stains
Care tags are the controlling document for cushions. They’ll tell you “machine-washable,” “spot clean only,” the water temperature, and whether bleach is allowed. If the tag forbids it, bleach will void the fabric’s warranty.
Remove cushion covers when possible. For mildew stains, treat with distilled white vinegar and baking soda for up to 30 minutes, then wash and air-dry to prevent shrinkage. A solid homemade cushion cleaner: 1/2 cup dish soap, 1 cup white vinegar, and 1 gallon warm water for the full wash, plus a 50/50 warm water and white vinegar pretreat for dark stains.
For stubborn mold on nonremovable covers only, a bleach solution of 1 cup bleach, 1/4 cup mild detergent, and 1 gallon water works when the material explicitly allows it. Scrub, then hose off thoroughly.
If soap and water don’t lift buildup, switch to a cleaner made for the furniture’s specific material rather than reaching for a general-purpose abrasive. When you’re ready to look at affordable patio tables and chairs that fit a budget, our tested roundup is a good starting point.
One more mistake to avoid: letting cleaning solution dry on the furniture. Rinse it off promptly, every time.
FAQs
How do I remove mildew from patio furniture cushions?
Treat mildew spots with distilled white vinegar and baking soda for up to 30 minutes before washing. For nonremovable covers where the care label permits bleach, use a solution of 1 cup bleach, 1/4 cup mild detergent, and 1 gallon water. Always scrub, rinse thoroughly, and air-dry.
Can I use a pressure washer on patio furniture?
For most materials, a garden hose with a spray nozzle is gentler and safer.
How often should patio furniture be cleaned?
A full soap-and-water wash once or twice a year is enough for most climates, with spot cleaning as needed. Removing loose debris before each use season and covering furniture during off-months cuts down on mildew and buildup significantly.
References & Sources
- Consumer Reports. “How to Clean Your Deck and Outdoor Furniture.” Provides general cleaning methods and material-specific guidance.
- Wirecutter (NYT). “How to Clean Outdoor Patio Furniture Cushions.” Details cushion care, stain treatment, and cleaning-solution recipes.
- Wirecutter (NYT). “How to Clean Outdoor Furniture.” Offers broader outdoor-furniture care guidance and safety caveats.
