How to Cover Bed Frame | Four Ways To Hide It Fast

A bed skirt or wraparound cover is the fastest way to hide a bed frame, while fabric and a staple gun give the most polished DIY result.

An exposed metal frame or bare box spring can make a well-made bed look unfinished. Whether you want to hide the legs, disguise a tired frame, or change the whole look of the room, the right approach depends on how permanent you want the fix to be. A no-sew fabric wrap takes minutes; upholstering the frame takes an afternoon. Here’s how to pick the method that fits your goals — and how to pull it off without wrinkles, gaps, or visible staples.

What Is The Best Way To Cover A Bed Frame?

The best method depends on the look you want and how much work you’re willing to do. For a fast, removable solution, a bed skirt or wraparound cover is the clear winner. For a custom, built-in appearance, fabric and batting stapled to the frame is the better choice.

Here’s a quick comparison of the four main routes:

  • Bed skirt / dust ruffle — the classic method. It hides the frame and box spring with a fabric panel that sits between the mattress and box spring. Choose the correct bed size (twin, full, queen, king) and place it before returning the mattress.
  • Wraparound cover — a purchased cover that stretches around the frame and secures with straps, ties, a zipper, or Velcro. This is the fastest option for metal frames and requires no tools at all.
  • Fabric upholstery — the DIY route. You’ll need upholstery foam or batting, fabric cut to size, and a staple gun. Staple to the backside of the frame and trim the excess for a clean, custom finish.
  • Paint — strictly a visual disguise for metal legs or rails. It doesn’t physically cover anything, but it can make the frame blend into the floor or the bed skirt.

A decorative wrap using ribbon, fabric strips, or oversized bedding (a quilt or flat sheet draped to the floor) also works, but coverage is cosmetic and can wear quickly. Treat those as temporary fixes, not long-term solutions.

How To Cover A Metal Bed Frame With Fabric

Upholstering a metal bed frame takes about an afternoon and gives you a completely custom look that no store-bought cover can match. You’ll need upholstery foam or batting, your chosen fabric, adhesive spray if you’re adding padding, a staple gun, and scissors.

  1. Prep the frame. Remove the mattress and all bedding. Clean the frame, then sand any rough or rusty spots so staples grip well and the fabric won’t snag. Check for sharp edges or projecting parts that could tear the fabric later.
  2. Measure and cut oversized. Measure the frame’s length, width, and height to the floor. Add at least 4-6 inches on every side for wrapping around the back and securing. Cutting material too small is the most common mistake — it leaves the frame exposed and prevents a secure staple line.
  3. Attach padding if using it. Spray the frame with adhesive and press the foam or batting into place. Give it a few minutes to set before adding the fabric.
  4. Staple from the center outward. Lay the fabric over the frame, pull it taut, and staple the center of one side to the back or underside. Work outward from that center point, pulling gently as you go. This prevents wrinkles and bunching.
  5. Fold corners like gift wrap. At each corner, fold the fabric into a clean triangle and staple the folds flat on the underside. This is the step that separates a professional look from a droopy mess.
  6. Trim excess and check the front. Cut away overhang, then run your hand across the front surface. If you see staple heads near visible edges, pull them and re-staple further back.

For a quicker version of this method, drape a larger-than-bed quilt, blanket, or flat sheet so the excess drops to the floor. It won’t have the tailored look of stapled fabric, but it takes thirty seconds and works in a pinch.

Can You Hide An Adjustable Bed Frame?

Yes, but the rules change because the frame moves.

Before wrapping anything around an adjustable base, check that the covering:

  • Doesn’t block ventilation or access to the remote, controls, or under-bed storage.
  • Has enough slack that the head and foot sections can raise and lower without snagging.
  • Stays clear of moving joints and pinch points when the bed is in motion.

A bed skirt designed for adjustable bases is the safest pick because it attaches to the mattress platform rather than wrapping the moving frame itself. A tight fabric wrap around the base can bind the mechanism or create a pinch hazard, so test the full range of motion after installing any cover.

What Are The Most Common Bed Frame Cover Mistakes?

Most failures trace back to four fixable errors. Skipping the measurement step produces a skirt that’s too short or uneven. Forgetting to clean and sand the frame before painting or adhesive work kills adhesion and leaves a patchy finish. Cutting fabric too small makes stapling impossible and leaves gaps. And stapling close to visible edges puts fasteners on display — always staple to the back or underside, then trim.

If you’re using wallpaper, contact paper, or any adhesive-based decorative wrap, allow several hours of full drying time before loading the bed. These materials are best treated as light-duty cosmetic finishes — they may not hold up to abrasion or frequent contact. For a one-time fix that looks intentional and lasts, the fabric and staple gun method remains the gold standard.

If you’d rather buy than build, a good roundup of the best bed frame covers will point you toward tested options that install in minutes.

FAQs

Will a bed skirt hide a box spring too?

Yes. A bed skirt sits between the mattress and box spring, and its fabric panel drops to the floor, completely concealing both the box spring and the frame beneath it. This makes it the simplest way to hide both layers at once without any tools or permanent changes.

How much extra fabric should I buy for upholstering a frame?

Add at least 4 to 6 inches on every side of your measured frame dimensions. This overage gives you enough material to wrap around the back or underside for stapling, and it allows for corner folding. Cutting exactly to size almost always leaves you short.

Can I paint a metal bed frame instead of covering it?

Yes, but painting only disguises the frame visually — it doesn’t physically conceal it. For the best result, clean the frame, sand any rust or rough spots, apply a metal primer, paint, and seal with a clear coat. This works well for making legs blend into the floor or a dark rug.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.