How to Fold a Globber Kids Scooter Manual | Step-By-Step

Folding most Globber scooters takes about five seconds: press the deck button, then lift the handlebar until the lock clicks.

Globber’s folding system looks more complicated than it is. The mechanism is designed so a child or a parent can collapse the scooter one-handed for storage, car trunks, or carrying onto transit. The exact motion differs slightly between the FLOW FOLDABLE and FLOW FOLDABLE 125 models, but the core logic is identical. Below is the sequence straight from Globber’s official support documentation, plus the one adjustment that fixes a stiff hinge.

If you’re weighing this against other two-wheelers for your child, our tested roundup of the best 2 wheel scooter for kids compares foldability, weight limits, and ride quality across top models.

How the Folding Mechanism Works

Globber’s foldable scooters use a spring-loaded hinge where the T-bar handle meets the deck. A release button on the front of the deck unlocks the hinge; once unlocked, the entire stem rotates forward and down. A positive lock clicks back into place when the handlebar is fully upright, so the scooter can’t collapse mid-ride.

That automatic lock is the key safety feature. Globber’s manual is explicit that you must confirm the locking device is properly engaged before letting a child ride.

Folding and Unfolding Your Globber Scooter

These steps come from the official instruction manuals for the FLOW FOLDABLE (model 773-XXX) and FLOW FOLDABLE 125 (473-XXX). The process is the same in both directions.

To unfold the scooter:

1. Stand the scooter upright on its wheels.
2. Press and hold the small button located on the front of the deck.
3. While holding the button, lift the handlebar and front wheel upward in one smooth motion.
4. Keep lifting until you feel the T-bar handle click into the upright position — the automatic lock secures it.
5. Try to push the handlebar back down without pressing the button. If it won’t budge, the lock is engaged and the scooter is safe to ride.

To fold the scooter: press the same button on the front of the deck and swing the handlebar back down toward the rear wheel. That’s the entire reverse of the unfolding motion.

What to Do If the Folding Mechanism Feels Stiff

Friction in the hinge is common on new scooters or after a season of dust and sand. Globber says the fix is a single adjustment, not a replacement.

Look at the base of the T-bar where it meets the deck. You’ll find a small hex screw there. Using an M3 allen tool, give the screw a slight turn counterclockwise to loosen it. Test the fold. If the mechanism still drags, loosen it a touch more.

Two warnings from Globber’s manual matter here:

• Do not loosen the screw too much. Over-loosening makes the folding joint sloppy and wobbly while riding.
• Loosening too far can let the hex screw fall out entirely, which means you’ll need a replacement part.

Loosen in tiny increments — a quarter turn at a time is plenty — and stop the moment the hinge moves freely.

Safety Notes and the Trolley Mode Trick

Globber’s official instructions carry a few cautions worth repeating. Folding and unfolding should be done by a single person; having one person hold the deck while another pulls the handlebar is how fingers end up in the hinge. Keep children’s hands clear of the locking system while you fold, and always double-check that the locking devices are fully engaged before a ride.

The FLOW FOLDABLE 125 has one extra trick: trolley mode. When folded, you can grip the T-bar handle and pull the scooter along behind you like a wheeled suitcase. It’s a genuinely useful feature for subway commutes or school drop-offs where you need a free hand.

One compatibility note: Globber makes several folding mechanisms across its lineup. The instructions above apply specifically to the FLOW FOLDABLE (773-XXX) and FLOW FOLDABLE 125 (473-XXX). The PRIMO FOLDABLE, ELITE Foldable, MASTER, and ULTIMUM models use different hinge designs — consult their own manuals rather than assuming the same steps work.

FAQs

Can a child fold a Globber scooter by themselves?

Yes, the mechanism is light enough for most kids to operate, but Globber’s official guidance says folding should be done by a single person with hands kept clear of the hinge. For younger children, it’s safer for an adult to demonstrate the button press and lift motion first. The lock requires deliberate force to engage, so a very small child may struggle to get the handlebar fully upright.

Why won’t my Globber scooter stay folded?

If the handlebar keeps springing back up, the locking tab isn’t catching. The most common cause is a hex screw that’s been over-tightened, which jams the hinge slightly before it reaches the locked position. Loosen the hexagonal screw at the base of the T-bar with an M3 allen tool in quarter-turn increments until the mechanism clicks into place. If that doesn’t fix it, check for debris or grit in the hinge.

Is the folding mechanism the same on all Globber scooters?

No. The steps covered here apply only to the FLOW FOLDABLE (773-XXX) and FLOW FOLDABLE 125 (473-XXX). Globber’s PRIMO FOLDABLE, PRIMO FOLDABLE WOOD LIGHTS, ELITE Foldable, MASTER, and ULTIMUM models each have their own manual and may use a different hinge or locking system. Always match the instructions to your specific model number to avoid forcing a mechanism the wrong way.