How to Frame a 27 x 20 Puzzle? | Custom Framing Steps

Framing a 27 x 20 inch puzzle requires a custom frame, as standard sizes do not fit, but the process is straightforward with the right preparation and tools.

Puzzle dimensions of 27 by 20 inches sit in an awkward middle ground. Most ready-made frames are built for standard poster sizes, leaving your completed 1,000-piece project in need of a custom solution. The good news is that framing a 27 x 20 puzzle yourself saves money and lets you control every detail, from the glue to the hanging wire.

Here is the complete process, from flattening the pieces to mounting the finished puzzle on your wall.

Essential Supplies for Framing a 27×20 Puzzle

Before touching the puzzle, gather everything on this checklist:

Supply Purpose Key Spec
Puzzle Glue Seals pieces together permanently
Foam Brush Spreads glue evenly without streaks 1–2 inch wide brush works best
Rolling Pin Flattens the puzzle surface Ensures tight seams
Wax Paper Protects the table from glue drips Slide under puzzle before gluing
Backing Board Supports the puzzle permanently Cut to 27.4 x 20.4 inches, acid-free
Custom Frame Houses the mounted puzzle Interior must be exactly 27 x 20, depth > 0.5″
Hanging Hardware Mounts the frame to the wall Rated for the combined weight

Step-by-Step Guide to Gluing and Mounting

The key to a professional-looking frame is a flat, well-glued puzzle. WikiHow outlines the standard method for preparing and flipping a large puzzle.

  1. Flatten the puzzle. Slide wax paper underneath it on a clean, flat table. Use a rolling pin to gently press the entire surface, making sure the edges are snug and the pieces are flush.
  2. Apply the glue. Pour puzzle glue directly onto the center of the puzzle. Puzzle Warehouse advises covering the entire surface evenly and ensuring the glue seeps into every seam.
  3. Let it dry. Rushing this step can cause the puzzle to warp or pieces to lose their shape.
  4. Flip the puzzle. Once dry, sandwich the puzzle between two flat pieces of cardboard. Carefully flip it over and remove the wax paper backing.
  5. Mount it. Apply adhesive to the acid-free backing board, then center the puzzle onto it. Press firmly to create a permanent bond.
  6. Place it in the frame. Insert the mounted puzzle into your custom frame. Add spacers if needed to keep the cover from pressing against the puzzle surface, then secure the backing.

Choosing the Right Frame for a 27×20 Puzzle

Ready-made frames almost never match 27 x 20 inches. The only reliable route is a custom frame built to those exact interior dimensions.

You can find excellent options for a 27 x 20 puzzle frame that are built with the right depth and backing. When ordering, verify the interior measurement matches your puzzle exactly.

American Frame, a leading custom frame supplier, notes that a puzzle frame must be deep enough to hold the extra thickness of the board—typically at least 0.5 inches. They recommend using UV-protective acrylic with spacers to keep the glazing from pressing against the puzzle surface, which prevents damage over time. Acid-free backing materials are equally important for archival-quality preservation so the puzzle doesn’t yellow or degrade.

While a custom frame costs more than a ready-made one, the investment protects your work and makes it a permanent display piece. Once framed, attach hanging hardware rated for the total weight and use a level to ensure it hangs straight.

Common Mistakes to Avoid When Framing a Large Puzzle

Small errors can ruin hours of work. Keep these points in mind:

  • Gluing without wax paper. The puzzle will bond to the table, causing a mess and potential damage.
  • Over-applying glue. Too much glue can cause the puzzle to swell or warp. A thin, even coat is all you need.
  • Rushing drying time. Wait the full 4–6 hours. Touching or moving it too early can bend pieces out of shape.
  • Incorrect measurement. Measure the interior of the frame in at least three places to account for any slight variation.
  • Using a shallow frame. If the frame is too shallow, the glass will press into the puzzle, causing scratches or damage.

Framing a 27 x 20 puzzle takes patience, but the result is worth it. By using a custom frame and following the gluing steps carefully, your puzzle will stay preserved and displayed for years to come.

FAQs

Can I use a standard frame for a 27 x 20 puzzle?

A 27×20 puzzle requires a custom frame, as this is a non-standard size. Standard ready-made frames are designed for common poster or photo dimensions, so a custom order is necessary for a perfect fit.

Do I need to glue the front of the puzzle?

For cardboard puzzles, yes—applying puzzle glue to the front seals the pieces together. Always use an acid-free glue for archival safety.

Why does the frame need to be deeper than a standard picture frame?

A puzzle with a backing board is thicker than a standard print or photo. A deep-set frame (at least 0.5 inches of interior depth) prevents the glass from pressing against the puzzle, which can cause scratches and damage the surface over time.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.