To measure a washer’s cubic feet, use the cylinder formula π × r² × d after converting all measurements to feet, or look up the capacity on the model’s data plate or owner’s manual.
Whether you’re buying a new washer or checking if yours can handle a king-size comforter, knowing the drum’s cubic feet is the number that matters. One wrong measurement and you might overpay for capacity you don’t need — or buy a machine that can’t clean a queen duvet. We’ll cover the formula, where to cheat by reading the label, and the three measurement traps that throw most people off.
Use the Cylinder Formula for Any Washer Drum
Every washing machine drum is roughly a cylinder, so the same geometry class formula works on every model. Convert all measurements to feet before you start calculating.
Volume (cu. ft.) = π × r² × d
r = radius in feet (diameter ÷ 2), d = depth in feet, π ≈ 3.14
Step-by-Step: Measure Your Own Washer
- Measure the depth (d). For a front-loader: reach into the drum and measure from the back wall straight to the front opening. For a top-loader: measure from the bottom of the tub up to the top rim.
- Measure the diameter. Stretch your tape across the drum opening from one side to the other, passing through the center.
- Find the radius. Divide the diameter by 2.
- Square the radius. Multiply the radius by itself (r × r).
- Multiply by the depth. Take the squared radius and multiply it by the depth you measured.
- Multiply by pi. Multiply that result by 3.14 (or 3.1416 if you want a hair more precision). The final number is your washer’s cubic feet.
Worked Example
Say your front-loader has a drum 22 inches wide (diameter) and 18 inches deep. Convert to feet: 22 ÷ 12 = 1.83 ft diameter, so the radius is 0.915 ft. Depth: 18 ÷ 12 = 1.5 ft. Now the math: 0.915 × 0.915 = 0.837 (r²) × 1.5 = 1.2555 × 3.14 = 3.94 cu. ft..
The Label Shortcut: Where to Find the Capacity Instantly
You often don’t need a tape measure at all. Manufacturers stamp the cubic-foot capacity in several places. Check these spots in order:
- Owner’s manual — look in the “Technical Details” or “Product Description” section.
- Model number sticker — usually on the back panel, inside the door frame, or along the side of the cabinet. Search that number on the brand’s website for official specs.
- Data plate — some units have a small sticker inside the door or on the back that reads “Capacity: X cu. ft.”
If you’re in the market for a new compact unit around that 2.5 cu. ft. sweet spot for small apartments or vacation homes, see our picks for the best 2.5 cubic foot washers.
Three Measurement Mistakes That Wreck the Result
These are the errors that turn a simple calculation into nonsense:
- Measuring the outside of the cabinet. Capacity is the interior drum volume, not the machine’s exterior. Always reach inside.
- Forgetting to convert inches to feet. Plugging inches into the formula gives you a number in cubic inches, which is roughly 1,728 times too large. Always divide by 12 first.
- Squaring the diameter instead of the radius. If you use the full diameter in the r² slot, your volume quadruples. Divide by 2 first.
And one more thing worth knowing: cubic feet isn’t the same as load weight.
When to Skip the Math and Look It Up Online
If you still own the washer’s model number (find it on the back panel or door frame), typing it into a search engine with “specs” usually pulls up the official data sheet in seconds. Maytag, Whirlpool, and other major brands publish capacity specs for every model they’ve made. This is the fastest method and avoids any tape-measure math entirely.
References & Sources
- Maytag. “Washing Machine Capacity Guide.” Covers the cylinder formula and typical capacity ranges.
- The Spruce. “How to Calculate Washer Tub Capacity.” Provides step-by-step measurement instructions.
- Whirlpool. “Laundry Sizing Guide.” Explains capacity categories and load weight limits.
